I thought I'd post this for people reference. I've configured opsview (Nagios) to monitor my current sessions & graph it so I can match performance & usage. On the Freeswitch server install the opsview-agent & set service to auto start Create check_freeswitch_sessions.sh in /usr/local/nagios/libexec & chkmod +x the script -------------------------------------------------------- #!/bin/bash set fsStatus=" " /usr/local/freeswitch/bin/fs_cli -x "show calls count" > /tmp/fsStatus if [ $? -ne 0 ]; then echo "Critical: Freeswitch not responding!" rm /tmp/fsStatus exit -1 fi fsCalls=`grep "total."</tmp/fsStatus` #Strip unwanted chars from the channels responses to get pure ints. fsCalls=${fsCalls/ total./} # Build a message up message="Active Sessions: $fsCalls" echo $message rm /tmp/fsStatus #exit $fsCalls exit 0 -------------------------------------------------------- The add the following to /usr/local/nagios/nrpe.cfg -------------------------------------------------------- command[check_freeswitch_sessions]=/usr/local/nagios/libexec/check_freeswitch_Sessions.sh -------------------------------------------------------- On Opsview server use check_nrpe service check to remotely run the check_freeswitch_sessions service check. Then on your opsview server edit /usr/local/nagios/etc/map and add the following -------------------------------------------------------- # Service type: Freeswitch Sessions # ouput:Active Sessions: 0 /output:Active.*?(\d+)/ and push @s, [ "session", [ "sessions", GAUGE, $1 ] ]; -------------------------------------------------------- *Alex Ynema** *| IT Consultant alex@opensystems.net.au Level 1, 409-411 Oxford Street, Mount Hawthorne WA 6016 Office: +61 8 9427 2500 Mobile: +61 404 796 894 <http://www.ynema.net/> <http://www.ynema.net/>IT Consultant for Open Systems Support www.opensystems.net.au