Thanks, things look much better: ========== # vi /etc/udev/rules.d/dahdi.rules # /etc/init.d/dahdi restart # ll /dev/dahdi ========== freeswitch@internal> load mod_openzap +OK 2010-05-28 18:15:18.865942 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/modules.conf. freeswitch@internal> 2010-05-28 18:15:18.866962 [NOTICE] zap_io.c:3057 Modules configured: 1 2010-05-28 18:15:18.866962 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/openzap.conf. 2010-05-28 18:15:18.866962 [DEBUG] zap_io.c:2587 found config for span 2010-05-28 18:15:18.866962 [NOTICE] ozmod_zt.c:1185 Using DAHDI control device 2010-05-28 18:15:18.866962 [INFO] zap_io.c:2858 Loading IO from /usr/local/freeswitch/mod/ozmod_zt.so [zt] 2010-05-28 18:15:18.866962 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/zt.conf. 2010-05-28 18:15:18.866962 [INFO] ozmod_zt.c:566 Setting rxgain val to 0.000000 2010-05-28 18:15:18.866962 [INFO] ozmod_zt.c:575 Setting txgain val to 0.000000 2010-05-28 18:15:18.868055 [INFO] zap_io.c:2604 auto-loaded 'zt' 2010-05-28 18:15:18.868055 [DEBUG] zap_io.c:2625 created span 1 (FXO) of type zt 2010-05-28 18:15:18.868055 [DEBUG] zap_io.c:2638 span 1 [name]=[OpenZAP] 2010-05-28 18:15:18.868055 [DEBUG] zap_io.c:2638 span 1 [fxo-channel]=[1] 2010-05-28 18:15:18.868055 [DEBUG] zap_io.c:2667 setting trunk type to 'FXO' start(KEWL) 2010-05-28 18:15:18.868055 [INFO] ozmod_zt.c:385 configuring device /dev/dahdi/channel channel 1 as OpenZAP device 1:1 fd:51 2010-05-28 18:15:18.868055 [INFO] zap_io.c:2782 Configured 1 channel(s) 2010-05-28 18:15:18.869077 [INFO] zap_io.c:2875 Loading SIG from /usr/local/freeswitch/mod/ozmod_analog.so 2010-05-28 18:15:18.869077 [INFO] zap_io.c:2991 auto-loaded 'analog' 2010-05-28 18:15:18.869077 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/tones.conf. 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:551 added tone generation [dial] = [v=-7;%(1000,0,350,440)] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [dial] = [350,440] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:551 added tone generation [ring] = [v=-7;%(2000,4000,440,480)] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [ring] = [440,480] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:551 added tone generation [busy] = [v=-7;%(500,500,480,620)] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [busy] = [480,620] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:551 added tone generation [attn] = [v=0;%(100,100,1400,2060,2450,2600)] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [attn] = [1400,2060,2450,2600] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:551 added tone generation [callwaiting-sas] = [v=0;%(300,0,440)] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [callwaiting-sas] = [440] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:551 added tone generation [callwaiting-cas] = [v=0;%(80,0,2750,2130)] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [callwaiting-cas] = [2750,2130] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [fail1] = [913.8] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [fail2] = [1370.6] 2010-05-28 18:15:18.869077 [DEBUG] zap_io.c:549 added tone detect [fail3] = [1776.7] 2010-05-28 18:15:18.870091 [ERR] mod_openzap.c:2410 Error finding OpenZAP span id: name:PRI_1 2010-05-28 18:15:18.870091 [ERR] mod_openzap.c:2410 Error finding OpenZAP span id: name:PRI_2 2010-05-28 18:15:18.870091 [DEBUG] ozmod_analog.c:946 ANALOG thread starting. 2010-05-28 18:15:18.870091 [CONSOLE] switch_loadable_module.c:900 Successfully Loaded [mod_openzap] 2010-05-28 18:15:18.870091 [NOTICE] switch_loadable_module.c:144 Adding Endpoint 'openzap' 2010-05-28 18:15:18.870091 [NOTICE] switch_loadable_module.c:250 Adding Application 'disable_ec' 2010-05-28 18:15:18.870091 [NOTICE] switch_loadable_module.c:250 Adding Application 'disable_dtmf' 2010-05-28 18:15:18.870091 [NOTICE] switch_loadable_module.c:250 Adding Application 'enable_dtmf' 2010-05-28 18:15:18.870091 [NOTICE] switch_loadable_module.c:272 Adding API Function 'oz' ========== Since I don't have a digital interface, I guess I can remove the PRI_1 and PRI_2 spans from conf/autoload_configs/openzap.conf.xml to avoid the two ERR above. On to configuring Freeswitch to handle incoming calls from the FXO port... Thanks everyone. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Installing-OpenZap-tp5111050p5... Sent from the freeswitch-users mailing list archive at Nabble.com.