mod_callcenter => mod_huntgroup.
Hello, devs, I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up. At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap? Cheers, -- Ali Isik
Why not just use 'Enterprise_originate' to do hunt groups? http://wiki.freeswitch.org/wiki/Freeswitch_IVR_Originate#Enterprise_originat... On Thu, Sep 20, 2012 at 6:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
All right, thanks Vik. I will need to study this and reply again when I understand it better. -- Ali Isik On Thu, Sep 20, 2012 at 4:54 PM, Vik Killa <vipkilla@gmail.com> wrote:
Why not just use 'Enterprise_originate' to do hunt groups? http://wiki.freeswitch.org/wiki/Freeswitch_IVR_Originate#Enterprise_originat...
On Thu, Sep 20, 2012 at 6:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
What would mod_huntgroup do? We have mod_lcr that does lcr based on sql lookups for example... Regards, João Mesquita On Thu, Sep 20, 2012 at 7:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Essentially, it would be a poor man's call center. Imagine that the customer already has a proxy set up and integrated into their systems. They want to be able to set up a scenario such as: When 101 is dialed, (1) Ring 201 (2) If there is no response in 5 seconds, ring 30[0-9] in parallel, but not exactly simultaneously, because the customer does not want the proxy to be flooded. Randomize the list and send out INVITEs with, say, 100ms intervals (this should be settable) (3) If there is no response in 10 seconds, ring 4[0-4][0-9] (quasi-) simultaneously. (4) If there is no response in 10 seconds, go to IVR. The customer wants to be able to ring 50 user agents (quasi-)simultaneously. They don't want to load their proxy unnecessarily and they don't want to confuse/flood the caller's user agent, either. There are other considerations, too, that I don't want to bore you with at this point. :-) I thought a FreeSWITCH b2bua app (such as mod_huntgroup) would fit the bill here. Do you think I could set this up through configuration only? That would be awesome, but the requirements are kind of specific, so I presumed that I would have to roll my own module. Best, -- Ali Isik On Thu, Sep 20, 2012 at 4:55 PM, João Mesquita <jmesquita@freeswitch.org> wrote:
What would mod_huntgroup do? We have mod_lcr that does lcr based on sql lookups for example...
Regards, João Mesquita
On Thu, Sep 20, 2012 at 7:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Check the following channel vars: leg_timeout --> This will timeout a leg only and must be set on [] and not globally call_timeout --> This will set global timeout for the entire originate/bridge but only for ringing state leg_delay_start --> This will delay the leg to start and must be set under [] and not globally With these 3 items, you must be able to do what you need/want. Regards, João Mesquita On Thu, Sep 20, 2012 at 3:34 PM, Ali Işık <fenlisesi@gmail.com> wrote:
Essentially, it would be a poor man's call center. Imagine that the customer already has a proxy set up and integrated into their systems. They want to be able to set up a scenario such as:
When 101 is dialed, (1) Ring 201 (2) If there is no response in 5 seconds, ring 30[0-9] in parallel, but not exactly simultaneously, because the customer does not want the proxy to be flooded. Randomize the list and send out INVITEs with, say, 100ms intervals (this should be settable) (3) If there is no response in 10 seconds, ring 4[0-4][0-9] (quasi-) simultaneously. (4) If there is no response in 10 seconds, go to IVR.
The customer wants to be able to ring 50 user agents (quasi-)simultaneously. They don't want to load their proxy unnecessarily and they don't want to confuse/flood the caller's user agent, either. There are other considerations, too, that I don't want to bore you with at this point. :-)
I thought a FreeSWITCH b2bua app (such as mod_huntgroup) would fit the bill here.
Do you think I could set this up through configuration only? That would be awesome, but the requirements are kind of specific, so I presumed that I would have to roll my own module.
Best,
-- Ali Isik
On Thu, Sep 20, 2012 at 4:55 PM, João Mesquita <jmesquita@freeswitch.org> wrote:
What would mod_huntgroup do? We have mod_lcr that does lcr based on sql lookups for example...
Regards, João Mesquita
On Thu, Sep 20, 2012 at 7:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
On Thu, Sep 20, 2012 at 4:20 PM, João Mesquita <jmesquita@freeswitch.org>wrote:
Check the following channel vars:
leg_timeout --> This will timeout a leg only and must be set on [] and not globally call_timeout --> This will set global timeout for the entire originate/bridge but only for ringing state leg_delay_start --> This will delay the leg to start and must be set under [] and not globally
With these 3 items, you must be able to do what you need/want.
Regards, João Mesquita
+1. Throw in some Lua scripting (or the lang of your choice) and you can build an elegant solution for this. -MC
All right, thank you, João. I will have to set up a little lab here and see what I can get done with these parameters. How about my original question, by the way, about the maturity of mod_callcenter, as you see it, and its place in the roadmap? Best, -- Ali Işık On Fri, Sep 21, 2012 at 2:20 AM, João Mesquita <jmesquita@freeswitch.org> wrote:
Check the following channel vars:
leg_timeout --> This will timeout a leg only and must be set on [] and not globally call_timeout --> This will set global timeout for the entire originate/bridge but only for ringing state leg_delay_start --> This will delay the leg to start and must be set under [] and not globally
With these 3 items, you must be able to do what you need/want.
Regards, João Mesquita
On Thu, Sep 20, 2012 at 3:34 PM, Ali Işık <fenlisesi@gmail.com> wrote:
Essentially, it would be a poor man's call center. Imagine that the customer already has a proxy set up and integrated into their systems. They want to be able to set up a scenario such as:
When 101 is dialed, (1) Ring 201 (2) If there is no response in 5 seconds, ring 30[0-9] in parallel, but not exactly simultaneously, because the customer does not want the proxy to be flooded. Randomize the list and send out INVITEs with, say, 100ms intervals (this should be settable) (3) If there is no response in 10 seconds, ring 4[0-4][0-9] (quasi-) simultaneously. (4) If there is no response in 10 seconds, go to IVR.
The customer wants to be able to ring 50 user agents (quasi-)simultaneously. They don't want to load their proxy unnecessarily and they don't want to confuse/flood the caller's user agent, either. There are other considerations, too, that I don't want to bore you with at this point. :-)
I thought a FreeSWITCH b2bua app (such as mod_huntgroup) would fit the bill here.
Do you think I could set this up through configuration only? That would be awesome, but the requirements are kind of specific, so I presumed that I would have to roll my own module.
Best,
-- Ali Isik
On Thu, Sep 20, 2012 at 4:55 PM, João Mesquita <jmesquita@freeswitch.org> wrote:
What would mod_huntgroup do? We have mod_lcr that does lcr based on sql lookups for example...
Regards, João Mesquita
On Thu, Sep 20, 2012 at 7:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Mod_callcenter is a great module, I'd say it is widely used and still maintained. I put in a feature request a few months ago and it was completed the same day! On Fri, Sep 21, 2012 at 4:27 AM, Ali Işık <fenlisesi@gmail.com> wrote:
All right, thank you, João. I will have to set up a little lab here and see what I can get done with these parameters.
How about my original question, by the way, about the maturity of mod_callcenter, as you see it, and its place in the roadmap?
Best,
-- Ali Işık
On Fri, Sep 21, 2012 at 1:27 AM, Ali Işık <fenlisesi@gmail.com> wrote:
All right, thank you, João. I will have to set up a little lab here and see what I can get done with these parameters.
How about my original question, by the way, about the maturity of mod_callcenter, as you see it, and its place in the roadmap?
Best,
-- Ali Işık
mod_callcenter was donated by a long-time user named Marc-Olivier Chouinard, aka "Moc" on IRC. He's been rather busy lately but I can tell you that he uses it for his customers up in Canada for small and medium-sized call centers. I would say that it is pretty stable and well-documented. A number of people are using it in lieu of mod_fifo. Both mod_callcenter and mod_fifo have the same basic goal: getting inbound calls to agents as quickly as possible and queuing them up while they are waiting. The primary differences are in how they handle the routing/selecting of which call goes to which agent. mod_cc follows a more traditional "ACD-like" approach. mod_fifo is really a "first in, first out" queue that has a bunch of options for customizing how calls get to agents. They both have their place and they both work well, so the big challenge for you is researching them to see which one fits your needs best. -MC
This is great information. Thank you Mike. My butchering/refactoring work could become useful, then, after all. Regards, -- Ali Isik On Fri, Sep 21, 2012 at 8:56 PM, Michael Collins <msc@freeswitch.org> wrote:
On Fri, Sep 21, 2012 at 1:27 AM, Ali Işık <fenlisesi@gmail.com> wrote:
All right, thank you, João. I will have to set up a little lab here and see what I can get done with these parameters.
How about my original question, by the way, about the maturity of mod_callcenter, as you see it, and its place in the roadmap?
Best,
-- Ali Işık
mod_callcenter was donated by a long-time user named Marc-Olivier Chouinard, aka "Moc" on IRC. He's been rather busy lately but I can tell you that he uses it for his customers up in Canada for small and medium-sized call centers. I would say that it is pretty stable and well-documented. A number of people are using it in lieu of mod_fifo. Both mod_callcenter and mod_fifo have the same basic goal: getting inbound calls to agents as quickly as possible and queuing them up while they are waiting. The primary differences are in how they handle the routing/selecting of which call goes to which agent. mod_cc follows a more traditional "ACD-like" approach. mod_fifo is really a "first in, first out" queue that has a bunch of options for customizing how calls get to agents. They both have their place and they both work well, so the big challenge for you is researching them to see which one fits your needs best.
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Ali, Welcome to FreeSWITCH! Glad to have you. The other posts in the thread ask good questions. You may not actually need to create "mod_huntgroup" to accomplish what you need. In fact, I'd wager that you can do a "hunt group" just with a few lines of XML dialplan. Can you describe in plain language how your hunt group module would work? The folks here will offer you some good suggestions on how to proceed. -MC On Thu, Sep 20, 2012 at 3:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
Thank you, Michael. I just fired off a response to João that explains my situation a little. In an effort to understand FreeSWITCH modules, and mod_callcenter in particular, I butchered/refactored mod_callcenter into tiny bits in the last couple of days. I intend to write a test suite to have a good indication that its behaviour is the same as that of mod_callcenter. I will then share it with you and let you decide whether there is any value in it. It is bedtime for me, I have to scoot now. Back in ~10 hours. Cheers, -- Ali Isik On Thu, Sep 20, 2012 at 7:52 PM, Michael Collins <msc@freeswitch.org> wrote:
Ali,
Welcome to FreeSWITCH! Glad to have you.
The other posts in the thread ask good questions. You may not actually need to create "mod_huntgroup" to accomplish what you need. In fact, I'd wager that you can do a "hunt group" just with a few lines of XML dialplan. Can you describe in plain language how your hunt group module would work? The folks here will offer you some good suggestions on how to proceed.
-MC
On Thu, Sep 20, 2012 at 3:15 AM, Ali Işık <fenlisesi@gmail.com> wrote:
Hello, devs,
I am thinking about developing a mod_huntgroup. I am new to FreeSWITCH and would appreciate any help starting up.
At first glance, mod_callcenter seems to have some relevant features. I am trying to decide whether it would make a good starting point. In particular, I would like to know how mod_callcenter is viewed by you guys -- is it widely used, for instance, and actively maintained? Does it have a place in your roadmap?
Cheers,
-- Ali Isik
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
participants (5)
-
Ali Işık
-
Gabriel Gunderson
-
João Mesquita
-
Michael Collins
-
Vik Killa