Nothing at the moment, but it might be scriptable. On 22 October 2014 11:00, kthofer <karl-theo_hofer@inteli-sim.com> wrote:
Hi Steven, Florent ok but I have some 100 channels on the box simultaneously that will be very difficult to make out the uuids needed as well the printout are in one line is there a possibility to show the result in a table or something more reader friendly?
With best regards
Karl Theo Hofer
Florent Krieg skrev 2014-10-22 11:34:
Steven's right. I thought about a very basic use case when writing my message.
Florent
2014-10-22 10:59 GMT+02:00 Steven Ayre <steveayre@gmail.com> <steveayre@gmail.com>:
'if it's the same then there's no transcoding'
Also depending on the applications in use - playback, conference, eavesdrop etc will also require transcoding.
On 21 October 2014 17:52, Florent Krieg <flokrrr@gmail.com> <flokrrr@gmail.com> wrote:
Hi Karl,
You can for instance run a 'show channels' in the CLI, find out the two uuids related to both legs of your call and check the codec used for each of them, if it's the same then there's no transcoding (assuming ptime is identical on both sides as well). I'm pretty sure there must be a better way to do it, but I disabled transcoding on my FS profiles so that's what I firstly thought about.
Florent
2014-10-21 14:05 GMT+02:00 kthofer <karl-theo_hofer@inteli-sim.com> <karl-theo_hofer@inteli-sim.com>:
Hi There
I am looking for a simple way to see if FS is actual transcoding between two channels in our usecase FS is setting up 2 outbound calls and after the A-leg has answered we set up a second outgoing call when answered we bridge the 2 legs. I can not see if FS is transcoding or not with out doing a siptrace on the 2 legs.
--
_________________________________________________________________________ Professional FreeSWITCH Consulting Services:consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-powered IP PBX: The CudaTel Communication Serverhttp://www.cudatel.com
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services:consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-powered IP PBX: The CudaTel Communication Serverhttp://www.cudatel.com
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services:consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-powered IP PBX: The CudaTel Communication Serverhttp://www.cudatel.com
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
Steven's right. I thought about a very basic use case when writing my message.
Florent
2014-10-22 10:59 GMT+02:00 Steven Ayre <steveayre@gmail.com>:
'if it's the same then there's no transcoding'
Also depending on the applications in use - playback, conference, eavesdrop etc will also require transcoding.
On 21 October 2014 17:52, Florent Krieg <flokrrr@gmail.com> wrote:
Hi Karl,
You can for instance run a 'show channels' in the CLI, find out the two uuids related to both legs of your call and check the codec used for each of them, if it's the same then there's no transcoding (assuming ptime is identical on both sides as well). I'm pretty sure there must be a better way to do it, but I disabled transcoding on my FS profiles so that's what I firstly thought about.
Florent
2014-10-21 14:05 GMT+02:00 kthofer <karl-theo_hofer@inteli-sim.com>:
Hi There
I am looking for a simple way to see if FS is actual transcoding between two channels in our usecase FS is setting up 2 outbound calls and after the A-leg has answered we set up a second outgoing call when answered we bridge the 2 legs. I can not see if FS is transcoding or not with out doing a siptrace on the 2 legs.
--
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-powered IP PBX: The CudaTel Communication Serverhttp://www.cudatel.com
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org