Hi there, I have question about group_confirm and I am hoping someone can help: I am bridging a call and prompting the called party to press 1 to answer. Works great: <action application="answer"/> <action application="set" data="group_confirm_file=phrase:ppn_to_accept_call_from"/> <action application="set" data="group_confirm_key=1"/> <action application="bridge" data="{leg_timeout=10}user2/1001 <action application="say" data="en number pronounced 54321"/> You will notice that leg_timeout is 10 (set low to test). So that gives the caller just a couple of seconds to answer. So I add: * <action application="set" data="group_confirm_cancel_timeout=true"/>* This cancels that leg_timeout - the call now will stay up until the called party presses 1 or either party hangs up. If a call goes to a cell phone voicemail - this can result in a long message of repeated "press 1 to accept call". And I cannot move the calling party on to the next dialplan action. I tried originate_timeout and call_timeout and all seemed to be cancelled by group_confirm_cancel_timeout, as you might expect. Is there a way to set a timeout in that group_confirm stage? For example a *group_confirm_timeout *setting. That would set the seconds the called party has to confirm? Thanks in anticipation. Phil