Author: brian Date: Thu Jan 15 17:29:18 2009 New Revision: 11241 Log: enable these options to make the default more user friendly when it comes to domains Modified: freeswitch/trunk/conf/sip_profiles/internal.xml Modified: freeswitch/trunk/conf/sip_profiles/internal.xml ============================================================================== --- freeswitch/trunk/conf/sip_profiles/internal.xml (original) +++ freeswitch/trunk/conf/sip_profiles/internal.xml Thu Jan 15 17:29:18 2009 @@ -52,7 +52,7 @@ <!-- ip address to bind to, DO NOT USE HOSTNAMES ONLY IP ADDRESSES --> <param name="sip-ip" value="$${local_ip_v4}"/> <param name="hold-music" value="$${hold_music}"/> - <!--<param name="apply-nat-acl" value="rfc1918"/>--> + <param name="apply-nat-acl" value="rfc1918"/> <!--<param name="aggressive-nat-detection" value="true"/>--> <!--<param name="enable-timer" value="false"/>--> <!--<param name="enable-100rel" value="true"/>--> @@ -144,10 +144,15 @@ <!-- <param name="vad" value="out"/> --> <!-- <param name="vad" value="both"/> --> <!--<param name="alias" value="sip:10.0.1.251:5555"/>--> + <!-- + These are enabled to make the default config work better out of the box. + If you need more than ONE domain you'll need to not use these options. + + --> <!--all inbound reg will look in this domain for the users --> - <!--<param name="force-register-domain" value="$${domain}"/>--> + <param name="force-register-domain" value="$${domain}"/> <!--all inbound reg will stored in the db using this domain --> - <!--<param name="force-register-db-domain" value="$${domain}"/>--> + <param name="force-register-db-domain" value="$${domain}"/> <!--force suscription expires to a lower value than requested--> <!--<param name="force-subscription-expires" value="60"/>--> <!-- disable register and transfer which may be undesirable in a public switch -->