Thanks Anthony for your feedback. Makes sense. It seems to be working fine now with the latest version of Lua. Andrew From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Thursday, 3 December 2015 9:08 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] How to get later versions of Lua to run on FreeSWITCH 1.6.5 running on CentOS 6 or CentOS 7 FS uses the system lib for lua so if you update it yourself you need to install it in the same place as the original one and make sure the pkgconfig is right etc and rerun the whole FS configure process. also setting LD_LIBRARY_PATH=/usr/local/lib before starting FS would do the same as moving the files to the FS lib dir. This is also nonstandard and not the best way to do it. On Wed, Dec 2, 2015 at 1:29 PM, Sergey Safarov <s.safarov@gmail.com<mailto:s.safarov@gmail.com>> wrote: To install latest version of package i recommend port package from fedora repo (for Lua package http://dl.fedoraproject.org/pub/fedora/linux/development/23/source/SRPMS/l/) To make rebuild please use mock utility mock -r epel-6-x86_64 --rebuild ./lua-5.3.0-4.fc23.src.rpm Then install other required dependences to build FS. If required make newest packages version from fedora repo. Instruction how to build most of dependences is located at https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repositary To make FS srpm execute commands git clone -b v1.6 https://freeswitch.org/stash/scm/fs/freeswitch.git mv freeswitch freeswitch-1.7.0 mkdir -p ~/rpmbuild/SOURCES mkdir -p ~/rpmbuild/SPEC tar cjf ~/rpmbuild/SOURCES/freeswitch-1.7.0.tar.bz2 freeswitch-1.7.0 cp freeswitch-1.7.0/freeswitch.spec ~/rpmbuild/SPECS/ cd ~/rpmbuild/SOURCES wget http://ftp.nsysu.edu.tw/FreeBSD/ports/distfiles/freeswitch/libmemcached-0.32... wget http://ftp.nsysu.edu.tw/FreeBSD/ports/distfiles/freeswitch/communicator_semi... wget http://sourceforge.net/projects/cmusphinx/files/sphinxbase/0.8/sphinxbase-0.... wget http://sourceforge.net/projects/cmusphinx/files/pocketsphinx/0.8/pocketsphin... wget https://github.com/mongodb/mongo-c-driver/releases/download/1.1.0/mongo-c-dr... wget http://files.freeswitch.org/downloads/libs/v8-3.24.14.tar.bz2 rpmbuild -bs ~/rpmbuild/SPECS/freeswitch.spec mock -r epel-6-x86_64 --rebuild ~/rpmbuild/SRPMS/freeswitch-1.7.0-1.el7.centos.src.rpm Late will be long process. If error will arise write me directly. Sergey On Wed, Dec 2, 2015 at 12:29 PM, Andrew Keil <andrew.keil@visytel.com<mailto:andrew.keil@visytel.com>> wrote: To all, After much testing I have managed to get Lua 5.3.2 (the latest Lua version, however this will work with all the Lua 5.2.x versions) to run inside FreeSWITCH 1.6.5 on CentOS 6.7 (however the same should work inside CentOS 7). Here is what I have done. Please make any comments and improvements to this procedure. *** One part I am not happy with is that I have to manually copy the liblua.so from /usr/local/lib to /usr/local/freeswitch/lib (see point 22 below). For some reason FreeSWITCH does not find the shared library inside /usr/local/lib. Maybe there is a setting for this I can change as the other option is to put liblua.so inside /usr/lib64 where “yum install lua-devel” puts the liblua.so for Lua version 5.1.4, however I do not like this concept. *** Please note: Currently mod_fsv and mod_vpx (both are relating to FreeSWITCH video features) are not supported inside these instructions, however if you are wanting to move off 1.4.x (since this is going end-of-life in 2016 at some stage) then this could at least be a very good first step, especially if upgrading to Centos 7 is not possible based on your current environment setup. This is based on a fresh installation of CentOS 6.7 (CentOS-6.7-x86_64-bin-DVD1.iso). In my case I ran a default setup selecting Software Development Workstation. Logged in as root user. 1) Make sure yum update is run and CentOS is up-to-date 2) {optional} Inside Terminal window select Edit Profile Preferences and select "Use custom default terminal size" and make it 160 x 60. Close terminal and re-open for the change to take effect. 3) yum -y install epel-release 4) yum -y install git gcc-c++ autoconf automake libtool wget python ncurses-devel zlib-devel libjpeg-devel openssl-devel sqlite-devel libcurl-devel libxml2-devel libidn-devel 4.1) These should be already installed and up-to-date 5) yum -y install e2fsprogs-devel pcre-devel speex-devel ldns-devel libedit-devel libyuv-devel opus-devel libvpx-devel unbound-devel libuuid-devel libsndfile-devel 5.1) These should install successfully 5.2) Originally I also installed lua-devel, so if this has already been installed then remove it by: yum -y remove lua-devel 6) Note: No packages for: libvpx2*, libdb4* (so mod_vpx & mod_fsv will not be supported) 7) Setup Lua 5.3.2 here (obviously you can select your own version): 7.1) cd /usr/local/src 7.2) curl -R -O http://www.lua.org/ftp/lua-5.3.2.tar.gz 7.3) tar zxf lua-5.3.2.tar.gz 7.4) cd /usr/local/src/lua-5.3.2 7.5) vi Makefile Change: TO_LIB= liblua.a To be: TO_LIB= liblua.a liblua.so Save and close (<Esc> :wq!) 7.6) cd /usr/local/src/lua-5.3.2/src 7.7) vi Makefile Change: CFLAGS= -O2 -Wall -Wextra -DLUA_COMPAT_5_2 $(SYSCFLAGS) $(MYCFLAGS) To be: CFLAGS= -O2 -Wall -Wextra -DLUA_COMPAT_5_2 $(SYSCFLAGS) $(MYCFLAGS) -fPIC Add under: LUA_A= liblua.a The line: LUA_SO= liblua.so Change: ALL_T= $(LUA_A) $(LUA_T) $(LUAC_T) To be: ALL_T= $(LUA_A) $(LUA_T) $(LUAC_T) $(LUA_SO) Add under: $(LUAC_T): $(LUAC_O) $(LUA_A) $(CC) -o $@ $(LDFLAGS) $(LUAC_O) $(LUA_A) $(LIBS) The lines: $(LUA_SO): $(CORE_O) $(LIB_O) $(CC) -o $@ -shared $? Save and close (<Esc> :wq!) 7.8) make linux test 7.9) make linux install 8) cd /usr/local/src 9) git clone -b v1.6 https://freeswitch.org/stash/scm/fs/freeswitch.git 10) cd /usr/local/src/freeswitch 11) ./bootstrap.sh 12) vi modules.conf 12.1) comment out (ie. place '#' infront): mod_fsv mod_vpx Save and close (<Esc> :wq!) 13) ./configure 14) make 15) make install 16) make cd-sounds-install 17) make cd-moh-install 18) cd /usr/local/freeswitch/conf 19) vi vars.xml 19.1) change: <X-PRE-PROCESS cmd="set" data="default_password=1234"/> { !! set it to something different !! } Save and close (<Esc> :wq!) 20) cd /usr/local/freeswitch/conf/autoload_configs 21) vi modules.conf.xml 21.1) comment out (ie. place '<!--' infront and '-->' at the end): mod_fsv mod_vpx Save and close (<Esc> :wq!) 22) cp /usr/local/lib/liblua.so /usr/local/freeswitch/lib/. 23) cd /usr/local/freeswitch/bin 24) ./freeswitch -nonat -nonatmap 25) ... to exit from the FreeSWITCH console _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net<http://irc.freenode.net> #freeswitch ☞ http://freeswitch.org/g+ ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org<mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA