Hi FreeSwitch community, We are using FreeSwitch with FreeTDM on Windows 7 machine. In the machine is installed Sangoma A102. My question is how or where to configure "inter-digits time" for dialling of the number? Because when we dial some number FS suddenly decides that it has all digits and it changes state from COLLECT to RING. You can see it in log: It gets first 4 digits "0015" and when he finished collecting it had 5 digits "00151". 14:44:51.785156 [INFO] ftmod_sangoma_isdn_stack_rcv.c:75 [s1c20][1:21] Received SETUP (suId:1 suInstId:0 spInstId:1) 14:44:51.785156 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:57 [s1c20][1:21] Processing SETUP (suId:1 suInstId:0 spInstId:1) 14:44:51.785156 [INFO] ftmod_sangoma_isdn_stack_hndl.c:142 [s1c20][1:21] Incoming call: Called No:[0015] Calling No:[99994] 14:44:51.785156 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:197 [s1c20][1:21] Changed state from DOWN to COLLECT 14:44:51.785156 [DEBUG] ftdm_state.c:511 [s1c20][1:21] Executing state processor for COLLECT 14:44:51.785156 [DEBUG] ftmod_sangoma_isdn.c:623 [s1c20][1:21] processing state change to COLLECT 14:44:51.785156 [INFO] ftmod_sangoma_isdn_stack_out.c:102 [s1c20][1:21] Sending SETUP ACK (suId:1 suInstId:1 spInstId:1 dchan:1 ces:0) 14:44:51.785156 [DEBUG] ftmod_sangoma_isdn.c:884 [s1c20][1:21] Completed state change from DOWN to COLLECT in 0ms 14:44:51.928710 [INFO] ftmod_sangoma_isdn_stack_rcv.c:172 [s1c20][1:21] Received INFO (suId:1 suInstId:1 spInstId:1 ces:0) 14:44:51.928710 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:368 [s1c20][1:21] Processing INFO (suId:1 suInstId:1 spInstId:1 ces:0) 14:44:51.928710 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:464 [s1c20][1:21] Processing INFO (suId:1 suInstId:1 spInstId:1) 14:44:51.928710 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:477 [s1c20][1:21] Changed state from COLLECT to RING 14:44:51.928710 [DEBUG] ftdm_state.c:511 [s1c20][1:21] Executing state processor for RING 14:44:51.928710 [DEBUG] ftmod_sangoma_isdn.c:623 [s1c20][1:21] processing state change to RING 14:44:51.928710 [DEBUG] ftmod_sangoma_isdn.c:647 [s1c20][1:21] Sending incoming call from 99994 to 00151 to FTDM core 14:44:51.928710 [DEBUG] ftmod_sangoma_isdn.c:884 [s1c20][1:21] Completed state change from COLLECT to RING in 0ms 14:44:51.928710 [DEBUG] mod_freetdm.c:2268 got clear channel sig [START] 14:44:51.928710 [DEBUG] ftdm_io.c:3061 [s1c20][1:21] Enabled software DTMF detector 14:44:51.928710 [DEBUG] mod_freetdm.c:391 Set codec PCMA 20ms 14:44:51.928710 [DEBUG] mod_freetdm.c:1625 Connect inbound channel FreeTDM/1:20/00151 My freetdm.conf.xml <config_profiles> <profile name="myProfile"> <param name="switchtype" value="euroisdn"/> <param name="signalling" value="cpe"/> <param name="overlap" value="yes"/> <param name="min_digits" value="0"/> </profile> </config_profiles> <sangoma_pri_spans> <span name="wanpipe1" cfgprofile="myProfile"> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> <span name="wanpipe2" cfgprofile="myProfile"> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </sangoma_pri_spans> Thanks for help !!! Regards, Stefan