On Tue, Sep 24, 2019 at 2:30 PM Per Modin <per@wgtwo.com> wrote:
we used to run on S3, where we mounted the recordings with s3fs-fuse[1] which we ran successfully on 1.6.20.
HOWEVER, when we updated to 1.8.5 we ran into problems with the wave files, the media stream was not saved and we ended up with empty media containers, with only some meta data of around 250 bytes ended up being saved. This issue affected about half of all recordings, and we found no correlation in regards to codecs used etc. If this was an issue with configuration, s3fs-fuse or Freeswitch we didn't investigate.
We solved this by moving the storage from S3 to EFS, and are currently running it in production without issues in that regard.
That is an option, but you also can get around the stream issue with and audio_spool_path: <X-PRE-PROCESS cmd="set" data="audio_spool_path=/tmp"/> -Nathan