Hi, the problem is the same. What can I do to send a SIP Update to a call leg. Manual or automatic after a dialplan-, or uuid_bridge command? Just for info, the first leg is coming from a trunk and the second leg go back to the trunk... Thanks a lot Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Alexander Haugg Gesendet: Montag, 20. Juli 2015 09:15 An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Betreff: [Freeswitch-users] No SIP UPDATE will send Hi all, I have the problem, that the freeSwitch don't send a SIP UPDATE to the PBX. Scenario: PBX (Siemens H3K) is connected via SIP trunking to the FreeSwitch. If I have two Legs from the H3K to the Freeswitch I'm using the uuid_bridge command to connect this two legs (works fine), but the call legs will not updated via SIP UPDATE. The PBX have no information to update the displays on the telephones. The target number (toHeader) was the routing number from the H3K to the freeswitch. Now I need a SIP UPDATE from FreeSwitch to PBX to actualize the toHeader with the new partner number (the partner number is the fromHeader of the other leg). In the sofia profile I was try it with the parameter <param name="send-display-update" value="true"/> and without this parameter (in the source code the default is "true") What can I do to force an UPDATE to the call legs? Version of the FreeSwitch FreeSWITCH Version 1.5.15b+git~20150121T080154Z~90ab1d16f5~64bit (git 90ab1d1 2015-01-21 08:01:54Z 64bit) In the INVITE from the PBX the ALLOW header includes the UPDATE Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTER, REFER, INFO, PRACK, UPDATE Many thanks!