I noticed the 'oz list' output in that span type is 'ss7 (boost)'. How can I change this to isdn? On Wed, Jan 20, 2010 at 12:43 PM, Thangappan.M <thangappan143@gmail.com>wrote:
I found the error in it. The file name is used as openzap.conf.xml ( smg_prid is specified here) and another file name as openzap.conf.wiki.xml ( PRI_1 span is specified here ). FreeSWITCH referred the PRI_1 span from openzap.conf.wiki.xml file.
Now the another problem is raised here. When I was using oz list command , the details of the smg_prid shown. When I was using 'oz dump smg_prid' command it shows all the channels' details. But all the channels' states are DOWN. why? How can I make it the states to UP?
When I was making the call , the number is busy message was get. The call was not at all landed to the freeswitch.
Dial plan Example: ------------------------------- <extension name="PRI_Testing"> <condition field="destination_number" expression="^39114600$"> <action application="playback" data="ivr-welcome_to_freeswitch"/> </condition> </extension>
Please help me...........
*Output Reference:* http://pastebin.org/79074
On Wed, Jan 20, 2010 at 11:25 AM, Thangappan.M <thangappan143@gmail.com>wrote:
Dear all,
I have successfully configured wanpipe with freeswitch. When I was the running wancfg_fs script the following files openzap.conf , autoload_confg/openzap.conf.xml , /etc/wanpipe/wanpipe1.xml, smg_pri.conf are created.
I started the wanrouter command then executed the freeswitch. When I was executing freeswitch mod_openzap.c said the error as "Error for finding the span id. name:PRI_1". But in the openzap.conf and openzap.conf.xml files the span name is smg_prid.
Why the freeswitch is referring the span name as PRI_1 ? Whether this has to configured in anywhere?
In the freeswitch CLI using oz command I tried to dump the PRI_1 span id but it said te error as "PRI_1 is not found". When I was trying the command 'oz dump smg_prid' all the channel states and details shown.
It seems that smg_prid span configured in openzap perfectly (Its my assumption). Then Why freeswitch is referring the span name as PRI_1.
DID I MAKE ANY MISTAKE OR DID I MISS ANYTHING TO DO?
Could anyone please help me?
REFERENCE:
openzap.conf [span wanpipe smg_prid] name => smg_prid trunk_type =>e1 b-channel => 1:1-15 b-channel => 1:17-31
openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <boost_spans> <span id="smg_prid"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </boost_spans> <analog_spans> </analog_spans> </configuration>
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M