Author: cypromis Date: Sat Dec 1 13:35:51 2007 New Revision: 6461 Modified: freeswitch/trunk/build/freeswitch.init.suse Log: Cleaning leftovers from peters init file mistakes hehe Modified: freeswitch/trunk/build/freeswitch.init.suse ============================================================================== --- freeswitch/trunk/build/freeswitch.init.suse (original) +++ freeswitch/trunk/build/freeswitch.init.suse Sat Dec 1 13:35:51 2007 @@ -42,84 +42,13 @@ # Default-Start: 3 5 # Default-Stop: 0 1 2 6 # Short-Description: FREESWITCH XYZ daemon providing ZYX -# Description: Start FREESWITCH to allow XY and provide YZ -# continued on second line by '#<TAB>' -# should contain enough info for the runlevel editor -# to give admin some idea what this service does and -# what it's needed for ... -# (The Short-Description should already be a good hint.) +# Description: Start FREESWITCH the Open Source +# Voice Platform ### END INIT INFO # -# Any extensions to the keywords given above should be preceeded by -# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB. -# -# Notes on Required-Start/Should-Start: -# * There are two different issues that are solved by Required-Start -# and Should-Start -# (a) Hard dependencies: This is used by the runlevel editor to determine -# which services absolutely need to be started to make the start of -# this service make sense. Example: nfsserver should have -# Required-Start: $portmap -# Also, required services are started before the dependent ones. -# The runlevel editor will warn about such missing hard dependencies -# and suggest enabling. During system startup, you may expect an error, -# if the dependency is not fulfilled. -# (b) Specifying the init script ordering, not real (hard) dependencies. -# This is needed by insserv to determine which service should be -# started first (and at a later stage what services can be started -# in parallel). The tag Should-Start: is used for this. -# It tells, that if a service is available, it should be started -# before. If not, never mind. -# * When specifying hard dependencies or ordering requirements, you can -# use names of services (contents of their Provides: section) -# or pseudo names starting with a $. The following ones are available -# according to LSB (1.1): -# $local_fs all local file systems are mounted -# (most services should need this!) -# $remote_fs all remote file systems are mounted -# (note that /usr may be remote, so -# many services should Require this!) -# $syslog system logging facility up -# $network low level networking (eth card, ...) -# $named hostname resolution available -# $netdaemons all network daemons are running -# The $netdaemons pseudo service has been removed in LSB 1.2. -# For now, we still offer it for backward compatibility. -# These are new (LSB 1.2): -# $time the system time has been set correctly -# $portmap SunRPC portmapping service available -# UnitedLinux extensions: -# $ALL indicates that a script should be inserted -# at the end -# * The services specified in the stop tags -# (Required-Stop/Should-Stop) -# specify which services need to be still running when this service -# is shut down. Often the entries there are just copies or a subset -# from the respective start tag. -# * Should-Start/Stop are now part of LSB as of 2.0, -# formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop. -# insserv does support both variants. -# * X-UnitedLinux-Default-Enabled: yes/no is used at installation time -# (%fillup_and_insserv macro in %post of many RPMs) to specify whether -# a startup script should default to be enabled after installation. -# It's not used by insserv. -# -# Note on runlevels: -# 0 - halt/poweroff 6 - reboot -# 1 - single user 2 - multiuser without network exported -# 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm) -# -# Note on script names: -# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html -# A registry has been set up to manage the init script namespace. -# http://www.lanana.org/ -# Please use the names already registered or register one or use a -# vendor prefix. - - # Check for missing binaries (stale symlinks should not happen) # Note: Special treatment of stop for LSB conformance -FREESWITCH_BIN=/usr/bin/freeswitch +FREESWITCH_BIN=/opt/freeswitch/bin/freeswitch test -x $FREESWITCH_BIN || { echo "$FREESWITCH_BIN not installed"; if [ "$1" = "stop" ]; then exit 0; else exit 5; fi; }