The device(s) list fine with aplay -l and also as I mentioned sound files do play out the speaker with aplay. When I built portaudio standalone from portaudio's website, pa_devs also lists the sound devices fine. I tried running FS as root and still same issue. ******************************************* Brett Wilson IT Department Launch 3 Ventures, LLC 134 Myer Street Hackensack, NJ 07601 Phone: 877.878.9134 Fax: 646.536.3866 Email: Brett.Wilson@launch3.net AOL IM: Brett.Wilson@launch3.net www.Launch3.net www.Launch3telecom.com ******************************************* -----Original Message----- From: Mitch Capper [mailto:mitch.capper@gmail.com] Sent: Friday, August 17, 2012 10:48 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] mod_portaudio cannot find input or output device The first problem may be the default config you are using is going to cause the console to load with a lot of errors that may just add confusion. Portaudio streams are enabled but not documented by default and are throwing atleast some of those errors (and for most are not needed). Try a much simple PA config like: <configuration name="portaudio.conf" description="Soundcard Endpoint"> <settings> <param name="ring-file" value="tone_stream://%(2000,4000,440.0,480.0);loops=20"/> <param name="ring-interval" value="5"/> <param name="hold-file" value="$${hold_music}"/> <param name="dialplan" value="XML"/> <param name="sample-rate" value="24000"/> <param name="codec-ms" value="20"/> </settings> </configuration> Then see if you can get portaudio loading, however I believe the inability to find any audio devices is kicking the error out. You would want to try running aplay -l from a command line to make sure some audio devices are listed. In addition try running freeswitch as root without the -u flag and ensure that its not a permissions problem. ~Mitch On Fri, Aug 17, 2012 at 5:45 AM, Patrick Lists <freeswitch-list@puzzled.xs4all.nl> wrote:
On 17-08-12 14:18, Brett Wilson wrote: [snip]
*freeswitch@internal> load mod_portaudio*
+OK Reloading XML
-ERR [module load file routine returned an error]
That ERR does not look good. Iirc I have seen that with mod_java when starting FreeSWITCH. Subsequent manual loading of the mod_java module went fine. But in your case you are already manually loading the module.
*2012-08-17 08:15:23.591770 [ERR] mod_portaudio.c:1767 Cannot find an input device*
*2012-08-17 08:15:23.591770 [ERR] mod_portaudio.c:1777 Cannot find an output device*
Did you set the input/output devices? Lot's of info on the wiki:
http://wiki.freeswitch.org/wiki/FreeSwitch_Enpoint_Portaudio#List_the_ available_devices
Regards, Patrick
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org