So can you put txgain and rxgain in the freetdm.conf? More documentation on that .conf file would be greatly appreciated. Moises Silva <moises.silva@gmail.com> wrote:
On Wed, Sep 22, 2010 at 12:17 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
I think you are getting a placebo effect because wanpipe module does not even have a param to control gain. only the zaptel (zt) i/o module does.
In fact, I added that in software. So now is independent from the I/O settings.
His problem is setting the parameters *after* the channel declarations.
[span wanpipe telus1] trunk_type => T1 b-channel => 1:1-23 d-channel => 1:24 rxgain => 11.0 txgain => 7.0
The tx and rx gains parameters must be before.
[span wanpipe telus1] trunk_type => T1 rxgain => 11.0 txgain => 7.0 b-channel => 1:1-23 d-channel => 1:24
The config parser needs to be improved to read the whole span settings before applying it to channels so it does not depend on the order, but until that is done, that's the way it works.
Also, openzap is deprecated, as far as I am concerned, so if something else does not work, move on to freetdm before complaining here :-)
Moises Silva Senior Software Engineer Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. moy@sangoma.com
---------------------------------------------------- Alternatives:
---------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com