[Freeswitch-svn] [commit] r13729 - in freeswitch/trunk/libs: pcre win32/pcre

Author: mikej Date: Tue Jun 9 12:35:48 2009 New Revision: 13729 Log: fix msvc pcre build for pcre 7.9 Modified: freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c freeswitch/trunk/libs/win32/pcre/config.h freeswitch/trunk/libs/win32/pcre/dftables.c freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj freeswitch/trunk/libs/win32/pcre/libpcre.vcproj freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj Modified: freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c ============================================================================== --- freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c (original) +++ freeswitch/trunk/libs/pcre/pcre_ucp_searchfuncs.c Tue Jun 9 12:35:48 2009 @@ -41,6 +41,10 @@ /* This module contains code for searching the table of Unicode character properties. */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + #include "pcre_internal.h" #include "ucp.h" /* Category definitions */ Modified: freeswitch/trunk/libs/win32/pcre/config.h ============================================================================== --- freeswitch/trunk/libs/win32/pcre/config.h (original) +++ freeswitch/trunk/libs/win32/pcre/config.h Tue Jun 9 12:35:48 2009 @@ -1,159 +1,313 @@ +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.ac by autoheader. */ -/* On Unix-like systems config.in is converted by "configure" into config.h. + +/* On Unix-like systems config.h.in is converted by "configure" into config.h. Some other environments also support the use of "configure". PCRE is written in Standard C, but there are a few non-standard things it can cope with, allowing it to run on SunOS4 and other "close to standard" systems. -On a non-Unix-like system you should just copy this file into config.h, and set -up the macros the way you need them. You should normally change the definitions -of HAVE_STRERROR and HAVE_MEMMOVE to 1. Unfortunately, because of the way -autoconf works, these cannot be made the defaults. If your system has bcopy() -and not memmove(), change the definition of HAVE_BCOPY instead of HAVE_MEMMOVE. -If your system has neither bcopy() nor memmove(), leave them both as 0; an -emulation function will be used. */ +If you are going to build PCRE "by hand" on a system without "configure" you +should copy the distributed config.h.generic to config.h, and then set up the +macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to +all of your compile commands, so that config.h is included at the start of +every source. + +Alternatively, you can avoid editing by using -D on the compiler command line +to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. + +PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if +HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set +them both to 0; an emulation function will be used. */ + +/* By default, the \R escape sequence matches any Unicode line ending + character or sequence of characters. If BSR_ANYCRLF is defined, this is + changed so that backslash-R matches only CR, LF, or CRLF. The build- time + default can be overridden by the user of PCRE at runtime. On systems that + support it, "configure" can be used to override the default. */ +/* #undef BSR_ANYCRLF */ /* If you are compiling for a system that uses EBCDIC instead of ASCII -character codes, define this macro as 1. On systems that can use "configure", -this can be done via --enable-ebcdic. */ + character codes, define this macro as 1. On systems that can use + "configure", this can be done via --enable-ebcdic. PCRE will then assume + that all input strings are in EBCDIC. If you do not define this macro, PCRE + will assume input strings are ASCII or UTF-8 Unicode. It is not possible to + build a version of PCRE that supports both EBCDIC and UTF-8. */ +/* #undef EBCDIC */ -#ifndef EBCDIC -#define EBCDIC 0 +/* Define to 1 if you have the `bcopy' function. */ +#ifndef HAVE_BCOPY +#define HAVE_BCOPY 1 #endif -/* If you are compiling for a system other than a Unix-like system or Win32, -and it needs some magic to be inserted before the definition of a function that -is exported by the library, define this macro to contain the relevant magic. If -you do not define this macro, it defaults to "extern" for a C compiler and -"extern C" for a C++ compiler on non-Win32 systems. This macro apears at the -start of every exported function that is part of the external API. It does not -appear on functions that are "external" in the C sense, but which are internal -to the library. */ +/* Define to 1 if you have the <bits/type_traits.h> header file. */ +/* #undef HAVE_BITS_TYPE_TRAITS_H */ -/* #define PCRE_DATA_SCOPE */ +/* Define to 1 if you have the <bzlib.h> header file. */ +#ifndef HAVE_BZLIB_H +#define HAVE_BZLIB_H 1 +#endif -/* Define the following macro to empty if the "const" keyword does not work. */ +/* Define to 1 if you have the <dirent.h> header file. */ +#ifndef HAVE_DIRENT_H +#define HAVE_DIRENT_H 1 +#endif -/* #undef const */ +/* Define to 1 if you have the <dlfcn.h> header file. */ +#ifndef HAVE_DLFCN_H +#define HAVE_DLFCN_H 1 +#endif -/* Define the following macro to "unsigned" if <stddef.h> does not define -size_t. */ +/* Define to 1 if you have the <inttypes.h> header file. */ +#ifndef HAVE_INTTYPES_H +#define HAVE_INTTYPES_H 1 +#endif -/* #undef size_t */ +/* Define to 1 if you have the <limits.h> header file. */ +#ifndef HAVE_LIMITS_H +#define HAVE_LIMITS_H 1 +#endif -/* The following two definitions are mainly for the benefit of SunOS4, which -does not have the strerror() or memmove() functions that should be present in -all Standard C libraries. The macros HAVE_STRERROR and HAVE_MEMMOVE should -normally be defined with the value 1 for other systems, but unfortunately we -cannot make this the default because "configure" files generated by autoconf -will only change 0 to 1; they won't change 1 to 0 if the functions are not -found. */ +/* Define to 1 if the system has the type `long long'. */ +#ifndef HAVE_LONG_LONG +#define HAVE_LONG_LONG 1 +#endif -#define HAVE_STRERROR 1 +/* Define to 1 if you have the `memmove' function. */ +#ifndef HAVE_MEMMOVE #define HAVE_MEMMOVE 1 -#define HAVE_WIN32API 1 +#endif -/* There are some non-Unix-like systems that don't even have bcopy(). If this -macro is false, an emulation is used. If HAVE_MEMMOVE is set to 1, the value of -HAVE_BCOPY is not relevant. */ +/* Define to 1 if you have the <memory.h> header file. */ +#ifndef HAVE_MEMORY_H +#define HAVE_MEMORY_H 1 +#endif -#define HAVE_BCOPY 1 +/* Define to 1 if you have the <readline/history.h> header file. */ +#ifndef HAVE_READLINE_HISTORY_H +#define HAVE_READLINE_HISTORY_H 1 +#endif -/* The value of NEWLINE determines the newline character. The default is to -leave it up to the compiler, but some sites want to force a particular value. -On Unix-like systems, "configure" can be used to override this default. */ +/* Define to 1 if you have the <readline/readline.h> header file. */ +#ifndef HAVE_READLINE_READLINE_H +#define HAVE_READLINE_READLINE_H 1 +#endif -#ifndef NEWLINE -#define NEWLINE '\n' +/* Define to 1 if you have the <stdint.h> header file. */ +#ifndef HAVE_STDINT_H +#define HAVE_STDINT_H 1 #endif -/* The value of LINK_SIZE determines the number of bytes used to store links as -offsets within the compiled regex. The default is 2, which allows for compiled -patterns up to 64K long. This covers the vast majority of cases. However, PCRE -can also be compiled to use 3 or 4 bytes instead. This allows for longer -patterns in extreme cases. On systems that support it, "configure" can be used -to override this default. */ +/* Define to 1 if you have the <stdlib.h> header file. */ +#ifndef HAVE_STDLIB_H +#define HAVE_STDLIB_H 1 +#endif -#ifndef LINK_SIZE -#define LINK_SIZE 2 +/* Define to 1 if you have the `strerror' function. */ +#ifndef HAVE_STRERROR +#define HAVE_STRERROR 1 #endif -/* When calling PCRE via the POSIX interface, additional working storage is -required for holding the pointers to capturing substrings because PCRE requires -three integers per substring, whereas the POSIX interface provides only two. If -the number of expected substrings is small, the wrapper function uses space on -the stack, because this is faster than using malloc() for each call. The -threshold above which the stack is no longer used is defined by POSIX_MALLOC_ -THRESHOLD. On systems that support it, "configure" can be used to override this -default. */ +/* Define to 1 if you have the <string> header file. */ +#ifndef HAVE_STRING +#define HAVE_STRING 1 +#endif -#ifndef POSIX_MALLOC_THRESHOLD -#define POSIX_MALLOC_THRESHOLD 10 +/* Define to 1 if you have the <strings.h> header file. */ +#ifndef HAVE_STRINGS_H +#define HAVE_STRINGS_H 1 #endif -/* PCRE uses recursive function calls to handle backtracking while matching. -This can sometimes be a problem on systems that have stacks of limited size. -Define NO_RECURSE to get a version that doesn't use recursion in the match() -function; instead it creates its own stack by steam using pcre_recurse_malloc() -to obtain memory from the heap. For more detail, see the comments and other -stuff just above the match() function. On systems that support it, "configure" -can be used to set this in the Makefile (use --disable-stack-for-recursion). */ - -/* #define NO_RECURSE */ - -/* The value of MATCH_LIMIT determines the default number of times the internal -match() function can be called during a single execution of pcre_exec(). There -is a runtime interface for setting a different limit. The limit exists in order -to catch runaway regular expressions that take for ever to determine that they -do not match. The default is set very large so that it does not accidentally -catch legitimate cases. On systems that support it, "configure" can be used to -override this default default. */ +/* Define to 1 if you have the <string.h> header file. */ +#ifndef HAVE_STRING_H +#define HAVE_STRING_H 1 +#endif + +/* Define to 1 if you have the `strtoll' function. */ +/* #undef HAVE_STRTOLL */ + +/* Define to 1 if you have the `strtoq' function. */ +#ifndef HAVE_STRTOQ +#define HAVE_STRTOQ 1 +#endif + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#ifndef HAVE_SYS_STAT_H +#define HAVE_SYS_STAT_H 1 +#endif + +/* Define to 1 if you have the <sys/types.h> header file. */ +#ifndef HAVE_SYS_TYPES_H +#define HAVE_SYS_TYPES_H 1 +#endif +/* Define to 1 if you have the <type_traits.h> header file. */ +/* #undef HAVE_TYPE_TRAITS_H */ + +/* Define to 1 if you have the <unistd.h> header file. */ +#ifndef HAVE_UNISTD_H +#define HAVE_UNISTD_H 1 +#endif + +/* Define to 1 if the system has the type `unsigned long long'. */ +#ifndef HAVE_UNSIGNED_LONG_LONG +#define HAVE_UNSIGNED_LONG_LONG 1 +#endif + +/* Define to 1 if you have the <windows.h> header file. */ +#define HAVE_WINDOWS_H 1 + +/* Define to 1 if you have the <zlib.h> header file. */ +#ifndef HAVE_ZLIB_H +#define HAVE_ZLIB_H 1 +#endif + +/* Define to 1 if you have the `_strtoi64' function. */ +/* #undef HAVE__STRTOI64 */ + +/* The value of LINK_SIZE determines the number of bytes used to store links + as offsets within the compiled regex. The default is 2, which allows for + compiled patterns up to 64K long. This covers the vast majority of cases. + However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows + for longer patterns in extreme cases. On systems that support it, + "configure" can be used to override this default. */ +#ifndef LINK_SIZE +#define LINK_SIZE 2 +#endif + +/* The value of MATCH_LIMIT determines the default number of times the + internal match() function can be called during a single execution of + pcre_exec(). There is a runtime interface for setting a different limit. + The limit exists in order to catch runaway regular expressions that take + for ever to determine that they do not match. The default is set very large + so that it does not accidentally catch legitimate cases. On systems that + support it, "configure" can be used to override this default default. */ #ifndef MATCH_LIMIT #define MATCH_LIMIT 10000000 #endif /* The above limit applies to all calls of match(), whether or not they -increase the recursion depth. In some environments it is desirable to limit the -depth of recursive calls of match() more strictly, in order to restrict the -maximum amount of stack (or heap, if NO_RECURSE is defined) that is used. The -value of MATCH_LIMIT_RECURSION applies only to recursive calls of match(). To -have any useful effect, it must be less than the value of MATCH_LIMIT. There is -a runtime method for setting a different limit. On systems that support it, -"configure" can be used to override this default default. */ - + increase the recursion depth. In some environments it is desirable to limit + the depth of recursive calls of match() more strictly, in order to restrict + the maximum amount of stack (or heap, if NO_RECURSE is defined) that is + used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of + match(). To have any useful effect, it must be less than the value of + MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is + a runtime method for setting a different limit. On systems that support it, + "configure" can be used to override the default. */ #ifndef MATCH_LIMIT_RECURSION #define MATCH_LIMIT_RECURSION MATCH_LIMIT #endif -/* These three limits are parameterized just in case anybody ever wants to -change them. Care must be taken if they are increased, because they guard -against integer overflow caused by enormously large patterns. */ +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_COUNT +#define MAX_NAME_COUNT 10000 +#endif +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ #ifndef MAX_NAME_SIZE #define MAX_NAME_SIZE 32 #endif -#ifndef MAX_NAME_COUNT -#define MAX_NAME_COUNT 10000 +/* The value of NEWLINE determines the newline character sequence. On systems + that support it, "configure" can be used to override the default, which is + 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2 + (ANYCRLF). */ +#ifndef NEWLINE +#define NEWLINE 10 #endif -#ifndef MAX_DUPLENGTH -#define MAX_DUPLENGTH 30000 -#endif +/* PCRE uses recursive function calls to handle backtracking while matching. + This can sometimes be a problem on systems that have stacks of limited + size. Define NO_RECURSE to get a version that doesn't use recursion in the + match() function; instead it creates its own stack by steam using + pcre_recurse_malloc() to obtain memory from the heap. For more detail, see + the comments and other stuff just above the match() function. On systems + that support it, "configure" can be used to set this in the Makefile (use + --disable-stack-for-recursion). */ +/* #undef NO_RECURSE */ + +/* Name of package */ +#define PACKAGE "pcre" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "PCRE" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "PCRE 7.9" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "pcre" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "7.9" + + +/* If you are compiling for a system other than a Unix-like system or + Win32, and it needs some magic to be inserted before the definition + of a function that is exported by the library, define this macro to + contain the relevant magic. If you do not define this macro, it + defaults to "extern" for a C compiler and "extern C" for a C++ + compiler on non-Win32 systems. This macro apears at the start of + every exported function that is part of the external API. It does + not appear on functions that are "external" in the C sense, but + which are internal to the library. */ +/* #undef PCRE_EXP_DEFN */ -#ifndef INVALID_FILE_ATTRIBUTES -#define INVALID_FILE_ATTRIBUTES (-1L) +/* Define if linking statically (TODO: make nice with Libtool) */ +/* #undef PCRE_STATIC */ + +/* When calling PCRE via the POSIX interface, additional working storage is + required for holding the pointers to capturing substrings because PCRE + requires three integers per substring, whereas the POSIX interface provides + only two. If the number of expected substrings is small, the wrapper + function uses space on the stack, because this is faster than using + malloc() for each call. The threshold above which the stack is no longer + used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it, + "configure" can be used to override this default. */ +#ifndef POSIX_MALLOC_THRESHOLD +#define POSIX_MALLOC_THRESHOLD 10 #endif -#if (_MSC_VER >= 1400) // VC8+ -#ifndef _CRT_SECURE_NO_DEPRECATE -#define _CRT_SECURE_NO_DEPRECATE +/* Define to 1 if you have the ANSI C header files. */ +#ifndef STDC_HEADERS +#define STDC_HEADERS 1 #endif -#ifndef _CRT_NONSTDC_NO_DEPRECATE -#define _CRT_NONSTDC_NO_DEPRECATE + +/* Define to allow pcregrep to be linked with libbz2, so that it is able to + handle .bz2 files. */ +/* #undef SUPPORT_LIBBZ2 */ + +/* Define to allow pcretest to be linked with libreadline. */ +/* #undef SUPPORT_LIBREADLINE */ + +/* Define to allow pcregrep to be linked with libz, so that it is able to + handle .gz files. */ +/* #undef SUPPORT_LIBZ */ + +/* Define to enable support for Unicode properties */ +/* #undef SUPPORT_UCP */ + +/* Define to enable support for the UTF-8 Unicode encoding. This will work + even in an EBCDIC environment, but it is incompatible with the EBCDIC + macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8, but + not both at once. */ +/* #undef SUPPORT_UTF8 */ + +/* Version number of package */ +#ifndef VERSION +#define VERSION "7.9" #endif -#endif // VC8+ -#pragma warning(disable: 4005 4003 4018) +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ -/* End */ +/* Define to `unsigned int' if <sys/types.h> does not define. */ +/* #undef size_t */ Modified: freeswitch/trunk/libs/win32/pcre/dftables.c ============================================================================== --- freeswitch/trunk/libs/win32/pcre/dftables.c (original) +++ freeswitch/trunk/libs/win32/pcre/dftables.c Tue Jun 9 12:35:48 2009 @@ -6,7 +6,7 @@ and semantics are as close as possible to those of the Perl 5 language. Written by Philip Hazel - Copyright (c) 1997-2005 University of Cambridge + Copyright (c) 1997-2008 University of Cambridge ----------------------------------------------------------------------------- Redistribution and use in source and binary forms, with or without @@ -38,14 +38,19 @@ */ -/* This is a freestanding support program to generate a file containing default -character tables for PCRE. The tables are built according to the default C +/* This is a freestanding support program to generate a file containing +character tables for PCRE. The tables are built according to the current locale. Now that pcre_maketables is a function visible to the outside world, we make use of its code from here in order to be consistent. */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + #include <ctype.h> #include <stdio.h> #include <string.h> +#include <locale.h> #include "pcre_internal.h" @@ -55,38 +60,60 @@ int main(int argc, char **argv) { -int i; FILE *f; -const unsigned char *tables = pcre_maketables(); -const unsigned char *base_of_tables = tables; +int i = 1; +const unsigned char *tables; +const unsigned char *base_of_tables; + +/* By default, the default C locale is used rather than what the building user +happens to have set. However, if the -L option is given, set the locale from +the LC_xxx environment variables. */ -if (argc != 2) +if (argc > 1 && strcmp(argv[1], "-L") == 0) + { + setlocale(LC_ALL, ""); /* Set from environment variables */ + i++; + } + +if (argc < i + 1) { fprintf(stderr, "dftables: one filename argument is required\n"); return 1; } -f = fopen(argv[1], "wb"); +tables = pcre_maketables(); +base_of_tables = tables; + +f = fopen(argv[i], "wb"); if (f == NULL) { fprintf(stderr, "dftables: failed to open %s for writing\n", argv[1]); return 1; } -/* There are two fprintf() calls here, because gcc in pedantic mode complains -about the very long string otherwise. */ +/* There are several fprintf() calls here, because gcc in pedantic mode +complains about the very long string otherwise. */ fprintf(f, "/*************************************************\n" "* Perl-Compatible Regular Expressions *\n" "*************************************************/\n\n" - "/* This file is automatically written by the dftables auxiliary \n" - "program. If you edit it by hand, you might like to edit the Makefile to \n" - "prevent its ever being regenerated.\n\n"); + "/* This file was automatically written by the dftables auxiliary\n" + "program. It contains character tables that are used when no external\n" + "tables are passed to PCRE by the application that calls it. The tables\n" + "are used only for characters whose code values are less than 256.\n\n"); +fprintf(f, + "The following #includes are present because without them gcc 4.x may remove\n" + "the array definition from the final binary if PCRE is built into a static\n" + "library and dead code stripping is activated. This leads to link errors.\n" + "Pulling in the header ensures that the array gets flagged as \"someone\n" + "outside this compilation unit might reference this\" and so it will always\n" + "be supplied to the linker. */\n\n" + "#ifdef HAVE_CONFIG_H\n" + "#include \"config.h\"\n" + "#endif\n\n" + "#include \"pcre_internal.h\"\n\n"); fprintf(f, - "This file contains the default tables for characters with codes less than\n" - "128 (ASCII characters). These tables are used when no external tables are\n" - "passed to PCRE. */\n\n" "const unsigned char _pcre_default_tables[] = {\n\n" "/* This table is a lower casing table. */\n\n"); @@ -162,7 +189,7 @@ else fprintf(f, "%3d-", i-8); if (isprint(i-1)) fprintf(f, " %c ", i-1); else fprintf(f, "%3d", i-1); -fprintf(f, " */\n\n/* End of chartables.c */\n"); +fprintf(f, " */\n\n/* End of pcre_chartables.c */\n"); fclose(f); free((void *)base_of_tables); Modified: freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj ============================================================================== --- freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj (original) +++ freeswitch/trunk/libs/win32/pcre/libpcre.2008.vcproj Tue Jun 9 12:35:48 2009 @@ -55,8 +55,8 @@ <Tool Name="VCCLCompilerTool" Optimization="0" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H" MinimalRebuild="true" BasicRuntimeChecks="3" RuntimeLibrary="3" @@ -104,9 +104,9 @@ /> </Configuration> <Configuration - Name="Release|Win32" - OutputDirectory="$(ConfigurationName)" - IntermediateDirectory="$(ConfigurationName)" + Name="Debug|x64" + OutputDirectory="$(PlatformName)\$(ConfigurationName)" + IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" ConfigurationType="4" UseOfMFC="0" ATLMinimizesCRunTimeLibraryUsage="false" @@ -130,35 +130,35 @@ /> <Tool Name="VCMIDLTool" - PreprocessorDefinitions="NDEBUG" + PreprocessorDefinitions="_DEBUG" MkTypLibCompatible="true" SuppressStartupBanner="true" - TargetEnvironment="1" - TypeLibraryName=".\Release/libpcre.tlb" + TargetEnvironment="3" + TypeLibraryName=".\Debug/libpcre.tlb" HeaderFileName="" /> <Tool Name="VCCLCompilerTool" - Optimization="2" - InlineFunctionExpansion="1" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC" - StringPooling="true" - RuntimeLibrary="2" - EnableFunctionLevelLinking="true" + Optimization="0" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H" + MinimalRebuild="true" + BasicRuntimeChecks="3" + RuntimeLibrary="3" PrecompiledHeaderFile="$(OutDir)\libpcre.pch" AssemblerListingLocation="" ObjectFile="$(IntDir)\" ProgramDataBaseFileName="$(IntDir)\vc80.pdb" WarningLevel="3" SuppressStartupBanner="true" + DebugInformationFormat="3" /> <Tool Name="VCManagedResourceCompilerTool" /> <Tool Name="VCResourceCompilerTool" - PreprocessorDefinitions="NDEBUG" + PreprocessorDefinitions="_DEBUG" Culture="1033" /> <Tool @@ -189,10 +189,10 @@ /> </Configuration> <Configuration - Name="Debug DLL|Win32" - OutputDirectory="$(SolutionDir)Debug" + Name="Release|Win32" + OutputDirectory="$(ConfigurationName)" IntermediateDirectory="$(ConfigurationName)" - ConfigurationType="2" + ConfigurationType="4" UseOfMFC="0" ATLMinimizesCRunTimeLibraryUsage="false" > @@ -215,61 +215,49 @@ /> <Tool Name="VCMIDLTool" - PreprocessorDefinitions="_DEBUG" + PreprocessorDefinitions="NDEBUG" MkTypLibCompatible="true" SuppressStartupBanner="true" TargetEnvironment="1" - TypeLibraryName=".\Debug/libpcre.tlb" + TypeLibraryName=".\Release/libpcre.tlb" HeaderFileName="" /> <Tool Name="VCCLCompilerTool" - Optimization="0" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT" - MinimalRebuild="true" - BasicRuntimeChecks="3" - RuntimeLibrary="3" + Optimization="2" + InlineFunctionExpansion="1" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H" + StringPooling="true" + RuntimeLibrary="2" + EnableFunctionLevelLinking="true" PrecompiledHeaderFile="$(OutDir)\libpcre.pch" AssemblerListingLocation="" ObjectFile="$(IntDir)\" ProgramDataBaseFileName="$(IntDir)\vc80.pdb" WarningLevel="3" SuppressStartupBanner="true" - DebugInformationFormat="3" /> <Tool Name="VCManagedResourceCompilerTool" /> <Tool Name="VCResourceCompilerTool" - PreprocessorDefinitions="_DEBUG" + PreprocessorDefinitions="NDEBUG" Culture="1033" /> <Tool Name="VCPreLinkEventTool" /> <Tool - Name="VCLinkerTool" + Name="VCLibrarianTool" + LinkLibraryDependencies="true" AdditionalDependencies="odbc32.lib odbccp32.lib" - OutputFile="$(OutDir)\$(ProjectName).dll" - LinkIncremental="1" - SuppressStartupBanner="true" - ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def" - GenerateDebugInformation="true" - ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb" - RandomizedBaseAddress="1" - DataExecutionPrevention="0" - ImportLibrary="$(IntDir)\$(ProjectName).lib" - TargetMachine="1" /> <Tool Name="VCALinkTool" /> <Tool - Name="VCManifestTool" - /> - <Tool Name="VCXDCMakeTool" /> <Tool @@ -281,18 +269,15 @@ Name="VCFxCopTool" /> <Tool - Name="VCAppVerifierTool" - /> - <Tool Name="VCPostBuildEventTool" CommandLine="" /> </Configuration> <Configuration - Name="Release DLL|Win32" - OutputDirectory="$(SolutionDir)Release" - IntermediateDirectory="$(ConfigurationName)" - ConfigurationType="2" + Name="Release|x64" + OutputDirectory="$(PlatformName)\$(ConfigurationName)" + IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" + ConfigurationType="4" UseOfMFC="0" ATLMinimizesCRunTimeLibraryUsage="false" > @@ -318,7 +303,7 @@ PreprocessorDefinitions="NDEBUG" MkTypLibCompatible="true" SuppressStartupBanner="true" - TargetEnvironment="1" + TargetEnvironment="3" TypeLibraryName=".\Release/libpcre.tlb" HeaderFileName="" /> @@ -326,8 +311,8 @@ Name="VCCLCompilerTool" Optimization="2" InlineFunctionExpansion="1" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H" StringPooling="true" RuntimeLibrary="2" EnableFunctionLevelLinking="true" @@ -350,25 +335,14 @@ Name="VCPreLinkEventTool" /> <Tool - Name="VCLinkerTool" + Name="VCLibrarianTool" + LinkLibraryDependencies="true" AdditionalDependencies="odbc32.lib odbccp32.lib" - OutputFile="$(OutDir)\$(ProjectName).dll" - LinkIncremental="1" - SuppressStartupBanner="true" - ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def" - ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb" - RandomizedBaseAddress="1" - DataExecutionPrevention="0" - ImportLibrary="$(IntDir)\$(ProjectName).lib" - TargetMachine="1" /> <Tool Name="VCALinkTool" /> <Tool - Name="VCManifestTool" - /> - <Tool Name="VCXDCMakeTool" /> <Tool @@ -380,18 +354,15 @@ Name="VCFxCopTool" /> <Tool - Name="VCAppVerifierTool" - /> - <Tool Name="VCPostBuildEventTool" CommandLine="" /> </Configuration> <Configuration - Name="Debug|x64" - OutputDirectory="$(PlatformName)\$(ConfigurationName)" - IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" - ConfigurationType="4" + Name="Debug DLL|Win32" + OutputDirectory="$(SolutionDir)Debug" + IntermediateDirectory="$(ConfigurationName)" + ConfigurationType="2" UseOfMFC="0" ATLMinimizesCRunTimeLibraryUsage="false" > @@ -417,15 +388,15 @@ PreprocessorDefinitions="_DEBUG" MkTypLibCompatible="true" SuppressStartupBanner="true" - TargetEnvironment="3" + TargetEnvironment="1" TypeLibraryName=".\Debug/libpcre.tlb" HeaderFileName="" /> <Tool Name="VCCLCompilerTool" Optimization="0" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H" MinimalRebuild="true" BasicRuntimeChecks="3" RuntimeLibrary="3" @@ -449,14 +420,26 @@ Name="VCPreLinkEventTool" /> <Tool - Name="VCLibrarianTool" - LinkLibraryDependencies="true" + Name="VCLinkerTool" AdditionalDependencies="odbc32.lib odbccp32.lib" + OutputFile="$(OutDir)\$(ProjectName).dll" + LinkIncremental="1" + SuppressStartupBanner="true" + ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def" + GenerateDebugInformation="true" + ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb" + RandomizedBaseAddress="1" + DataExecutionPrevention="0" + ImportLibrary="$(IntDir)\$(ProjectName).lib" + TargetMachine="1" /> <Tool Name="VCALinkTool" /> <Tool + Name="VCManifestTool" + /> + <Tool Name="VCXDCMakeTool" /> <Tool @@ -468,15 +451,18 @@ Name="VCFxCopTool" /> <Tool + Name="VCAppVerifierTool" + /> + <Tool Name="VCPostBuildEventTool" CommandLine="" /> </Configuration> <Configuration - Name="Release|x64" - OutputDirectory="$(PlatformName)\$(ConfigurationName)" + Name="Debug DLL|x64" + OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)" IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" - ConfigurationType="4" + ConfigurationType="2" UseOfMFC="0" ATLMinimizesCRunTimeLibraryUsage="false" > @@ -499,49 +485,61 @@ /> <Tool Name="VCMIDLTool" - PreprocessorDefinitions="NDEBUG" + PreprocessorDefinitions="_DEBUG" MkTypLibCompatible="true" SuppressStartupBanner="true" TargetEnvironment="3" - TypeLibraryName=".\Release/libpcre.tlb" + TypeLibraryName=".\Debug/libpcre.tlb" HeaderFileName="" /> <Tool Name="VCCLCompilerTool" - Optimization="2" - InlineFunctionExpansion="1" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC" - StringPooling="true" - RuntimeLibrary="2" - EnableFunctionLevelLinking="true" + Optimization="0" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H" + MinimalRebuild="true" + BasicRuntimeChecks="3" + RuntimeLibrary="3" PrecompiledHeaderFile="$(OutDir)\libpcre.pch" AssemblerListingLocation="" ObjectFile="$(IntDir)\" ProgramDataBaseFileName="$(IntDir)\vc80.pdb" WarningLevel="3" SuppressStartupBanner="true" + DebugInformationFormat="3" /> <Tool Name="VCManagedResourceCompilerTool" /> <Tool Name="VCResourceCompilerTool" - PreprocessorDefinitions="NDEBUG" + PreprocessorDefinitions="_DEBUG" Culture="1033" /> <Tool Name="VCPreLinkEventTool" /> <Tool - Name="VCLibrarianTool" - LinkLibraryDependencies="true" + Name="VCLinkerTool" AdditionalDependencies="odbc32.lib odbccp32.lib" + OutputFile="$(OutDir)\$(ProjectName).dll" + LinkIncremental="1" + SuppressStartupBanner="true" + ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def" + GenerateDebugInformation="true" + ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb" + RandomizedBaseAddress="1" + DataExecutionPrevention="0" + ImportLibrary="$(IntDir)\$(ProjectName).lib" + TargetMachine="17" /> <Tool Name="VCALinkTool" /> <Tool + Name="VCManifestTool" + /> + <Tool Name="VCXDCMakeTool" /> <Tool @@ -553,14 +551,17 @@ Name="VCFxCopTool" /> <Tool + Name="VCAppVerifierTool" + /> + <Tool Name="VCPostBuildEventTool" CommandLine="" /> </Configuration> <Configuration - Name="Debug DLL|x64" - OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)" - IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" + Name="Release DLL|Win32" + OutputDirectory="$(SolutionDir)Release" + IntermediateDirectory="$(ConfigurationName)" ConfigurationType="2" UseOfMFC="0" ATLMinimizesCRunTimeLibraryUsage="false" @@ -584,35 +585,35 @@ /> <Tool Name="VCMIDLTool" - PreprocessorDefinitions="_DEBUG" + PreprocessorDefinitions="NDEBUG" MkTypLibCompatible="true" SuppressStartupBanner="true" - TargetEnvironment="3" - TypeLibraryName=".\Debug/libpcre.tlb" + TargetEnvironment="1" + TypeLibraryName=".\Release/libpcre.tlb" HeaderFileName="" /> <Tool Name="VCCLCompilerTool" - Optimization="0" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT" - MinimalRebuild="true" - BasicRuntimeChecks="3" - RuntimeLibrary="3" + Optimization="2" + InlineFunctionExpansion="1" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H" + StringPooling="true" + RuntimeLibrary="2" + EnableFunctionLevelLinking="true" PrecompiledHeaderFile="$(OutDir)\libpcre.pch" AssemblerListingLocation="" ObjectFile="$(IntDir)\" ProgramDataBaseFileName="$(IntDir)\vc80.pdb" WarningLevel="3" SuppressStartupBanner="true" - DebugInformationFormat="3" /> <Tool Name="VCManagedResourceCompilerTool" /> <Tool Name="VCResourceCompilerTool" - PreprocessorDefinitions="_DEBUG" + PreprocessorDefinitions="NDEBUG" Culture="1033" /> <Tool @@ -625,12 +626,11 @@ LinkIncremental="1" SuppressStartupBanner="true" ModuleDefinitionFile="$(InputDir)..\..\pcre\pcre.def" - GenerateDebugInformation="true" ProgramDatabaseFile="$(IntDir)\$(ProjectName).pdb" RandomizedBaseAddress="1" DataExecutionPrevention="0" ImportLibrary="$(IntDir)\$(ProjectName).lib" - TargetMachine="17" + TargetMachine="1" /> <Tool Name="VCALinkTool" @@ -695,8 +695,8 @@ Name="VCCLCompilerTool" Optimization="2" InlineFunctionExpansion="1" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H" StringPooling="true" RuntimeLibrary="2" EnableFunctionLevelLinking="true" @@ -775,990 +775,54 @@ <File RelativePath="..\..\pcre\pcre_config.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_dfa_exec.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_exec.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_fullinfo.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_get.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_globals.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_info.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_maketables.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_ord2utf8.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_refcount.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_study.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_tables.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_try_flipped.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_ucp_searchfuncs.c" @@ -1767,306 +831,14 @@ <File RelativePath="..\..\pcre\pcre_valid_utf8.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_version.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_xclass.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - </File> - <File - RelativePath="..\..\pcre\pcreposix.c" - > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|x64" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> </Filter> <Filter Modified: freeswitch/trunk/libs/win32/pcre/libpcre.vcproj ============================================================================== --- freeswitch/trunk/libs/win32/pcre/libpcre.vcproj (original) +++ freeswitch/trunk/libs/win32/pcre/libpcre.vcproj Tue Jun 9 12:35:48 2009 @@ -51,8 +51,8 @@ <Tool Name="VCCLCompilerTool" Optimization="0" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H" MinimalRebuild="true" BasicRuntimeChecks="3" RuntimeLibrary="3" @@ -137,8 +137,8 @@ Name="VCCLCompilerTool" Optimization="2" InlineFunctionExpansion="1" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;PCRE_STATIC;HAVE_CONFIG_H" StringPooling="true" RuntimeLibrary="2" EnableFunctionLevelLinking="true" @@ -221,8 +221,8 @@ <Tool Name="VCCLCompilerTool" Optimization="0" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;DEBUG;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H" MinimalRebuild="true" BasicRuntimeChecks="3" RuntimeLibrary="3" @@ -323,8 +323,8 @@ Name="VCCLCompilerTool" Optimization="2" InlineFunctionExpansion="1" - AdditionalIncludeDirectories="./" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT" + AdditionalIncludeDirectories=""$(ProjectDir)";"$(ProjectDir)..\..\pcre"" + PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;PCRE_DEFINITION;DLL_EXPORT;HAVE_CONFIG_H" StringPooling="true" RuntimeLibrary="2" EnableFunctionLevelLinking="true" @@ -404,522 +404,54 @@ <File RelativePath="..\..\pcre\pcre_config.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_dfa_exec.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_exec.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_fullinfo.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_get.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_globals.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_info.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_maketables.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_ord2utf8.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_refcount.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_study.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_tables.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_try_flipped.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_ucp_searchfuncs.c" @@ -928,162 +460,18 @@ <File RelativePath="..\..\pcre\pcre_valid_utf8.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_version.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcre_xclass.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> <File RelativePath="..\..\pcre\pcreposix.c" > - <FileConfiguration - Name="Debug|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Debug DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;_DEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> - <FileConfiguration - Name="Release DLL|Win32" - > - <Tool - Name="VCCLCompilerTool" - AdditionalIncludeDirectories="" - PreprocessorDefinitions="_WIN32;WIN32;NDEBUG;_WINDOWS;_USRDLL;LIBPCRE_EXPORTS;SUPPORT_UTF8;SUPPORT_UCP;POSIX_MALLOC_THRESHOLD=10;NO_RECURSE;$(NoInherit)" - /> - </FileConfiguration> </File> </Filter> <Filter Modified: freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj ============================================================================== --- freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj (original) +++ freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.2008.vcproj Tue Jun 9 12:35:48 2009 @@ -46,7 +46,7 @@ Name="VCCLCompilerTool" Optimization="0" AdditionalIncludeDirectories="..\..\pcre\" - PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE" + PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H" MinimalRebuild="true" BasicRuntimeChecks="3" RuntimeLibrary="2" @@ -97,12 +97,11 @@ /> </Configuration> <Configuration - Name="Release|Win32" - OutputDirectory="$(ConfigurationName)" - IntermediateDirectory="$(ConfigurationName)" + Name="Debug|x64" + OutputDirectory="$(PlatformName)\$(ConfigurationName)" + IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" ConfigurationType="1" CharacterSet="1" - WholeProgramOptimization="1" > <Tool Name="VCPreBuildEventTool" @@ -119,11 +118,15 @@ /> <Tool Name="VCMIDLTool" + TargetEnvironment="3" /> <Tool Name="VCCLCompilerTool" + Optimization="0" AdditionalIncludeDirectories="..\..\pcre\" - PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE" + PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H" + MinimalRebuild="true" + BasicRuntimeChecks="3" RuntimeLibrary="2" UsePrecompiledHeader="0" WarningLevel="3" @@ -141,14 +144,12 @@ <Tool Name="VCLinkerTool" OutputFile="$(OutDir)\dftables.exe" - LinkIncremental="1" + LinkIncremental="2" GenerateDebugInformation="true" SubSystem="1" - OptimizeReferences="2" - EnableCOMDATFolding="2" - RandomizedBaseAddress="2" + RandomizedBaseAddress="1" DataExecutionPrevention="0" - TargetMachine="1" + TargetMachine="17" /> <Tool Name="VCALinkTool" @@ -174,11 +175,12 @@ /> </Configuration> <Configuration - Name="Debug|x64" - OutputDirectory="$(PlatformName)\$(ConfigurationName)" - IntermediateDirectory="$(PlatformName)\$(ConfigurationName)" + Name="Release|Win32" + OutputDirectory="$(ConfigurationName)" + IntermediateDirectory="$(ConfigurationName)" ConfigurationType="1" CharacterSet="1" + WholeProgramOptimization="1" > <Tool Name="VCPreBuildEventTool" @@ -195,15 +197,11 @@ /> <Tool Name="VCMIDLTool" - TargetEnvironment="3" /> <Tool Name="VCCLCompilerTool" - Optimization="0" AdditionalIncludeDirectories="..\..\pcre\" - PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE" - MinimalRebuild="true" - BasicRuntimeChecks="3" + PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H" RuntimeLibrary="2" UsePrecompiledHeader="0" WarningLevel="3" @@ -221,12 +219,14 @@ <Tool Name="VCLinkerTool" OutputFile="$(OutDir)\dftables.exe" - LinkIncremental="2" + LinkIncremental="1" GenerateDebugInformation="true" SubSystem="1" - RandomizedBaseAddress="1" + OptimizeReferences="2" + EnableCOMDATFolding="2" + RandomizedBaseAddress="2" DataExecutionPrevention="0" - TargetMachine="17" + TargetMachine="1" /> <Tool Name="VCALinkTool" @@ -279,7 +279,7 @@ <Tool Name="VCCLCompilerTool" AdditionalIncludeDirectories="..\..\pcre\" - PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE" + PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H" RuntimeLibrary="2" UsePrecompiledHeader="0" WarningLevel="3" Modified: freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj ============================================================================== --- freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj (original) +++ freeswitch/trunk/libs/win32/pcre/pcre_chartables.c.vcproj Tue Jun 9 12:35:48 2009 @@ -42,7 +42,7 @@ Name="VCCLCompilerTool" Optimization="0" AdditionalIncludeDirectories="..\..\pcre\" - PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE" + PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H" MinimalRebuild="true" BasicRuntimeChecks="3" RuntimeLibrary="3" @@ -121,7 +121,7 @@ <Tool Name="VCCLCompilerTool" AdditionalIncludeDirectories="..\..\pcre\" - PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE" + PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE;HAVE_CONFIG_H" RuntimeLibrary="2" UsePrecompiledHeader="0" WarningLevel="3"