Author: anthm Date: Wed Feb 4 18:05:55 2009 New Revision: 11646 Log: add iks-reconf target Modified: freeswitch/trunk/Makefile.am freeswitch/trunk/libs/iksemel/INSTALL freeswitch/trunk/libs/iksemel/ltmain.sh Modified: freeswitch/trunk/Makefile.am ============================================================================== --- freeswitch/trunk/Makefile.am (original) +++ freeswitch/trunk/Makefile.am Wed Feb 4 18:05:55 2009 @@ -376,6 +376,12 @@ cd libs/openzap && sh ./configure.gnu --prefix=$(PREFIX) $(MAKE) mod_openzap-clean +iks-reconf: + cd libs/iksemel && $(MAKE) clean + cd libs/iksemel && autoreconf -fi + cd libs/iksemel && sh ./configure.gnu --prefix=$(PREFIX) + $(MAKE) mod_dingaling-clean + sofia-reconf: cd libs/sofia-sip && sh ./autogen.sh cd libs/sofia-sip && $(MAKE) clean Modified: freeswitch/trunk/libs/iksemel/INSTALL ============================================================================== --- freeswitch/trunk/libs/iksemel/INSTALL (original) +++ freeswitch/trunk/libs/iksemel/INSTALL Wed Feb 4 18:05:55 2009 @@ -1,27 +1,43 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + Basic Installation ================== - These are generic installation instructions. +These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. The simplest way to compile this package is: @@ -54,20 +70,22 @@ Compilers and Options ===================== - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== - You can compile the package for more than one kind of computer at the +You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the @@ -75,28 +93,28 @@ the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. Installation Names ================== - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. +By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular +options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. @@ -107,7 +125,7 @@ Optional Features ================= - Some packages pay attention to `--enable-FEATURE' options to +Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -122,48 +140,86 @@ Specifying the System Type ========================== - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + CPU-COMPANY-SYSTEM -See the file `config.sub' for the possible values of each field. If +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't -need to know the host type. +need to know the machine type. - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. Sharing Defaults ================ - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. -Operation Controls +Defining Variables ================== - `configure' recognizes the following options to control how it -operates. +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). Here is a another example: + + /bin/bash ./configure CONFIG_SHELL=/bin/bash + +Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent +configuration-related scripts to be executed by `/bin/bash'. + +`configure' Invocation +====================== + +`configure' recognizes the following options to control how it operates. `--help' +`-h' Print a summary of the options to `configure', and exit. +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + `--quiet' `--silent' `-q' @@ -175,8 +231,6 @@ Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. -`configure' also accepts some other, not widely useful, options. Modified: freeswitch/trunk/libs/iksemel/ltmain.sh ============================================================================== --- freeswitch/trunk/libs/iksemel/ltmain.sh (original) +++ freeswitch/trunk/libs/iksemel/ltmain.sh Wed Feb 4 18:05:55 2009 @@ -33,9 +33,6 @@ # function. progpath="$0" -# define SED for historic ltconfig's generated by Libtool 1.3 -test -z "$SED" && SED=sed - # The name of this program: progname=`echo "$progpath" | $SED $basename` modename="$progname" @@ -49,17 +46,16 @@ VERSION=1.5.22 TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes. -if test -n "${ZSH_VERSION+set}" ; then +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST -fi -# Same for EGREP, and just to be sure, do LTCC as well -if test "X$EGREP" = X ; then - EGREP=egrep -fi -if test "X$LTCC" = X ; then - LTCC=${CC-gcc} +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi # Check that we have a working $echo. @@ -115,12 +111,14 @@ # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). # We save the old values to restore during execute mode. -if test "${LC_ALL+set}" = set; then - save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -fi -if test "${LANG+set}" = set; then - save_LANG="$LANG"; LANG=C; export LANG -fi +for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + fi" +done # Make sure IFS has a sensible default lt_nl=' @@ -146,30 +144,8 @@ preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" - -if test -z "$max_cmd_len"; then - i=0 - testring="ABCD" - new_result= - - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - max_cmd_len="$new_result" && - test "$i" != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring="$testring$testring" - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - max_cmd_len=`expr $max_cmd_len \/ 2` -fi +extracted_archives= +extracted_serial=0 ##################################### # Shell function definitions: @@ -291,17 +267,7 @@ esac CC_quoted="$CC_quoted $arg" done - # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc' - trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"` - # and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc - extendcc=${host}-${CC} case "$@ " in - "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\ - "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*) - tagname=CC - break ;; - "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\ - "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. @@ -371,7 +337,17 @@ *) my_xabs=`pwd`"/$my_xlib" ;; esac my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xdir="$my_gentop/$my_xlib" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + extracted_serial=`expr $extracted_serial + 1` + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" $show "${rm}r $my_xdir" $run ${rm}r "$my_xdir" @@ -802,6 +778,7 @@ *.f90) xform=f90 ;; *.for) xform=for ;; *.java) xform=java ;; + *.obj) xform=obj ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` @@ -895,7 +872,7 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$srcfile" "$lockfile" 2>/dev/null; do + until $run ln "$progpath" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done @@ -1182,8 +1159,9 @@ for arg do case $arg in - -all-static | -static) - if test "X$arg" = "X-all-static"; then + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 fi @@ -1191,12 +1169,20 @@ dlopen_self=$dlopen_self_static fi prefer_static_libs=yes - else + ;; + -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built - fi + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac build_libtool_libs=no build_old_libs=yes break @@ -1756,7 +1742,7 @@ continue ;; - -static) + -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects @@ -2534,7 +2520,9 @@ if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. @@ -3230,7 +3218,7 @@ # which has an extra 1 added just for fun # case $version_type in - darwin|linux|osf|windows) + darwin|linux|osf|windows|none) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" @@ -3454,11 +3442,11 @@ fi # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` - deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` - dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` - done +# for path in $notinst_path; do +# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` +# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` +# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` +# done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. @@ -3559,13 +3547,12 @@ int main() { return 0; } EOF $rm conftest - $LTCC $LTCFLAGS -o conftest conftest.c $deplibs - if test "$?" -eq 0 ; then + if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ldd_output=`ldd conftest` for i in $deplibs; do name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" -ne "0"; then + if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) @@ -3604,9 +3591,7 @@ # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then $rm conftest - $LTCC $LTCFLAGS -o conftest conftest.c $i - # Did it work? - if test "$?" -eq 0 ; then + if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in @@ -3638,7 +3623,7 @@ droppeddeps=yes $echo $echo "*** Warning! Library $i is needed by this library but I was not able to" - $echo "*** make it link in! You will probably need to install it or some" + $echo "*** make it link in! You will probably need to install it or some" $echo "*** library that it depends on before this library will be fully" $echo "*** functional. Installing it before continuing would be even better." fi @@ -3686,13 +3671,6 @@ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done - # It is ok to link against an archive when - # building a shared library. - if $AR -t $potlib > /dev/null 2>&1; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$file_magic_regex" > /dev/null; then @@ -4290,12 +4268,14 @@ reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" @@ -4743,16 +4723,16 @@ case $host in *cygwin* | *mingw* ) if test -f "$output_objdir/${outputname}.def" ; then - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` else - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` fi ;; * ) - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ;; esac ;; @@ -4767,13 +4747,13 @@ # really was required. # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. @@ -4860,7 +4840,7 @@ if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` else # fast_install is set to needless relink_command= @@ -4897,7 +4877,7 @@ fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` fi # Quote $echo for shipping. @@ -5304,6 +5284,18 @@ Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi + # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH @@ -5430,11 +5422,6 @@ $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. - - # Make sure env LD_LIBRARY_PATH does not mess us up - if test -n \"\${LD_LIBRARY_PATH+set}\"; then - export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH - fi " case $host in # Backslashes separate directories on plain windows @@ -5451,7 +5438,7 @@ ;; esac $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + \$echo \"\$0: cannot exec \$program \$*\" exit $EXIT_FAILURE fi else @@ -5637,7 +5624,7 @@ done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` if test "$hardcode_automatic" = yes ; then relink_command= fi @@ -5662,48 +5649,9 @@ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi - if test "X$EGREP" = X ; then - EGREP=egrep - fi - # We do not want PiSi's install root ($INSTALL_ROOT) present. Check only for - # this if the .la is being installed. - if test "$installed" = yes && test "$INSTALL_ROOT"; then - eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$INSTALL_ROOT:/:g" -e 's:/\+:/:g'` - else - mynewdependency_lib="$libdir/$name" - fi - # Do not add duplicates - if test "$mynewdependency_lib"; then - my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` - if test -z "$my_little_ninja_foo_1"; then - newdependency_libs="$newdependency_libs $mynewdependency_lib" - fi - fi - ;; - *) - if test "$installed" = yes; then - # We do not want PiSi's build root ($WORK_DIR) present. - my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$WORK_DIR"` - # We do not want PiSi's install root ($INSTALL_ROOT) present. - my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$INSTALL_ROOT"` - if test -n "$my_little_ninja_foo_2" && test "$WORK_DIR"; then - mynewdependency_lib="" - elif test -n "$my_little_ninja_foo_3" && test "$INSTALL_DIR"; then - eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$INSTALL_DIR:/:g" -e 's:/\+:/:g'` - else - mynewdependency_lib="$deplib" - fi - else - mynewdependency_lib="$deplib" - fi - # Do not add duplicates - if test "$mynewdependency_lib"; then - my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` - if test -z "$my_little_ninja_foo_4"; then - newdependency_libs="$newdependency_libs $mynewdependency_lib" - fi - fi + newdependency_libs="$newdependency_libs $libdir/$name" ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" @@ -5755,10 +5703,6 @@ case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac - # Do not add duplicates - if test "$installed" = yes && test "$INSTALL_DIR"; then - install_libdir=`echo "$install_libdir" |sed -e "s:$INSTALL_DIR:/:g" -e 's:/\+:/:g'` - fi $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP @@ -6025,9 +5969,9 @@ if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` else - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` fi $echo "$modename: warning: relinking \`$file'" 1>&2 @@ -6236,7 +6180,7 @@ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` $show "$relink_command" if $run eval "$relink_command"; then : @@ -6512,12 +6456,15 @@ fi # Restore saved environment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi + for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + # Now prepare to actually exec the command. exec_cmd="\$cmd$args" @@ -6874,9 +6821,9 @@ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE + try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX - try to export only the symbols matching REGEX + try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened @@ -6890,9 +6837,11 @@ -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] + specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored.