I think it says Invalid Information Element for the DISPLAY smg_prid/a/8122133885!!! correct?? If so, can you please help me to solve this? On Sat, Feb 27, 2010 at 10:32 AM, lakshmanan ganapathy <lakindia89@gmail.com
wrote:
In the Dchan log it is saying Invalid Information Elements. That might be a problem??? But I even don't know why it is saying Invalid Information Element?? Please guide me!!!
On Sat, Feb 27, 2010 at 10:27 AM, lakshmanan ganapathy < lakindia89@gmail.com> wrote:
Dear Moy, Here are the details:
FreeSwitch Log: http://pastebin.freeswitch.org/12256
/var/log/sangoma_pri/dchan_<span-no>.log: http://pastebin.freeswitch.org/12257
/var/log/sangoma_mgd.log: http://pastebin.freeswitch.org/12258
smg_pri.conf http://pastebin.freeswitch.org/12259
On Fri, Feb 26, 2010 at 9:01 PM, Moises Silva <moises.silva@gmail.com>wrote:
Hello lakshmanan,
Please enable the dchan_log=q931 in /etc/wanpipe/smg_pri.conf and then restart it (smg_ctrl restart), then pastebin the logs
/var/log/sangoma_pri/dchan_<span-no>.log /var/log/sangoma_mgd.log
That will contain the Q931 details (if any). Also pastebin your smg_pri.conf.
Also enable the FreeSWITCH debug logging (see the FreeSWITCH wiki for details about that) and paste them too.
-- Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
On Fri, Feb 26, 2010 at 12:55 AM, lakshmanan ganapathy < lakindia89@gmail.com> wrote:
Dear all, I'm having a A102 Sangoma hardware. I configured it with freeswitch. wanrouter status, says both the port as connected. My smg_prid version is
Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: ================System restart============= Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Sangoma PRI Protocol Stack Daemon = Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Version: 1.54 = Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Date: Feb 15 2010 = Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Wanpipe Release: wanpipe-3.5.8.6 = Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: = Revision:Revision: 15288 = Feb 26 16:08:14 FMS-FreeSwitch sangoma_prid: ===========================================
My freeswitch version is 16729. I started freeswitch.
oz list +OK span: 1 (smg_prid) type: Sangoma (boost) chan_count: 60 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options none
I originated a call as originate openzap/smg_prid/a/9952248266 &park(), which hits my mobile.
But when I issued the following command: originate openzap/smg_prid/a/9952248266 &bridge(openzap/smg_prid/a/8122133885) It rings my mobile (9952248266) first, but after that the following error was displayed
2010-02-26 16:20:51.736080 [ERR] switch_ivr_originate.c:2387 Cannot create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION] The call got ended in my mobile.
Freeswitch log and smg_pri.conf http://pastebin.freeswitch.org/12248 openzap.conf: [span wanpipe smg_prid] name => smg_prid trunk_type =>e1 b-channel => 1:1-15 b-channel => 1:17-31 trunk_type =>e1 b-channel => 2:1-15 b-channel => 2:17-31
openzap.conf.xml: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <boost_spans> <span id="smg_prid"> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </boost_spans> </configuration>
Please guide me to setup this one!!.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org