Hi, I have compiled freeswitch trunk from svn on debian. I am trying to convert the following simple working asterisk config to freeswitch and I would be really grateful if someone could point me in the right direction: pbx:/etc/asterisk# cat iax.conf [general] bindport=4569 bindaddr=my.ip.address jitterbuffer=yes disallow=all allow=ulaw allow=alaw context=deadend [voiptalk] type=peer username=XXXXXX secret=XXXXXX host=iax.voiptalk.org [0843XXXXXX] type=friend username=08433XXXXXX context=incoming requirecalltoken=auto [1000] type=friend host=dynamic mailbox=1000 secret=XXXXXX context=phones requirecalltoken=auto pbx:/etc/asterisk# cat extensions.conf [general] autofallthrough=yes [outgoing] exten => _0[1-9].,1,Dial(IAX2/XXXXXX@voiptalk/44${EXTEN:1}) exten => _00.,1,Dial(IAX2/XXXXXX@voiptalk/${EXTEN:2}) [internal] exten => 901,1,VoiceMailMain() exten => 901,2,Hangup() exten => 902,1,MeetMe(1234,cdM) exten => 902,2,Hangup() [incoming] exten => XXXXXXXX,1,Dial(IAX2/1000,30) exten => XXXXXXXX,2,VoiceMail(1000@internal) [phones] include => internal include => outgoing pbx:/etc/asterisk# cat voicemail.conf [internal] 1000 => XXXX,Matt,me@myomain.com format=wav49 maxsilence=0 Sorry to be a bonehead, but I'm struggling with the wiki docs (especially with regard to IAX2) and also concerned about security. I installed the samples when I compiled freeswitch but wondering if that is a security risk as the PBX box is on the public internet? Many thanks, Matt