Hi, and thanks in advance for your help. I run freeswitch with a SangomA A102 (FXO/FXS) card. The freeswitch code base that it is running on is about 3 months old. It is a production server, and taking it down other than in the middle of the night is problemsome... It is running on Debian Lenny. In the next couple of days I am going to be spending the night, doing a fresh install of the latest debian (squeeze) at which time I will do a fresh GIT, fresh sangoma wanpipe and be totally current on FreeSwitch. My Question: I am having intermittent problems with my FXO/FXS ports. Basically I have fax machines attached. Every so often (sometimes 5-10 days in between), the fax machine says that it has no dial tone. I am able to resolve the problem by going to the CLI and unloading mod_freetdm and then reloading mod_freetdm. When the "no dialtone problem" is happening, unloading mod_freetdm takes 10 seconds or so...I have even had it crash freeswitch during the unload... I haven't attempted to narrow down the issue yet, and thought I might ask for some guidance before heading down that path. One of my thoughts is that perhaps the Hardware is bad, but the fact that unloading/loading mod_freetdm fixes it makes me think it is something in mod_freetdm... Your thoughts? -Frank