Hello, today I tried the flex client with the mod_rtmp implementation. On a brandnew freeswitch I installed mod_rtmp and copied the flex direrectory to a web server and loaded the web page. However the flex client does not connect: Here's my freeswitch log 2012-08-07 02:32:03.585671 [NOTICE] mod_rtmp.c:744 New RTMP session [f35a192c-0d02-4320-89e9-775a3573ee25] 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:702 Sent handshake response 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:727 Done with handshake 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=3 type=0x14 ts=0 stream_id=0x0] len=342 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:170 [amfnumber=3] Got INVOKE for connect 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x1 stream_id=0x0] len=4 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x5 stream_id=0x0] len=4 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x6 stream_id=0x0] len=5 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x4 stream_id=0x0] len=6 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14 stream_id=0x0] len=201 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14 stream_id=0x0] len=61 2012-08-07 02:32:03.685670 [NOTICE] rtmp_sig.c:121 Sent connect reply 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=2 type=0x5 ts=12247364 stream_id=0x0] len=4 2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:945 Set window size: 131072 bytes If I change the rtmp_url to 'rtmp://conference.freeswitch.org/phone', flex does connect. But in my freeswitch this fails. I have traced the network traffic and I can see that there is information flow between freeswitch and the client on connect request. Somebody has an idea where to look further? -- With kind regards Peter