On 24 February 2010 20:25, François Legal <devel@thom.fr.eu.org> wrote:
I use sangoma card and the openzap file is generated by the Setup script from sangoma driver. It seems that the terminology used by zaptel is not used in wanpipe configuration.
Yes, that is correct.
I have an A400 card with an FXO module (providing ports 11 and 12) and an FXS module (providing ports 9 and 10)
My openzap.conf is like this :
[span wanpipe FXS] name => Analog phone 1 number => 9000 fxs-channel => 1:9 name => Analog phone 2 number => 9001 fxs-channel => 1:10
[span wanpipe FXO] name => POTS line 1 number => 1234567890 fxo-channel => 1:11 name => POTS line 2 number => 0987654321 fxo-channel => 1:12
So ports 9 and 10 are actually FXO ports - extension ports; ports 11 and 12 are FXS ports, or telephone lines. This is what I have been saying. Oh, wait, no it isn't. Looks like I was confused. :-( It matches my config however. Hopefully this fixed the problems with the wiki: http://wiki.freeswitch.org/index.php?title=Openzap.conf_Examples&diff=18693&... My guess is that this change is needed also (not absolutely sure here): http://wiki.freeswitch.org/index.php?title=Openzap.conf_Examples&diff=18694&... -- Brian May <brian@microcomaustralia.com.au>