Hi, We have 1 PRI and 3 Analog lines. We are using Sangoma A200 with 4FXS and 4FXO ports. Also, we have a Sangoma A101 card. Incoming calls are working fine. But, we are unable to dial out. Here is our dial plan <extension name="outgoing_bsnl"> <condition field="destination_number" expression="^9(\d{10})$"> <action application="bridge" data="freetdm/3/1/$1"/> </condition> </extension> Here are the logs from mod_freetdm. 2011-12-07 14:03:54.429502 [DEBUG] mod_freetdm.c:1227 Connect outbound channel FreeTDM/3:1/9449905000 2011-12-07 14:03:54.429502 [DEBUG] mod_freetdm.c:1236 (FreeTDM/3:1/9449905000) State Change CS_NEW -> CS_INIT 2011-12-07 14:03:54.429502 [DEBUG] mod_freetdm.c:1253 Attached session 32ad9cea-20ae-11e1-b313-21737ba18370 to channel 3:1 2011-12-07 14:03:54.929503 [DEBUG] mod_freetdm.c:435 (FreeTDM/3:1/9449905000) State Change CS_INIT -> CS_ROUTING 2011-12-07 14:03:54.929503 [DEBUG] mod_freetdm.c:458 FreeTDM/3:1/9449905000 CHANNEL ROUTING 2011-12-07 14:03:59.489509 [DEBUG] mod_freetdm.c:1992 got FXO sig 3:1 [STOP] 2011-12-07 14:03:59.489509 [NOTICE] mod_freetdm.c:2013 Hangup FreeTDM/3:1/9449905000 [CS_CONSUME_MEDIA] [NORMAL_CIRCUIT_CONGESTION] I don't know where we are making mistake. Thanks, Ryan