Good day all. I've recently installed freeswitch in our office and in general everybody is happy. The only disappointing thing - is attended transfer. I've tried to make it working on Cisco7960 and on Grandstream GXP2000 - but with no luck. Could please, anybody respond, who successfully makes attended transfer using bypass mode? In sip profile I use following options: <param name="media-option" value="resume-media-on-hold"/> <param name="media-option" value="bypass-media-after-att-xfer"/> Scenario is the simplest one: A calls B, B transfers to C (with attended transfer - like putting A on hold, making outcall to C, bridging two calls together). What I observe on Cisco phone - is following: 1. A calls B. B answers, puts A on hold and calls C. C answers and talks to B. Up to this time - everything is fine. 2. B presses 'transfer', in order to bridge two calls together. But, instead, C hangs up, A stays on hold and B looks like he just put A on hold. If B right now presses hold button - he will appear in dialog with A again. Did anybody observe such behavior? What could be the advice in such situation? Thank you in advance, Siarhei.