Hi all, We are experiencing problems with DTMF collection using FreeSWITCH 1.4.6. The symptoms are missed or duplicated digits when decoding DTMF sent using RFC 2833 from Cisco phones; for example, given the sequence: 1 2 3 4 5 6 7 8 9 0 # we might typically end up with something like this after FreeSWITCH has processed the received RTP: 1 2 3 5 7 7 8 9 9 # Using Wireshark, we can see that all the expected RTP events are present on the wire but FreeSWITCH seems to have difficulty in processing them all consistently. I've tried setting the following manual RTP bugs (bit of guesswork here I'm afraid, these may or may not be relevant): IGNORE_DTMF_DURATION ACCEPT_ANY_PACKETS but unfortunately neither made any difference. Are there any other settings we could try which might help? Or is this a known problem with some other workaround? Regards, Chris Chris Young Software Engineer [cid:image05853e.PNG@376d53fe.46b309f7] t: +44 118 943 9249 e: Chris.Young@enghouse.com<mailto:Chris.Young@enghouse.com> w: www.enghouseinteractive.co.uk<http://www.enghouseinteractive.co.uk> [cid:image3d627d.PNG@c805b5df.4cb095da]
