Thank you for the link. I googled through but could not find anything relevant. So then with my FXS port, do I have to, when a call is over, bridge the channel (which is either A or B leg depending on the cases) to an extension with for instance <action application="playback" data="tone_stream://%(500,500,440)"/> Thanks François De : freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] De la part de Michael Collins Envoyé : vendredi 15 janvier 2010 02:24 À : freeswitch-users@lists.freeswitch.org Objet : Re: [Freeswitch-users] No hangup tone after zap channel closed, tones in general On Wed, Jan 13, 2010 at 10:25 AM, François Legal <devel@thom.fr.eu.org> wrote: Hello, How shall I do to get a hangup tone on an FXS port after the channel is closed ? Is there something specific to configure in openzap ? For instance, if I call the following extension from an FXS port : <!-- Send a 180 and let the far end generate ringback. --> <extension name="ringback_180"> <condition field="destination_number" expression="^9980$"> <action application="ring_ready"/> <action application="sleep" data="20000"/> <action application="answer"/> <action application="sleep" data="1000"/> <action application="playback" data="voicemail/vm-goodbye.wav"/> <action application="hangup"/> </condition> </extension> I get no tone after the hangup application is called. I also wonder if there is some documentation on the tones.conf file format, and about the variables uk-ring, us-ring, bong-ring, sit in vars.xml (when are they used, what is the syntax). I could not find any info on wiki. http://wiki.freeswitch.org/wiki/TGML -MC