Hello Venkat, Below is my working configuration for q931 euro-isdn. Please have a look at: http://wiki.sangoma.com/wanpipe-freeswitch-config && http://wiki.sangoma.com/wanpipe-pri-daemon-options openzap.conf --------------------------------- [span wanpipe PRI_1] name => PRI_1 number => 1 trunk_type => e1 b-channel => 1:1-15 b-channel => 1:17-31 openzap.conf.xml ----------------------------------- <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <boost_spans> <span name="PRI_1"> <!-- Log Levels: none, alert, crit, err, warning, notice, info, debug --> <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="debug"/> <param name="mode" value="user"/> <param name="dialect" value="q931"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- my mystical telco, they insisting on TON = NPI = 0 --> <param name="outbound-called-ton" value="unknown"/> <param name="outbound-called-npi" value="unknown"/> <param name="outbound-rdnis-ton" value="unknown"/> <param name="outbound-rdnis-npi" value="unknown"/> <param name="outbound-calling-ton" value="unknown"/> <param name="outbound-calling-npi" value="unknown"/> </span> </boost_spans> </configuration> dialplan --------------- <extension name="priout"> <condition field="destination_number" expression="(?!4970000)\d{7}"> <action application="set" data="effective_caller_id_number=4970000"/> <action application="set" data="effective_caller_id_name=4970000"/> <action application="bridge" data="openzap/PRI_1/a/${destination_number}@g1"/> </condition> </extension> Best Regards, Nazim On 07/19/2010 01:36 PM, ovvenkat wrote:
Hi to all,
I am very new to this world. I am not able to do outbound call using Sangoma A101 card and freeSwitch.
Here is the procedure I have followed
*openzap.conf*
[span wanpipe smg_prid] name => smg_prid trunk_type =>e1 b-channel => 1:1-15 d-chennel => 1:16 b-channel => 1:17-31
I have one span in *openzap.conf.xml*
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <boot_spans> <span id="smg_prid"/> <param name="node" value="cpe"/> <param name="switch" value="ni1"> <param name="dialplan" value="XML"> <param name="context" value="default"> </span> <boot_spans> <analog_spans> </analog_spans> </configuration > </analog_spans>
*My Dial plan is
*added one extension in default.xml file
<extension name="outgoing-pri"> <condition field="destination_number" expression="12345"> <action application="bridge" data="OpenZAP/smg_prid/a/<my number>@g1"/> </condition> </extension>
When i trying to call "12345" I am getting following output in *fs_cli* ,
2010-07-19 01:50:17.531933 [DEBUG] sofia.c:5992 IP 192.168.1.100 Rejected by acl "domains". Falling back to Digest auth. 2010-07-19 01:50:17.562934 [DEBUG] sofia.c:5992 IP 192.168.1.100 Rejected by acl "domains". Falling back to Digest auth. 2010-07-19 01:50:17.581933 [NOTICE] switch_channel.c:776 New Channel sofia/internal/1000@192.168.1.110 <mailto:1000@192.168.1.110> [36c842f2-8078-4ca0-a6e0-36f5d65f81f8] 2010-07-19 01:50:17.583936 [DEBUG] switch_core_state_machine.c:314 (sofia/internal/1000@192.168.1.110 <mailto:1000@192.168.1.110>) Running State Change CS_NEW 2010-07-19 01:50:17.583936 [DEBUG] switch_core_state_machine.c:320 (sofia/internal/1000@192.168.1.110 <mailto:1000@192.168.1.110>) State NEW 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4310 Channel sofia/internal/1000@192.168.1.110 <mailto:1000@192.168.1.110> entering state [received][100] 2010-07-19 01:50:17.615937 [DEBUG] sofia.c:4321 Remote SDP: v=0