Hi Guys, Just wondering if its possible to use the user dial-string command to do call pickup after a call has been sent to a hunt group using the bridge and group_call function? So basically a call to group 5000, sends calls to extension 1000 and 2000 which are in the group. This all works fine but I want to be able to pickup the call by dialling *8 then either 1000 or 2000. I can do this if I am not using the group_call function, and its just a normal inbound call to the extension I want to pickup, so just wondered if its possible to do a pickup of one of the extensions in the group? To start the group_call Im using in my dialplan; Dialing 5000 results in; <action application="bridge" data="${group_call(huntgroup1@test.com+A}"/> Which then rings both extension 1000 and 2000 which have the dial-string defined; <param name="dial-string" value="sofia/internal/${dialed_user}@test.com,pickup/${dialed_user}@test.com"/> If I add pickup after group_call, this allows be to pickup extension 5000, but I need to be able to create the pickup channel using the dial-string, am I doing this wrong or does anyone have an idea how to achieve this? And just to be clear pickup works fine for normal inbound calls, its just when implementing group_call. Many thanks Jon