Hi, I'm tearing my hair out trying to get an inbound FXO call to bridge to a SIP extension. My setup is: Zapmicro ZMA400P (TDM400P equivalent). Cisco 7940 with SIP firmware FS 1.0.1 + zaptel 1.4.11 I'm able to make calls out from various SIP extensions via the ZMA400P FXO, however I can't get inbound calls to cause the SIP extension to ring and acknowledge the call. In variations of the dialplan I can get a delay_echo to work for the inbound call; The sample config for Local Extension will appear to transfer the call to the extension, but the extension doesn't ring; however after 30 seconds, the call diverts to voicemail successfully. I've tried transfers, bridging; default and public profiles with no success. I've been through the wiki. Does anyone have a sample dialplan, or the tricks to get FXO-to-extensions to work? thanks in advance, Ian. -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com