[Freeswitch-svn] [commit] r1151 - in freeswitch/branches/cypromis/trunk: . build/config src/include

Author: cypromis Date: Fri Apr 14 04:25:32 2006 New Revision: 1151 Modified: freeswitch/branches/cypromis/trunk/INSTALL freeswitch/branches/cypromis/trunk/Makefile.in freeswitch/branches/cypromis/trunk/build/config/compile freeswitch/branches/cypromis/trunk/build/config/config.guess freeswitch/branches/cypromis/trunk/build/config/config.sub freeswitch/branches/cypromis/trunk/build/config/depcomp freeswitch/branches/cypromis/trunk/build/config/install-sh freeswitch/branches/cypromis/trunk/build/config/ltmain.sh freeswitch/branches/cypromis/trunk/build/config/missing freeswitch/branches/cypromis/trunk/configure freeswitch/branches/cypromis/trunk/src/include/switch_am_config.h.in Log: step by step to ansi and proper automake :)) Modified: freeswitch/branches/cypromis/trunk/INSTALL ============================================================================== --- freeswitch/branches/cypromis/trunk/INSTALL (original) +++ freeswitch/branches/cypromis/trunk/INSTALL Fri Apr 14 04:25:32 2006 @@ -1,16 +1,13 @@ -Installation Instructions -************************* +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives + This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== -These are generic installation instructions. + These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -70,9 +67,9 @@ Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here @@ -85,7 +82,7 @@ Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the @@ -102,19 +99,19 @@ Installation Names ================== -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular +options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. @@ -125,7 +122,7 @@ Optional Features ================= -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -140,11 +137,11 @@ Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -159,7 +156,7 @@ need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will +use the `--target=TYPE' option to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a @@ -170,9 +167,9 @@ Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -181,7 +178,7 @@ Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -189,18 +186,14 @@ ./configure CC=/usr/local2/bin/gcc -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). - /bin/bash ./configure CONFIG_SHELL=/bin/bash - -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. - `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' Modified: freeswitch/branches/cypromis/trunk/Makefile.in ============================================================================== --- freeswitch/branches/cypromis/trunk/Makefile.in (original) +++ freeswitch/branches/cypromis/trunk/Makefile.in Fri Apr 14 04:25:32 2006 @@ -42,7 +42,8 @@ bin_PROGRAMS = freeswitch$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/configure $(top_srcdir)/src/include/config.h.in \ + $(top_srcdir)/configure \ + $(top_srcdir)/src/include/switch_am_config.h.in \ $(top_srcdir)/src/include/switch_version.h.in AUTHORS COPYING \ ChangeLog INSTALL NEWS build/config/compile \ build/config/config.guess build/config/config.sub \ @@ -63,13 +64,14 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(mkdir_p) -CONFIG_HEADER = $(top_builddir)/src/include/config.h +CONFIG_HEADER = $(top_builddir)/src/include/switch_am_config.h CONFIG_CLEAN_FILES = src/include/switch_version.h am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(library_includedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libfreeswitch_la_DEPENDENCIES = -am_libfreeswitch_la_OBJECTS = libfreeswitch_la-switch_buffer.lo \ +am_libfreeswitch_la_OBJECTS = libfreeswitch_la-switch_rtp.lo \ + libfreeswitch_la-switch_buffer.lo \ libfreeswitch_la-switch_caller.lo \ libfreeswitch_la-switch_channel.lo \ libfreeswitch_la-switch_config.lo \ @@ -79,7 +81,7 @@ libfreeswitch_la-switch_utils.lo \ libfreeswitch_la-switch_event.lo \ libfreeswitch_la-switch_resample.lo \ - libfreeswitch_la-switch_ivr.lo + libfreeswitch_la-switch_ivr.lo libfreeswitch_la-switch_stun.lo nodist_libfreeswitch_la_OBJECTS = libfreeswitch_la_OBJECTS = $(am_libfreeswitch_la_OBJECTS) \ $(nodist_libfreeswitch_la_OBJECTS) @@ -102,6 +104,8 @@ @AMDEP_TRUE@ ./$(DEPDIR)/libfreeswitch_la-switch_ivr.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/libfreeswitch_la-switch_resample.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/libfreeswitch_la-switch_rtp.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/libfreeswitch_la-switch_stun.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/libfreeswitch_la-switch_utils.Plo COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @@ -256,13 +260,13 @@ PREFIX = $(prefix) SOLINK = @new_SOLINK@ AM_LDFLAGS = @new_AM_LDFLAGS@ -L$(PREFIX)/lib $(shell $(APR_CONFIG) --link-ld --libs ) $(shell $(APU_CONFIG) --link-ld --libs ) -lm -L/usr/local/lib -AM_CFLAGS = @new_AM_CFLAGS@ -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags --cppflags --includes) $(shell $(APU_CONFIG) --includes) -I$(PWD)/src/sqlite -I$(PWD) -I$(PWD)/src/include -I$(PREFIX)/include -DSWITCH_MOD_DIR=\"$(PREFIX)/mod\" -DSWITCH_PREFIX_DIR=\"$(PREFIX)\" -DSWITCH_CONF_DIR=\"$(PREFIX)/conf\" -DSWITCH_DB_DIR=\"$(PREFIX)/db\" -DSWITCH_LOG_DIR=\"$(PREFIX)/log\" -DSWITCH_SCRIPT_DIR=\"$(PREFIX)/scripts\" +AM_CFLAGS = @new_AM_CFLAGS@ -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags --cppflags --includes) -I${prefix}/include/srtp $(shell $(APU_CONFIG) --includes) -I$(PWD)/src/sqlite -I$(PWD) -I$(PWD)/src/include -I$(PREFIX)/include -DSWITCH_MOD_DIR=\"$(PREFIX)/mod\" -DSWITCH_PREFIX_DIR=\"$(PREFIX)\" -DSWITCH_CONF_DIR=\"$(PREFIX)/conf\" -DSWITCH_DB_DIR=\"$(PREFIX)/db\" -DSWITCH_LOG_DIR=\"$(PREFIX)/log\" -DSWITCH_SCRIPT_DIR=\"$(PREFIX)/scripts\" DYNAMIC_LIB_EXTEN = @new_DYNAMIC_LIB_EXTEN@ APR_CONFIG = $(prefix)/bin/apr-1-config APU_CONFIG = $(prefix)/bin/apu-1-config OSARCH = $(shell uname -s) libfreeswitch_la_SOURCES = \ -src/include/config.h\ +src/include/switch_am_config.h\ src/include/switch.h\ src/include/switch_apr.h\ src/include/switch_buffer.h\ @@ -282,6 +286,9 @@ src/include/switch_types.h\ src/include/switch_utils.h\ src/include/switch_version.h\ +src/include/switch_rtp.h\ +src/include/switch_stun.h\ +src/switch_rtp.c\ src/switch_buffer.c \ src/switch_caller.c \ src/switch_channel.c \ @@ -292,14 +299,15 @@ src/switch_utils.c \ src/switch_event.c \ src/switch_resample.c \ -src/switch_ivr.c +src/switch_ivr.c \ +src/switch_stun.c #bindir = $(PREFIX)/bin #libdir = $(PREFIX)/lib library_includedir = $(PREFIX)/include library_include_HEADERS = \ -src/include/config.h\ +src/include/switch_am_config.h\ src/include/switch.h\ src/include/switch_apr.h\ src/include/switch_buffer.h\ @@ -318,20 +326,22 @@ src/include/switch_sqlite.h\ src/include/switch_types.h\ src/include/switch_utils.h\ -src/include/switch_version.h +src/include/switch_rtp.h\ +src/include/switch_version.h\ +src/include/switch_stun.h BUILT_SOURCES = version depends CLEANFILES = src/include/switch_version.h lib_LTLIBRARIES = libfreeswitch.la libfreeswitch_la_CFLAGS = $(AM_CFLAGS) libfreeswitch_la_LDFLAGS = -version-info 1:0:0 -libfreeswitch_la_LIBADD = -lteletone -lresample -lsqlite3 +libfreeswitch_la_LIBADD = -lteletone -lresample -lsrtp -lsqlite3 nodist_libfreeswitch_la_SOURCES = src/include/switch_version.h freeswitch_SOURCES = src/switch.c\ src/include/switch_version.h freeswitch_CFLAGS = $(AM_CFLAGS) -freeswitch_LDADD = ${top_builddir}/libfreeswitch.la +freeswitch_LDADD = ${top_builddir}/libfreeswitch.la all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -371,22 +381,22 @@ $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -src/include/config.h: src/include/stamp-h1 +src/include/switch_am_config.h: src/include/stamp-h1 @if test ! -f $@; then \ rm -f src/include/stamp-h1; \ $(MAKE) src/include/stamp-h1; \ else :; fi -src/include/stamp-h1: $(top_srcdir)/src/include/config.h.in $(top_builddir)/config.status +src/include/stamp-h1: $(top_srcdir)/src/include/switch_am_config.h.in $(top_builddir)/config.status @rm -f src/include/stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status src/include/config.h -$(top_srcdir)/src/include/config.h.in: $(am__configure_deps) + cd $(top_builddir) && $(SHELL) ./config.status src/include/switch_am_config.h +$(top_srcdir)/src/include/switch_am_config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f src/include/stamp-h1 touch $@ distclean-hdr: - -rm -f src/include/config.h src/include/stamp-h1 + -rm -f src/include/switch_am_config.h src/include/stamp-h1 src/include/switch_version.h: $(top_builddir)/config.status $(top_srcdir)/src/include/switch_version.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-libLTLIBRARIES: $(lib_LTLIBRARIES) @@ -467,6 +477,8 @@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_ivr.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_resample.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_rtp.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_stun.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfreeswitch_la-switch_utils.Plo@am__quote@ .c.o: @@ -493,6 +505,30 @@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +libfreeswitch_la-switch_rtp.o: src/switch_rtp.c +@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_rtp.o -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" -c -o libfreeswitch_la-switch_rtp.o `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_rtp.Po"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_rtp.c' object='libfreeswitch_la-switch_rtp.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/libfreeswitch_la-switch_rtp.Po' tmpdepfile='$(DEPDIR)/libfreeswitch_la-switch_rtp.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_rtp.o `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c + +libfreeswitch_la-switch_rtp.obj: src/switch_rtp.c +@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_rtp.obj -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" -c -o libfreeswitch_la-switch_rtp.obj `if test -f 'src/switch_rtp.c'; then $(CYGPATH_W) 'src/switch_rtp.c'; else $(CYGPATH_W) '$(srcdir)/src/switch_rtp.c'; fi`; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_rtp.Po"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_rtp.c' object='libfreeswitch_la-switch_rtp.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/libfreeswitch_la-switch_rtp.Po' tmpdepfile='$(DEPDIR)/libfreeswitch_la-switch_rtp.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_rtp.obj `if test -f 'src/switch_rtp.c'; then $(CYGPATH_W) 'src/switch_rtp.c'; else $(CYGPATH_W) '$(srcdir)/src/switch_rtp.c'; fi` + +libfreeswitch_la-switch_rtp.lo: src/switch_rtp.c +@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_rtp.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" -c -o libfreeswitch_la-switch_rtp.lo `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_rtp.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_rtp.c' object='libfreeswitch_la-switch_rtp.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/libfreeswitch_la-switch_rtp.Plo' tmpdepfile='$(DEPDIR)/libfreeswitch_la-switch_rtp.TPlo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_rtp.lo `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c + libfreeswitch_la-switch_buffer.o: src/switch_buffer.c @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_buffer.o -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo" -c -o libfreeswitch_la-switch_buffer.o `test -f 'src/switch_buffer.c' || echo '$(srcdir)/'`src/switch_buffer.c; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_buffer.Po"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo"; exit 1; fi @@ -757,6 +793,30 @@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_ivr.lo `test -f 'src/switch_ivr.c' || echo '$(srcdir)/'`src/switch_ivr.c +libfreeswitch_la-switch_stun.o: src/switch_stun.c +@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_stun.o -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" -c -o libfreeswitch_la-switch_stun.o `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_stun.Po"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_stun.c' object='libfreeswitch_la-switch_stun.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/libfreeswitch_la-switch_stun.Po' tmpdepfile='$(DEPDIR)/libfreeswitch_la-switch_stun.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_stun.o `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c + +libfreeswitch_la-switch_stun.obj: src/switch_stun.c +@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_stun.obj -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" -c -o libfreeswitch_la-switch_stun.obj `if test -f 'src/switch_stun.c'; then $(CYGPATH_W) 'src/switch_stun.c'; else $(CYGPATH_W) '$(srcdir)/src/switch_stun.c'; fi`; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_stun.Po"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_stun.c' object='libfreeswitch_la-switch_stun.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/libfreeswitch_la-switch_stun.Po' tmpdepfile='$(DEPDIR)/libfreeswitch_la-switch_stun.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_stun.obj `if test -f 'src/switch_stun.c'; then $(CYGPATH_W) 'src/switch_stun.c'; else $(CYGPATH_W) '$(srcdir)/src/switch_stun.c'; fi` + +libfreeswitch_la-switch_stun.lo: src/switch_stun.c +@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_stun.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" -c -o libfreeswitch_la-switch_stun.lo `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_stun.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/switch_stun.c' object='libfreeswitch_la-switch_stun.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/libfreeswitch_la-switch_stun.Plo' tmpdepfile='$(DEPDIR)/libfreeswitch_la-switch_stun.TPlo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_stun.lo `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c + freeswitch-switch.o: src/switch.c @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(freeswitch_CFLAGS) $(CFLAGS) -MT freeswitch-switch.o -MD -MP -MF "$(DEPDIR)/freeswitch-switch.Tpo" -c -o freeswitch-switch.o `test -f 'src/switch.c' || echo '$(srcdir)/'`src/switch.c; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/freeswitch-switch.Tpo" "$(DEPDIR)/freeswitch-switch.Po"; else rm -f "$(DEPDIR)/freeswitch-switch.Tpo"; exit 1; fi @@ -1205,6 +1265,7 @@ ./build/buildlib.sh . install apr-util-1.2.6.tar.gz --with-apr=../apr-1.2.6 --prefix=$(PREFIX) ./build/buildlib.sh . libresample-0.1.3.tgz --prefix=$(PREFIX) ./build/buildlib.sh . install libteletone --prefix=$(PREFIX) + ./build/buildlib.sh . install srtp --prefix=$(PREFIX) rm build/freeswitch.env modules: $(NAME) @@ -1240,7 +1301,7 @@ wayclean: clean modclean modwipe: - rm -f $(PREFIX)/mod/*.so + rm -f $(PREFIX)/mod/*.${DYNAMIC_LIB_EXTEN} install_mod: modules @echo Installing $(NAME) Modified: freeswitch/branches/cypromis/trunk/build/config/compile ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/compile (original) +++ freeswitch/branches/cypromis/trunk/build/config/compile Fri Apr 14 04:25:32 2006 @@ -1,9 +1,9 @@ #! /bin/sh # Wrapper for compilers which do not understand `-c -o'. -scriptversion=2005-05-14.22 +scriptversion=2003-11-09.00 -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc. # Written by Tom Tromey <tromey@cygnus.com>. # # This program is free software; you can redistribute it and/or modify @@ -18,7 +18,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -47,49 +47,45 @@ Report bugs to <bug-automake@gnu.org>. EOF - exit $? + exit 0 ;; -v | --v*) echo "compile $scriptversion" - exit $? + exit 0 ;; esac + +prog=$1 +shift + ofile= cfile= -eat= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as `compile cc -o foo foo.c'. - # So we strip `-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi +args= +while test $# -gt 0; do + case "$1" in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we do something ugly here. + ofile=$2 + shift + case "$ofile" in + *.o | *.obj) + ;; + *) + args="$args -o $ofile" + ofile= + ;; + esac + ;; + *.c) + cfile=$1 + args="$args $1" + ;; + *) + args="$args $1" + ;; + esac shift done @@ -99,38 +95,36 @@ # normal compilation that the losing compiler can handle. If no # `.c' file was seen then we are probably linking. That is also # ok. - exec "$@" + exec "$prog" $args fi # Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` +cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d +lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then + if mkdir $lockdir > /dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 +trap "rmdir $lockdir; exit 1" 1 2 15 # Run the compile. -"$@" -ret=$? +"$prog" $args +status=$? if test -f "$cofile"; then mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - mv "${cofile}bj" "$ofile" fi -rmdir "$lockdir" -exit $ret +rmdir $lockdir +exit $status # Local Variables: # mode: shell-script Modified: freeswitch/branches/cypromis/trunk/build/config/config.guess ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/config.guess (original) +++ freeswitch/branches/cypromis/trunk/build/config/config.guess Fri Apr 14 04:25:32 2006 @@ -1,9 +1,9 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -timestamp='2005-07-08' +timestamp='2004-03-03' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -17,15 +17,13 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. - # Originally written by Per Bothner <per@bothner.com>. # Please send patches to <config-patches@gnu.org>. Submit a context # diff and a properly formatted ChangeLog entry. @@ -55,7 +53,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -68,11 +66,11 @@ while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; + echo "$timestamp" ; exit 0 ;; --version | -v ) - echo "$version" ; exit ;; + echo "$version" ; exit 0 ;; --help | --h* | -h ) - echo "$usage"; exit ;; + echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -125,7 +123,7 @@ ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' +esac ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -198,20 +196,64 @@ # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" - exit ;; + exit 0 ;; + amd64:OpenBSD:*:*) + echo x86_64-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + cats:OpenBSD:*:*) + echo arm-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pegasos:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; + exit 0 ;; macppc:MirBSD:*:*) echo powerppc-unknown-mirbsd${UNAME_RELEASE} - exit ;; + exit 0 ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; + exit 0 ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -264,43 +306,40 @@ # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; + exit 0 ;; + Alpha*:OpenVMS:*:*) + echo alpha-hp-vms + exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix - exit ;; + exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 - exit ;; + exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 - exit ;; + exit 0;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; + exit 0 ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos - exit ;; + exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; + exit 0 ;; *:OS400:*:*) echo powerpc-ibm-os400 - exit ;; + exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; + exit 0;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp - exit ;; + exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then @@ -308,32 +347,32 @@ else echo pyramid-pyramid-bsd fi - exit ;; + exit 0 ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 - exit ;; + exit 0 ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; + sparc) echo sparc-icl-nx7 && exit 0 ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; + exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; + exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; + exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; + exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) @@ -342,10 +381,10 @@ esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; + exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; + exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 @@ -357,10 +396,10 @@ echo sparc-sun-sunos${UNAME_RELEASE} ;; esac - exit ;; + exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; + exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -371,40 +410,40 @@ # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit ;; + exit 0 ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit ;; + exit 0 ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit ;; + exit 0 ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} - exit ;; + exit 0 ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} - exit ;; + exit 0 ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; + exit 0 ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} - exit ;; + exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; + exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 - exit ;; + exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; + exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; + exit 0 ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; + exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -428,33 +467,32 @@ exit (-1); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && exit 0 echo mips-mips-riscos${UNAME_RELEASE} - exit ;; + exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax - exit ;; + exit 0 ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax - exit ;; + exit 0 ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax - exit ;; + exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix - exit ;; + exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 - exit ;; + exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 - exit ;; + exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 - exit ;; + exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` @@ -470,29 +508,29 @@ else echo i586-dg-dgux${UNAME_RELEASE} fi - exit ;; + exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 - exit ;; + exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 - exit ;; + exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 - exit ;; + exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd - exit ;; + exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; + exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix - exit ;; + exit 0 ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` @@ -500,7 +538,7 @@ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; + exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build @@ -515,18 +553,14 @@ exit(0); } EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi - exit ;; + exit 0 ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then @@ -540,28 +574,28 @@ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; + exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix - exit ;; + exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 - exit ;; + exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 + exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx - exit ;; + exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 - exit ;; + exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd - exit ;; + exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 - exit ;; + exit 0 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in @@ -623,19 +657,9 @@ esac if [ ${HP_ARCH} = "hppa2.0w" ] then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else @@ -643,11 +667,11 @@ fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; + exit 0 ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} - exit ;; + exit 0 ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -675,166 +699,163 @@ exit (0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo unknown-hitachi-hiuxwe2 - exit ;; + exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd - exit ;; + exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd - exit ;; + exit 0 ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix - exit ;; + exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf - exit ;; + exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf - exit ;; + exit 0 ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi - exit ;; + exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites - exit ;; + exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit ;; + exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit ;; + exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit ;; + exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit ;; + exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit ;; + exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; + exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' - exit ;; + exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; + exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; + exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; + exit 0 ;; *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; + echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; + exit 0 ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; + exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; + exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; + exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; + exit 0 ;; *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; + # Determine whether the default compiler uses glibc. + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #if __GLIBC__ >= 2 + LIBC=gnu + #else + LIBC= + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + # GNU/KFreeBSD systems have a "k" prefix to indicate we are using + # FreeBSD's kernel, but not the complete OS. + case ${LIBC} in gnu) kernel_only='k' ;; esac + echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} + exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin - exit ;; + exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; + exit 0 ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 - exit ;; + exit 0 ;; x86:Interix*:[34]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit ;; + exit 0 ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks - exit ;; + exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix - exit ;; + exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; + exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin - exit ;; + exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; + exit 0 ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; + exit 0 ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; + exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix - exit ;; + exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; + exit 0 ;; cris:Linux:*:*) echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; + exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; + exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; + exit 0 ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -852,7 +873,7 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; mips64:Linux:*:*) eval $set_cc_for_build @@ -871,14 +892,14 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu - exit ;; + exit 0 ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu - exit ;; + exit 0 ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; @@ -892,7 +913,7 @@ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; + exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in @@ -900,25 +921,25 @@ PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac - exit ;; + exit 0 ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu - exit ;; + exit 0 ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux - exit ;; + exit 0 ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; + exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; + exit 0 ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; + exit 0 ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu - exit ;; + exit 0 ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -936,15 +957,15 @@ ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; + exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; + exit 0 ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; + exit 0 ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build @@ -972,18 +993,15 @@ #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 - exit ;; + exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... @@ -991,27 +1009,27 @@ # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; + exit 0 ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; + exit 0 ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop - exit ;; + exit 0 ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) + exit 0 ;; + i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable - exit ;; + exit 0 ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; + exit 0 ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; + exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -1019,16 +1037,15 @@ else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. + exit 0 ;; + i*86:*:5:[78]*) case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; + exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` @@ -1046,73 +1063,73 @@ else echo ${UNAME_MACHINE}-pc-sysv32 fi - exit ;; + exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp - exit ;; + exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 - exit ;; + exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 - exit ;; + exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi - exit ;; + exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv - exit ;; + exit 0 ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv - exit ;; + exit 0 ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; + && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; + exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 - exit ;; + exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; + exit 0 ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; + exit 0 ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; + exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} - exit ;; + exit 0 ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 - exit ;; + exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 - exit ;; + exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` @@ -1120,73 +1137,68 @@ else echo ns32k-sni-sysv fi - exit ;; + exit 0 ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says <Richard.M.Bartel@ccMail.Census.GOV> echo i586-unisys-sysv4 - exit ;; + exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes <hewes@openmarket.com>. # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 - exit ;; + exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; + exit 0 ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos - exit ;; + exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} - exit ;; + exit 0 ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 - exit ;; + exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi - exit ;; + exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos - exit ;; + exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos - exit ;; + exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos - exit ;; + exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} - exit ;; + exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} - exit ;; + exit 0 ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} - exit ;; + exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; + exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; + exit 0 ;; *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in + case `uname -p` in *86) UNAME_PROCESSOR=i686 ;; - unknown) UNAME_PROCESSOR=powerpc ;; + powerpc) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; + exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then @@ -1194,25 +1206,22 @@ UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; + exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; + exit 0 ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; + exit 0 ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux - exit ;; + exit 0 ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv - exit ;; + exit 0 ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; + exit 0 ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 @@ -1223,44 +1232,31 @@ UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; + exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 - exit ;; + exit 0 ;; *:TENEX:*:*) echo pdp10-unknown-tenex - exit ;; + exit 0 ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 - exit ;; + exit 0 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 - exit ;; + exit 0 ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 - exit ;; + exit 0 ;; *:ITS:*:*) echo pdp10-unknown-its - exit ;; + exit 0 ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} - exit ;; + exit 0 ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; + exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1292,7 +1288,7 @@ #endif #if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); + printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) @@ -1381,12 +1377,11 @@ } EOF -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 # Apollos put the system type in the environment. -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) @@ -1395,22 +1390,22 @@ case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd - exit ;; + exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit ;; + exit 0 ;; c34*) echo c34-convex-bsd - exit ;; + exit 0 ;; c38*) echo c38-convex-bsd - exit ;; + exit 0 ;; c4*) echo c4-convex-bsd - exit ;; + exit 0 ;; esac fi @@ -1421,9 +1416,7 @@ the operating system you are using. It is advised that you download the most up to date version of the config scripts from - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.gues... -and - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + ftp://ftp.gnu.org/pub/gnu/config/ If the version you run ($0) is already up to date, please send the following data and any information you think might be Modified: freeswitch/branches/cypromis/trunk/build/config/config.sub ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/config.sub (original) +++ freeswitch/branches/cypromis/trunk/build/config/config.sub Fri Apr 14 04:25:32 2006 @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -timestamp='2005-07-08' +timestamp='2004-02-23' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -21,15 +21,14 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. - # Please send patches to <config-patches@gnu.org>. Submit a context # diff and a properly formatted ChangeLog entry. # @@ -71,7 +70,7 @@ version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -84,11 +83,11 @@ while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; + echo "$timestamp" ; exit 0 ;; --version | -v ) - echo "$version" ; exit ;; + echo "$version" ; exit 0 ;; --help | --h* | -h ) - echo "$usage"; exit ;; + echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -100,7 +99,7 @@ *local*) # First pass through any local machine types. echo $1 - exit ;; + exit 0;; * ) break ;; @@ -146,7 +145,7 @@ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) + -apple | -axis) os= basic_machine=$1 ;; @@ -232,14 +231,13 @@ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ - | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ + | m32r | m68000 | m68k | m88k | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -248,7 +246,6 @@ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ @@ -257,28 +254,23 @@ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ - | ms1 \ | msp430 \ | ns16k | ns32k \ - | or32 \ + | openrisc | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ - | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ + | x86 | xscale | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; - m32c) - basic_machine=$basic_machine-unknown - ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown @@ -306,9 +298,9 @@ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ - | bfin-* | bs2000-* \ + | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ + | clipper-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ @@ -316,9 +308,9 @@ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ - | m32r-* | m32rle-* \ + | m32r-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ + | m88110-* | m88k-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ @@ -327,7 +319,6 @@ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ @@ -335,32 +326,27 @@ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | ms1-* \ | msp430-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ + | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ | ymp-* \ | z8k-*) ;; - m32c-*) - ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) @@ -459,10 +445,6 @@ basic_machine=j90-cray os=-unicos ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; cr16c) basic_machine=cr16c-unknown os=-elf @@ -470,9 +452,6 @@ crds | unos) basic_machine=m68k-crds ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; @@ -502,10 +481,6 @@ basic_machine=m88k-motorola os=-sysv3 ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx @@ -684,6 +659,10 @@ mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; monitor) basic_machine=m68k-rom68k os=-coff @@ -764,6 +743,10 @@ np1) basic_machine=np1-gould ;; + nv1) + basic_machine=nv1-cray + os=-unicosmp + ;; nsr-tandem) basic_machine=nsr-tandem ;; @@ -771,8 +754,9 @@ basic_machine=hppa1.1-oki os=-proelf ;; - openrisc | openrisc-*) + or32 | or32-*) basic_machine=or32-unknown + os=-coff ;; os400) basic_machine=powerpc-ibm @@ -1045,10 +1029,6 @@ basic_machine=hppa1.1-winbond os=-proelf ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; xps | xps100) basic_machine=xps100-honeywell ;; @@ -1079,9 +1059,6 @@ romp) basic_machine=romp-ibm ;; - mmix) - basic_machine=mmix-knuth - ;; rs6000) basic_machine=rs6000-ibm ;; @@ -1098,10 +1075,13 @@ we32k) basic_machine=we32k-att ;; - sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sparc | sparcv8 | sparcv9 | sparcv9b) + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) @@ -1187,8 +1167,7 @@ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku*) + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1206,7 +1185,7 @@ os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) @@ -1315,9 +1294,6 @@ -kaos*) os=-kaos ;; - -zvmoe) - os=-zvmoe - ;; -none) ;; *) @@ -1395,15 +1371,9 @@ *-be) os=-beos ;; - *-haiku) - os=-haiku - ;; *-ibm) os=-aix ;; - *-knuth) - os=-mmixware - ;; *-wec) os=-proelf ;; @@ -1569,7 +1539,7 @@ esac echo $basic_machine$os -exit +exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) Modified: freeswitch/branches/cypromis/trunk/build/config/depcomp ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/depcomp (original) +++ freeswitch/branches/cypromis/trunk/build/config/depcomp Fri Apr 14 04:25:32 2006 @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2005-07-09.11 +scriptversion=2003-11-08.23 -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,8 +17,8 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -43,18 +43,17 @@ depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to <bug-automake@gnu.org>. EOF - exit $? + exit 0 ;; -v | --v*) echo "depcomp $scriptversion" - exit $? + exit 0 ;; esac @@ -62,10 +61,18 @@ echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi +# `libtool' can also be set to `yes' or `no'. -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +if test -z "$depfile"; then + base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` + dir=`echo "$object" | sed 's,/.*$,/,'` + if test "$dir" = "$object"; then + dir= + fi + # FIXME: should be _deps on DOS. + depfile="$dir.deps/$base" +fi + tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" @@ -287,43 +294,27 @@ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + tmpdepfile1="$dir.libs/$base.lo.d" + tmpdepfile2="$dir.libs/$base.d" "$@" -Wc,-MD else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d + tmpdepfile1="$dir$base.o.d" + tmpdepfile2="$dir$base.d" "$@" -MD fi stat=$? if test $stat -eq 0; then : else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + else + tmpdepfile="$tmpdepfile2" + fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. @@ -467,8 +458,7 @@ done "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" Modified: freeswitch/branches/cypromis/trunk/build/config/install-sh ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/install-sh (original) +++ freeswitch/branches/cypromis/trunk/build/config/install-sh Fri Apr 14 04:25:32 2006 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2005-05-14.22 +scriptversion=2004-02-15.20 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -58,6 +58,9 @@ rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" +transformbasename= +transform_arg= +instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= @@ -67,27 +70,23 @@ src= dst= dir_arg= -dstarg= -no_target_directory= -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE +usage="Usage: $0 [OPTION]... SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... + or: $0 -d DIRECTORIES... -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. +In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. +In the second, create the directory path DIR. Options: --c (ignored) +-b=TRANSFORMBASENAME +-c copy source (using $cpprog) instead of moving (using $mvprog). -d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. +-g GROUP $chgrp installed files to GROUP. +-m MODE $chmod installed files to MODE. +-o USER $chown installed files to USER. +-s strip installed files (using $stripprog). +-t=TRANSFORM --help display this help and exit. --version display version info and exit. @@ -97,9 +96,14 @@ while test -n "$1"; do case $1 in - -c) shift + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift continue;; + -c) instcmd=$cpprog + shift + continue;; + -d) dir_arg=true shift continue;; @@ -109,7 +113,7 @@ shift continue;; - --help) echo "$usage"; exit $?;; + --help) echo "$usage"; exit 0;; -m) chmodcmd="$chmodprog $2" shift @@ -125,20 +129,14 @@ shift continue;; - -t) dstarg=$2 - shift - shift - continue;; + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; - -T) no_target_directory=true - shift - continue;; + --version) echo "$0 $scriptversion"; exit 0;; - --version) echo "$0 $scriptversion"; exit $?;; - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break + test -n "$dir_arg" && break # Otherwise, the last argument is the destination. Remove it from $@. for arg do @@ -176,13 +174,13 @@ src= if test -d "$dst"; then - mkdircmd=: + instcmd=: chmodcmd= else - mkdircmd=$mkdirprog + instcmd=$mkdirprog fi else - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then @@ -204,16 +202,12 @@ # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi dst=$dst/`basename "$src"` fi fi # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. @@ -226,8 +220,7 @@ oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` IFS=$oIFS pathcomp= @@ -236,83 +229,83 @@ pathcomp=$pathcomp$1 shift if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" + $mkdirprog "$pathcomp" || lasterr=$? # mkdir can fail with a `File exist' error in case several # install-sh are creating the directory concurrently. This # is OK. - test -d "$pathcomp" || exit + test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; } fi pathcomp=$pathcomp/ done fi if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ + $doit $instcmd "$dst" \ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } else - dstfile=`basename "$dst"` + # If we're going to rename the final executable, determine the name now. + if test -z "$transformarg"; then + dstfile=`basename "$dst"` + else + dstfile=`basename "$dst" $transformbasename \ + | sed $transformarg`$transformbasename + fi + # don't allow the sed command to completely eliminate the filename. + test -z "$dstfile" && dstfile=`basename "$dst"` + # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 trap '(exit $?); exit' 1 2 13 15 - # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + # Move or copy the file name to the temp name + $doit $instcmd "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. + # errors from the above "$doit $instcmd $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. + # Now remove or move aside any old file at destination location. We + # try this two ways since rm can't unlink itself on some systems and + # the destination file might be busy for other reasons. In this case, + # the final cleanup might fail but the new file should still install + # successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + fi || { (exit 1); exit; } done # The final little trick to "correctly" pass the exit status to the exit trap. { - (exit 0); exit 0 + (exit 0); exit } # Local variables: Modified: freeswitch/branches/cypromis/trunk/build/config/ltmain.sh ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/ltmain.sh (original) +++ freeswitch/branches/cypromis/trunk/build/config/ltmain.sh Fri Apr 14 04:25:32 2006 @@ -1,7 +1,7 @@ # ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 # @@ -17,41 +17,13 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -basename="s,^.*/,,g" - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.5.20 -TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)" - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes. -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. @@ -64,7 +36,7 @@ : else # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} + exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then @@ -73,9 +45,19 @@ cat <<EOF $* EOF - exit $EXIT_SUCCESS + exit 0 fi +# The name of this program. +progname=`$echo "$0" | ${SED} 's%^.*/%%'` +modename="$progname" + +# Constants. +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5.2 +TIMESTAMP=" (1.1220.2.60 2004/01/25 12:25:08)" + default_mode= help="Try \`$progname --help' for more information." magic="%%%MAGIC variable%%%" @@ -88,15 +70,14 @@ Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' # test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - SP2NL='tr \040 \012' - NL2SP='tr \015\012 \040\040' +case `echo A|tr A '\301'` in + A) # EBCDIC based system + SP2NL="tr '\100' '\n'" + NL2SP="tr '\r\n' '\100\100'" ;; - *) # EBCDIC based system - SP2NL='tr \100 \n' - NL2SP='tr \r\n \100\100' + *) # Assume ASCII based system + SP2NL="tr '\040' '\012'" + NL2SP="tr '\015\012' '\040\040'" ;; esac @@ -113,14 +94,13 @@ fi # Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" +: ${IFS=" +"} if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then $echo "$modename: not configured to build any kind of library" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Global variables. @@ -139,14 +119,10 @@ # Shell function definitions: # This seems to be the best place for them -# func_win32_libid arg -# return the library type of file 'arg' -# # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. -func_win32_libid () -{ +win32_libid () { win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in @@ -155,7 +131,7 @@ ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | \ sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` if test "X$win32_nmres" = "Ximport" ; then @@ -165,7 +141,7 @@ fi fi ;; - *DLL*) + *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... @@ -179,179 +155,9 @@ $echo $win32_libid_type } - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case "$@ " in - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi -} - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - - $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" - $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 - exit $EXIT_FAILURE - fi -} - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - my_status="" - - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status - fi - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xdir="$my_gentop/$my_xlib" - - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$my_xdir"; then - exit $status - fi - case $host in - *-darwin*) - $show "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - if test -z "$run"; then - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - lipo -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - ${rm}r unfat-$$ - cd "$darwin_orig_dir" - else - cd "$darwin_orig_dir" - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - fi # $run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - func_extract_archives_result="$my_oldobjs" -} # End of Shell function definitions ##################################### -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" - # Parse our command line options once, thoroughly. while test "$#" -gt 0 do @@ -377,7 +183,7 @@ case $tagname in *[!-_A-Za-z0-9,/]*) $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -387,10 +193,10 @@ # not specially marked. ;; *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then taglist="$taglist $tagname" # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" else $echo "$progname: ignoring unknown tag $tagname" 1>&2 fi @@ -416,19 +222,19 @@ --version) $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" $echo - $echo "Copyright (C) 2005 Free Software Foundation, Inc." + $echo "Copyright (C) 2003 Free Software Foundation, Inc." $echo "This is free software; see the source for copying conditions. There is NO" $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $? + exit 0 ;; --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 # Now print the configurations for the tags. for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" done - exit $? + exit 0 ;; --debug) @@ -453,7 +259,7 @@ else $echo "disable static libraries" fi - exit $? + exit 0 ;; --finish) mode="finish" ;; @@ -484,7 +290,7 @@ -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; *) @@ -497,7 +303,7 @@ if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # If this variable is set in any of the actions, the command in it @@ -510,7 +316,7 @@ # Infer the operation mode. if test -z "$mode"; then $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 case $nonopt in *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link @@ -553,7 +359,7 @@ if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Change the help message to a mode-specific one. @@ -576,7 +382,7 @@ for arg do - case $arg_mode in + case "$arg_mode" in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" @@ -595,7 +401,7 @@ -o) if test -n "$libobj" ; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE + exit 1 fi arg_mode=target continue @@ -620,7 +426,7 @@ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' - for arg in $args; do + for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. @@ -658,10 +464,7 @@ case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly - # in scan sets, and some SunOS ksh mistreat backslash-escaping - # in scan sets (worked around with variable expansion), - # and furthermore cannot handle '|' '&' '(' ')' in scan sets - # at all, so we specify them separately. + # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; @@ -673,11 +476,11 @@ case $arg_mode in arg) $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE + exit 1 ;; target) $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; *) # Get the name of the library object. @@ -710,11 +513,50 @@ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac - func_infer_tag $base_compile + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. + # Only attempt this if the compiler in the base compile + # command doesn't match the default compiler. + if test -n "$available_tags" && test -z "$tagname"; then + case $base_compile in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" + case "$base_compile " in + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit 1 +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi for arg in $later; do case $arg in @@ -735,14 +577,6 @@ esac done - qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` - case $qlibobj in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qlibobj="\"$qlibobj\"" ;; - esac - test "X$libobj" != "X$qlibobj" \ - && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then @@ -755,7 +589,7 @@ if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Delete any leftover library objects. @@ -766,7 +600,7 @@ fi $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + trap "$run $rm $removelist; exit 1" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in @@ -785,7 +619,7 @@ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + trap "$run $rm $removelist; exit 1" 1 2 15 else output_obj= need_locks=no @@ -795,7 +629,7 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$progpath" "$lockfile" 2>/dev/null; do + until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done @@ -813,19 +647,14 @@ compiler." $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi - $echo "$srcfile" > "$lockfile" + $echo $srcfile > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi - qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` - case $qsrcfile in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qsrcfile="\"$qsrcfile\"" ;; - esac $run $rm "$libobj" "${libobj}T" @@ -847,10 +676,10 @@ fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then - command="$base_compile $qsrcfile $pic_flag" + command="$base_compile $srcfile $pic_flag" else # Don't build PIC code - command="$base_compile $qsrcfile" + command="$base_compile $srcfile" fi if test ! -d "${xdir}$objdir"; then @@ -873,7 +702,7 @@ if $run eval "$command"; then : else test -n "$output_obj" && $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi if test "$need_locks" = warn && @@ -893,7 +722,7 @@ compiler." $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi # Just move the object if needed, then go on to compile the next one @@ -930,9 +759,9 @@ if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code - command="$base_compile $qsrcfile" + command="$base_compile $srcfile" else - command="$base_compile $qsrcfile $pic_flag" + command="$base_compile $srcfile $pic_flag" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" @@ -945,7 +774,7 @@ if $run eval "$command"; then : else $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi if test "$need_locks" = warn && @@ -965,7 +794,7 @@ compiler." $run $rm $removelist - exit $EXIT_FAILURE + exit 1 fi # Just move the object if needed @@ -1003,7 +832,7 @@ $run $rm "$lockfile" fi - exit $EXIT_SUCCESS + exit 0 ;; # libtool link mode @@ -1075,7 +904,46 @@ vinfo= vinfo_number=no - func_infer_tag $base_compile + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. + # Only attempt this if the compiler in the base link + # command doesn't match the default compiler. + if test -n "$available_tags" && test -z "$tagname"; then + case $base_compile in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" + case $base_compile in + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) + # The compiler in $compile_command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit 1 +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi # We need to know -static, to get the right output filenames. for arg @@ -1171,7 +1039,7 @@ export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE + exit 1 fi prev= continue @@ -1223,7 +1091,7 @@ test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Extract subdirectory from the argument. @@ -1276,7 +1144,7 @@ # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE + exit 1 else # Dry-run case. @@ -1297,7 +1165,7 @@ done else $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE + exit 1 fi arg=$save_arg prev= @@ -1309,7 +1177,7 @@ [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac if test "$prev" = rpath; then @@ -1349,18 +1217,6 @@ finalize_command="$finalize_command $qarg" continue ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - darwin_framework) - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - prev= - continue - ;; *) eval "$prev=\"\$arg\"" prev= @@ -1409,7 +1265,7 @@ -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE + exit 1 fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -1419,14 +1275,6 @@ continue ;; - -framework|-arch) - prev=darwin_framework - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; - -inst-prefix-dir) prev=inst_prefix continue @@ -1453,7 +1301,7 @@ absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi dir="$absdir" ;; @@ -1487,7 +1335,7 @@ # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; @@ -1498,7 +1346,7 @@ esac elif test "X$arg" = "X-lc_r"; then case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -1508,20 +1356,8 @@ continue ;; - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - -model) - compile_command="$compile_command $arg" - compiler_flags="$compiler_flags $arg" - finalize_command="$finalize_command $arg" - prev=xcompiler - continue - ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + deplibs="$deplibs $arg" continue ;; @@ -1530,14 +1366,13 @@ continue ;; - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m* pass through architecture-specific compiler args for GCC - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*) - + # gcc -m* arguments should be passed to the linker via $compiler_flags + # in order to pass architecture information to the linker + # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo + # but this is not reliable with gcc because gcc may use -mfoo to + # select a different linker, different libraries, etc, while + # -Wl,-mfoo simply passes -mfoo to the linker. + -m*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` @@ -1617,7 +1452,7 @@ [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac case "$xrpath " in @@ -1740,7 +1575,7 @@ test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Extract subdirectory from the argument. @@ -1793,7 +1628,7 @@ # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE + exit 1 else # Dry-run case. @@ -1860,7 +1695,7 @@ if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then @@ -1904,7 +1739,7 @@ "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -1914,7 +1749,7 @@ case $host in *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps + # don't eliminate duplcations in $postdeps and $predeps duplicate_compiler_generated_deps=yes ;; *) @@ -1967,7 +1802,7 @@ *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac done @@ -2010,7 +1845,7 @@ compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - compiler_flags="$compiler_flags $deplib" + deplibs="$deplib $deplibs" fi continue ;; @@ -2019,9 +1854,13 @@ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - for search_ext in .la $std_shrext .so .a; do + for search_ext in .la $shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then @@ -2097,11 +1936,11 @@ fi if test "$pass" = scan; then deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 @@ -2129,22 +1968,7 @@ fi case $linkmode in lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then + if test "$deplibs_check_method" != pass_all; then $echo $echo "*** Warning: Trying to link with static lib archive $deplib." $echo "*** I have the capability to make that library automatically link in when" @@ -2195,14 +2019,14 @@ if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Check to see that this really is a libtool archive. if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` @@ -2218,9 +2042,7 @@ # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no - avoidtemprpath= - # Read the .la file case $lib in */* | *\\*) . $lib ;; @@ -2240,7 +2062,7 @@ if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" @@ -2257,12 +2079,12 @@ done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE + exit 1 fi continue fi # $pass = conv - + # Get the name of the library we link against. linklib= for l in $old_library $library_names; do @@ -2270,18 +2092,16 @@ done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't @@ -2318,19 +2138,11 @@ dir="$libdir" absdir="$libdir" fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` @@ -2338,7 +2150,7 @@ if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). @@ -2365,7 +2177,7 @@ continue fi - + if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" @@ -2403,12 +2215,12 @@ if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + if test -n "$shlibpath_var"; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $absdir" ;; + *) temp_rpath="$temp_rpath $dir" ;; esac fi @@ -2452,18 +2264,17 @@ need_relink=yes fi # This is a shared library - - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then + + # Warn about portability, can't link against -module's on some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then $echo if test "$linkmode" = prog; then $echo "*** Warning: Linking the executable $output against the loadable module" else $echo "*** Warning: Linking the shared library $output against the loadable module" fi - $echo "*** $linklib is not portable!" - fi + $echo "*** $linklib is not portable!" + fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. @@ -2561,9 +2372,9 @@ case $host in *-*-sco3.2v5* ) add_dir="-L$dir" ;; *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added - if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then + # if the lib is a module then we can not link against it, someone + # is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then $echo "** Warning, lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $echo @@ -2571,7 +2382,7 @@ $echo "** The link will probably fail, sorry" else add="$dir/$old_library" - fi + fi fi esac elif test "$hardcode_minus_L" = no; then @@ -2594,7 +2405,7 @@ add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then - case $libdir in + case "$libdir" in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; @@ -2613,7 +2424,7 @@ if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE + exit 1 fi if test -n "$add_shlibpath"; then @@ -2656,8 +2467,7 @@ esac add="-l$name" elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then + if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" @@ -2667,7 +2477,7 @@ add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then - case $libdir in + case "$libdir" in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; @@ -2728,6 +2538,8 @@ fi fi else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi @@ -2735,8 +2547,7 @@ if test "$linkmode" = lib; then if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || + { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= @@ -2793,7 +2604,7 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 @@ -2803,8 +2614,7 @@ depdepl= case $host in *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared + # we do not want to link against static libs, but need to link against shared eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do @@ -2812,7 +2622,7 @@ done if test -f "$path/$depdepl" ; then depdepl="$path/$depdepl" - fi + fi # do not add paths which are already there case " $newlib_search_path " in *" $path "*) ;; @@ -2822,36 +2632,37 @@ path="" ;; *) - path="-L$path" - ;; - esac + path="-L$path" ;; - -l*) + esac + + ;; + -l*) case $host in *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" ;; *) continue ;; - esac + esac ;; *) continue ;; esac case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$deplibs $depdepl" ;; + esac + case " $deplibs " in *" $path "*) ;; - *) deplibs="$path $deplibs" ;; + *) deplibs="$deplibs $path" ;; esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; - esac done fi # link_all_deplibs != no fi # linkmode = lib @@ -2937,8 +2748,7 @@ eval $var=\"$tmp_libs\" done # for var fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) + # Last step: remove runtime libs from dependency_libs (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in @@ -2998,19 +2808,19 @@ case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval shared_ext=\"$shrext_cmds\" + eval shared_ext=\"$shrext\" eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval shared_ext=\"$shrext_cmds\" + eval shared_ext=\"$shrext\" eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` @@ -3021,7 +2831,7 @@ if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE + exit 1 else $echo $echo "*** Warning: Linking the shared library $output against the non-libtool" @@ -3069,13 +2879,13 @@ if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible - + case $vinfo_number in yes) number_major="$2" @@ -3115,36 +2925,36 @@ # Check that each of the things are valid numbers. case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) - $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) - $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) - $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Calculate the version variables. @@ -3161,7 +2971,7 @@ versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` - verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) @@ -3233,7 +3043,7 @@ *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -3287,11 +3097,9 @@ *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue fi removelist="$removelist $p" ;; @@ -3367,7 +3175,7 @@ *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; @@ -3417,7 +3225,7 @@ if test "$?" -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do - name=`expr $i : '-l\(.*\)'` + name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" -ne "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3454,7 +3262,7 @@ # Error occurred in the first compile. Let's try to salvage # the situation: Compile a separate program for each library. for i in $deplibs; do - name=`expr $i : '-l\(.*\)'` + name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then $rm conftest @@ -3506,7 +3314,7 @@ set dummy $deplibs_check_method file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` + name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3575,7 +3383,7 @@ set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` + name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -3772,7 +3580,7 @@ fi # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" + eval shared_ext=\"$shrext\" eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" @@ -3816,9 +3624,6 @@ # The command line is too long to execute in one step. $show "using reloadable object file for export list..." skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break fi done IFS="$save_ifs" @@ -3839,12 +3644,12 @@ for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; - *) + *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done - deplibs="$tmp_deplibs" + deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then @@ -3852,13 +3657,67 @@ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi generated="$generated $gentop" - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done fi fi - + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" @@ -3888,8 +3747,7 @@ fi fi - if test "X$skipped_export" != "X:" && - len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else @@ -3908,7 +3766,6 @@ save_libobjs=$libobjs fi save_output=$output - output_la=`$echo "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. @@ -3918,13 +3775,13 @@ delfiles= last_robj= k=1 - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$save_output-${k}.$objext # Loop over the list of objects to be linked. for obj in $save_libobjs do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + { len=`expr "X$test_cmds" : ".*"` && test "$len" -le "$max_cmd_len"; }; then objlist="$objlist $obj" else @@ -3938,9 +3795,9 @@ # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi - last_robj=$output_objdir/$output_la-${k}.$objext + last_robj=$output_objdir/$save_output-${k}.$objext k=`expr $k + 1` - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$save_output-${k}.$objext objlist=$obj len=1 fi @@ -3960,13 +3817,13 @@ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" fi - # Set up a command to remove the reloadable object files + # Set up a command to remove the reloadale object files # after they are used. i=0 while test "$i" -lt "$k" do i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" done $echo "creating a temporary reloadable object file: $output" @@ -3975,6 +3832,7 @@ save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" + eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done @@ -4014,31 +3872,14 @@ IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi - - exit $lt_exit - } + $run eval "$cmd" || exit $? done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - fi - fi - - exit $EXIT_SUCCESS + exit 0 fi # Create links to the real library. @@ -4086,7 +3927,7 @@ *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE + exit 1 fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` @@ -4115,10 +3956,64 @@ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi generated="$generated $gentop" - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done fi fi @@ -4143,7 +4038,7 @@ $run ${rm}r $gentop fi - exit $EXIT_SUCCESS + exit 0 fi if test "$build_libtool_libs" != yes; then @@ -4156,7 +4051,7 @@ # accidentally link it into a program. # $show "echo timestamp > $libobj" # $run eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS + exit 0 fi if test -n "$pic_flag" || test "$pic_mode" != default; then @@ -4179,7 +4074,7 @@ $run ${rm}r $gentop fi - exit $EXIT_SUCCESS + exit 0 ;; prog) @@ -4380,12 +4275,12 @@ # Prepare the list of exported symbols if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" + export_symbols="$output_objdir/$output.exp" $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else - $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi fi @@ -4437,26 +4332,7 @@ #endif /* The mapping between symbol names and symbols. */ -" - - case $host in - *cygwin* | *mingw* ) - $echo >> "$output_objdir/$dlsyms" "\ -/* DATA imports from DLLs on WIN32 can't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs */ -struct { -" - ;; - * ) - $echo >> "$output_objdir/$dlsyms" "\ const struct { -" - ;; - esac - - - $echo >> "$output_objdir/$dlsyms" "\ const char *name; lt_ptr address; } @@ -4516,7 +4392,7 @@ ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac else @@ -4604,7 +4480,7 @@ # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? - exit $EXIT_SUCCESS + exit 0 fi if test "$hardcode_action" = relink; then @@ -4659,10 +4535,10 @@ fi # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case $0 in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else @@ -4685,10 +4561,10 @@ esac case $host in *cygwin* | *mingw* ) - cwrappersource=`$echo ${objdir}/lt-${outputname}.c` + cwrappersource=`$echo ${objdir}/lt-${output}.c` cwrapper=`$echo ${output}.exe` $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15 cat > $cwrappersource <<EOF @@ -4697,7 +4573,7 @@ The $output program cannot be directly executed until all the libtool libraries that it depends on are installed. - + This wrapper executable should never be moved out of the build directory. If it is, it will not operate correctly. @@ -4729,7 +4605,7 @@ #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) #define HAVE_DOS_BASED_FILE_SYSTEM -#ifndef DIR_SEPARATOR_2 +#ifndef DIR_SEPARATOR_2 #define DIR_SEPARATOR_2 '\\' #endif #endif @@ -4760,7 +4636,7 @@ { char **newargz; int i; - + program_name = (char *) xstrdup ((char *) basename (argv[0])); newargz = XMALLOC(char *, argc+2); EOF @@ -4773,7 +4649,7 @@ newargz[1] = fnqualify(argv[0]); /* we know the script has the same name, without the .exe */ /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); + strendzap(newargz[1],".exe"); for (i = 1; i < argc; i++) newargz[i+1] = xstrdup(argv[i]); newargz[argc+1] = NULL; @@ -4784,7 +4660,6 @@ EOF cat >> $cwrappersource <<"EOF" - return 127; } void * @@ -4797,7 +4672,7 @@ return p; } -char * +char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL @@ -4811,7 +4686,7 @@ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha (name[0]) && name[1] == ':') + if (isalpha (name[0]) && name[1] == ':') name += 2; #endif @@ -4821,7 +4696,7 @@ return (char *) base; } -char * +char * fnqualify(const char *path) { size_t size; @@ -4849,7 +4724,7 @@ } char * -strendzap(char *str, const char *pat) +strendzap(char *str, const char *pat) { size_t len, patlen; @@ -4869,7 +4744,7 @@ } static void -lt_error_core (int exit_status, const char * mode, +lt_error_core (int exit_status, const char * mode, const char * message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); @@ -4898,7 +4773,7 @@ ;; esac $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + trap "$rm $output; exit 1" 1 2 15 $echo > $output "\ #! $SHELL @@ -4919,7 +4794,7 @@ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi relink_command=\"$relink_command\" @@ -4998,7 +4873,7 @@ else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE + exit 1 fi fi @@ -5048,32 +4923,32 @@ # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} + exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; *) $echo >> $output "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} + exec \$progdir/\$program \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit $EXIT_FAILURE + exit 1 fi else # The program doesn't exist. - \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi\ " chmod +x $output fi - exit $EXIT_SUCCESS + exit 0 ;; esac @@ -5096,73 +4971,71 @@ if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi generated="$generated $gentop" - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - $echo "X$obj" | $Xsed -e 's%^.*/%%' - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "copying selected object files to avoid basename conflicts..." - - if test -z "$gentop"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - fi - - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - counter=`expr $counter + 1` - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - $run ln "$obj" "$gentop/$newobj" || - $run cp "$obj" "$gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done - fi - eval cmds=\"$old_archive_cmds\" if len=`expr "X$cmds" : ".*"` && @@ -5176,18 +5049,31 @@ objlist= concat_cmds= save_oldobjs=$oldobjs - + # GNU ar 2.10+ was changed to match POSIX; thus no paths are + # encoded into archives. This makes 'ar r' malfunction in + # this piecewise linking case whenever conflicting object + # names appear in distinct ar calls; check, warn and compensate. + if (for obj in $save_oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 + $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 + AR_FLAGS=cq + fi # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj - done + done for obj in $save_oldobjs do oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + if len=`expr "X$test_cmds" : ".*"` && test "$len" -le "$max_cmd_len"; then : else @@ -5195,7 +5081,7 @@ oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB - fi + fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= @@ -5244,13 +5130,11 @@ fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command="(cd `pwd`; $SHELL $0 $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then - relink_command= - fi - - + relink_command= + fi # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do @@ -5268,7 +5152,7 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi newdependency_libs="$newdependency_libs $libdir/$name" ;; @@ -5282,7 +5166,7 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi newdlfiles="$newdlfiles $libdir/$name" done @@ -5293,7 +5177,7 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + exit 1 fi newdlprefiles="$newdlprefiles $libdir/$name" done @@ -5301,7 +5185,7 @@ else newdlfiles= for lib in $dlfiles; do - case $lib in + case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac @@ -5310,7 +5194,7 @@ dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do - case $lib in + case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac @@ -5373,7 +5257,7 @@ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac - exit $EXIT_SUCCESS + exit 0 ;; # libtool install mode @@ -5384,11 +5268,11 @@ # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | grep shtool > /dev/null; then + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac @@ -5397,14 +5281,14 @@ shift else install_prog= - arg=$nonopt + arg="$nonopt" fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac @@ -5422,31 +5306,28 @@ do if test -n "$dest"; then files="$files $dest" - dest=$arg + dest="$arg" continue fi case $arg in -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) prev=$arg ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; -s) stripme=" -s" continue ;; - -*) - ;; + -*) ;; + *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else - dest=$arg + dest="$arg" continue fi ;; @@ -5455,7 +5336,7 @@ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac @@ -5465,13 +5346,13 @@ if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test -z "$files"; then @@ -5481,7 +5362,7 @@ $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Strip any trailing slash from the destination. @@ -5502,7 +5383,7 @@ if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi case $destdir in @@ -5514,7 +5395,7 @@ *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac done @@ -5543,7 +5424,7 @@ else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi library_names= @@ -5585,7 +5466,7 @@ # but it's something to keep an eye on. if test "$inst_prefix_dir" = "$destdir"; then $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE + exit 1 fi if test -n "$inst_prefix_dir"; then @@ -5600,7 +5481,7 @@ if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi @@ -5624,14 +5505,11 @@ if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then - $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" fi done fi @@ -5644,16 +5522,7 @@ IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi - - exit $lt_exit - } + $run eval "$cmd" || exit $? done IFS="$save_ifs" fi @@ -5691,7 +5560,7 @@ *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac @@ -5709,7 +5578,7 @@ $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi - exit $EXIT_SUCCESS + exit 0 ;; *) @@ -5747,21 +5616,23 @@ notinst_deplibs= relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi finalize=yes @@ -5783,15 +5654,17 @@ done relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; esac outputname= @@ -5800,12 +5673,8 @@ tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" tmpdir="$tmpdir/libtool-$$" - save_umask=`umask` - umask 0077 - if $mkdir "$tmpdir"; then - umask $save_umask + if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then : else - umask $save_umask $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi @@ -5832,7 +5701,7 @@ fi # remove .exe since cygwin /usr/bin/install will append another - # one anyway + # one anyways case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in @@ -5888,9 +5757,9 @@ if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + exec_cmd='$SHELL $0 $preserve_args --finish$current_libdirs' else - exit $EXIT_SUCCESS + exit 0 fi ;; @@ -5930,7 +5799,7 @@ fi # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS + test "$show" = : && exit 0 $echo "----------------------------------------------------------------------" $echo "Libraries have been installed in:" @@ -5966,7 +5835,7 @@ $echo "See any operating system documentation about shared libraries for" $echo "more information, such as the ld(1) and ld.so(8) manual pages." $echo "----------------------------------------------------------------------" - exit $EXIT_SUCCESS + exit 0 ;; # libtool execute mode @@ -5978,7 +5847,7 @@ if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" - exit $EXIT_FAILURE + exit 1 fi # Handle -dlopen flags immediately. @@ -5986,7 +5855,7 @@ if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi dir= @@ -5997,7 +5866,7 @@ else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi # Read the libtool library. @@ -6024,7 +5893,7 @@ dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE + exit 1 fi ;; @@ -6104,7 +5973,7 @@ $echo "export $shlibpath_var" fi $echo "$cmd$args" - exit $EXIT_SUCCESS + exit 0 fi ;; @@ -6132,7 +6001,7 @@ if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi rmdirs= @@ -6246,7 +6115,7 @@ if test "$mode" = clean ; then noexename=$name case $file in - *.exe) + *.exe) file=`$echo $file|${SED} 's,.exe$,,'` noexename=`$echo $name|${SED} 's,.exe$,,'` # $file with .exe has already been added to rmfiles, @@ -6291,20 +6160,20 @@ "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE + exit 1 fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd - exit $EXIT_FAILURE + exit 1 fi # We need to display help for each of the modes. @@ -6340,7 +6209,7 @@ a more detailed description of MODE. Report bugs to <bug-libtool@gnu.org>." - exit $EXIT_SUCCESS + exit 0 ;; clean) @@ -6495,14 +6364,14 @@ *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 - exit $EXIT_FAILURE + exit 1 ;; esac $echo $echo "Try \`$modename --help' for more information about other modes." -exit $? +exit 0 # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting Modified: freeswitch/branches/cypromis/trunk/build/config/missing ============================================================================== --- freeswitch/branches/cypromis/trunk/build/config/missing (original) +++ freeswitch/branches/cypromis/trunk/build/config/missing Fri Apr 14 04:25:32 2006 @@ -1,9 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2003-09-02.23 -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. @@ -19,8 +19,8 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -60,7 +60,12 @@ msg="probably too old" fi ;; +esac +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... @@ -87,12 +92,10 @@ yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to <bug-automake@gnu.org>." - exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" - exit $? ;; -*) @@ -101,42 +104,12 @@ exit 1 ;; -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) + aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 fi - ;; -esac -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want @@ -146,6 +119,11 @@ ;; autoconf) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -155,6 +133,11 @@ ;; autoheader) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -174,6 +157,11 @@ ;; automake*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. @@ -185,6 +173,11 @@ ;; autom4te) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -261,6 +254,11 @@ ;; help2man) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the @@ -281,6 +279,11 @@ ;; makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -288,23 +291,20 @@ call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 touch $file ;; tar) shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error Modified: freeswitch/branches/cypromis/trunk/configure ============================================================================== --- freeswitch/branches/cypromis/trunk/configure (original) +++ freeswitch/branches/cypromis/trunk/configure Fri Apr 14 04:25:32 2006 @@ -20589,11 +20589,16 @@ fi ;; x86_64-unknown-linux-gnu) - new_AM_CFLAGS="${CFLAGS} -fpic" + new_AM_CFLAGS="${CFLAGS} -fPIC" new_AM_LDFLAGS="" new_SOLINK="-shared -Xlinker -x" new_DYNAMIC_LIB_EXTEN=so - + ;; + i*6-unknown-linux-gnu) + new_AM_CFLAGS="${CFLAGS} -fpic" + new_AM_LDFLAGS="" + new_SOLINK="-shared -Xlinker -x" + new_DYNAMIC_LIB_EXTEN=so ;; esac Modified: freeswitch/branches/cypromis/trunk/src/include/switch_am_config.h.in ============================================================================== --- freeswitch/branches/cypromis/trunk/src/include/switch_am_config.h.in (original) +++ freeswitch/branches/cypromis/trunk/src/include/switch_am_config.h.in Fri Apr 14 04:25:32 2006 @@ -1,5 +1,8 @@ /* src/include/switch_am_config.h.in. Generated from configure.in by autoheader. */ +/* Enable extra debugging. */ +#undef DEBUG + /* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'. */ #undef HAVE_DIRENT_H @@ -58,6 +61,9 @@ /* Define to 1 if you have the `vasprintf' function. */ #undef HAVE_VASPRINTF +/* Enable Optimization. */ +#undef OPTIMZER + /* Name of package */ #undef PACKAGE @@ -96,6 +102,9 @@ /* Little Endian */ #undef __BYTE_ORDER + +/* hmmm that has to be done.. */ +#undef __FUNCTION__ /* for the places where it is not defined */ #undef __LITTLE_ENDIAN