Again, thank you for your reply. OK, I'll make the change to ext-sip-ip and ext-rtp-ip and make them the same IP address as sip-ip and rtp-ip respectively I'll will readily set up 2 profiles once I understand how to do so. There is a simple description named: SETTING THE SIP PROFILES TO USE DIFFERENT ETHERNET PORTS on the previous FreeSWITCH wiki ( http://wiki.freeswitch.org/wiki/Multi_home_tutorial#INTERNAL_LAN ) And I did what they said to do there (except for making the mistake of not following their ext-sip-ip & ext-rtp-ip settings). But that did not seem to do what I need to do. I'll try it again with the ext- settings corrected and see how it goes. What about the phone registration problem where it cannot find the user [105@192.168.nn.nn] ? I thought that I had everything in place for that to work, but I cannot register any SIP phones because of that problem. Thanks, TF -------------------------------------------- On Tue, 3/31/15, Steven Ayre <steveayre@gmail.com> wrote: Subject: Re: [Freeswitch-users] Question re: local_ip_v4 To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, March 31, 2015, 12:17 PM You want to have ext-sip-ip and ext-rtp-ip the same as sip-ip and rtp-ip. Those settings are to handle some NAT situations where you're listening on your LAN IP but outside are visible on your nated WAN IP.
From what you descibed your box is assigned your external address directly in which case you need 2 profiles