Great thanks ... i look forward to your results. I installed on a deb ARI -----Original Message----- From: "Brian West" <brian@freeswitch.org> Sent: Friday, September 5, 2008 10:23pm To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] SIP, NAT and Amazon EC2 Let me launch mine in 32bit and see what I can do over the weekend... I had this working without a problem. ;/ /b On Sep 6, 2008, at 12:09 AM, Damon Brown wrote:
Ive Tried the following with no success:
internal.xml
<param name="ext-rtp-ip" value="75.101.142.208"/> <param name="ext-sip-ip" value="75.101.142.208"/>
Ive also tried just changing the vars.xml file. I also tried forwarding the incoming rtp connections to my test pc. all with no audio success. I am sure im doing something wrong I jsut cant find it.
I found another suggestion on the wiki of creating a "double nat" that listens on 5090. That didnt change anything either, here is that information:
<settings> <param name="debug" value="0"/> <param name="sip-trace" value="no"/> <param name="rfc2833-pt" value="101"/> <param name="sip-port" value="5090"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="dtmf-duration" value="100"/> <param name="codec-prefs" value="$${outbound_codec_prefs}"/> <param name="hold-music" value="$${hold_music}"/> <param name="use-rtp-timer" value="true"/> <param name="rtp-timer-name" value="soft"/> <param name="manage-presence" value="false"/> <param name="aggressive-nat-detection" value="true"/> <param name="inbound-codec-negotiation" value="generous"/> <param name="nonce-ttl" value="60"/> <param name="auth-calls" value="false"/> <param name="rtp-timeout-sec" value="1800"/> <param name="rtp-ip" value="$${local_ip_v4}"/> <param name="sip-ip" value="$${local_ip_v4}"/> <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="ext-sip-ip" value="$${external_sip_ip}"/> <param name="rtp-timeout-sec" value="300"/> <!--<param name="enable-3pcc" value="true"/>--> <!-- TLS: disabled by default, set to "true" to enable --> <param name="tls" value="false"/> <!-- additional bind parameters for TLS --> <param name="tls-bind-params" value="transport=tls"/> <!-- Port to listen on for TLS requests. (5061 will be used if unspecified)$ <param name="tls-sip-port" value="5081"/> <!-- Location of the agent.pem and cafile.pem ssl certificates (needed for $ <param name="tls-cert-dir" value="$${base_dir}/conf/ssl"/> <!-- TLS version ("sslv23" (default), "tlsv1"). NOTE: Phones may not work w$ <param name="tls-version" value="tlsv1"/>
</settings>
Maybe someone can see what is going on here.
Thanks, Damon
-----Original Message----- From: "Brian West" <brian@freeswitch.org> Sent: Friday, September 5, 2008 6:57pm To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] SIP, NAT and Amazon EC2
You'll have to set an ext-sip-ip and ext-rtp-ip on the internal.xml profile on ec2 duplicate them from the external profile.
/b
On Sep 5, 2008, at 8:47 PM, Damon Brown wrote:
Yes, I have all of the valid posts open on my security group -d
Brian West sip:brian@freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Brian West sip:brian@freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org