Hi all, I have downloaded FREESwitch using svn and loaded the .sln into VS 2005. The first thing I notice is that two errors immediately appear: Error 1 Unable to find source file 'D:\Documents and Settings\Jason\My Documents\Visual Studio 2005\Projects\FreeSWITCH\AUTHORS' for file 'AUTHORS', located in '[TARGETDIR]', the file may be absent or locked. D:\Documents and Settings\Jason\My Documents\Visual Studio 2005\Projects\FreeSWITCH\w32\Setup\Setup.vdproj FreeSwitchSetup Error 2 Unable to find source file 'D:\Documents and Settings\Jason\My Documents\Visual Studio 2005\Projects\FreeSWITCH\COPYING' for file 'COPYING', located in '[TARGETDIR]', the file may be absent or locked. D:\Documents and Settings\Jason\My Documents\Visual Studio 2005\Projects\FreeSWITCH\w32\Setup\Setup.vdproj FreeSwitchSetup I then right-click on the Solution and select Build. Unfortunately the first step of the build appears to fail leading to further failures because xmlrpc_config.h is not generated, In the build output I have: 1>------ Build started: Project: xmlrpc, Configuration: Debug Win32 ------ 1>Performing Pre-Build Event... 1>'and' is not recognized as an internal or external command, 1>operable program or batch file. 1>'and' is not recognized as an internal or external command, 1>operable program or batch file. 2>------ Build started: Project: libdingaling, Configuration: Debug Win32 ------ 1>'and' is not recognized as an internal or external command, 1>operable program or batch file. 1>Project : error PRJ0019: A tool returned an error code from "Performing Pre-Build Event..." 1>Build log was saved at "file://d:\Documents and Settings\Jason\My Documents\Visual Studio 2005\Projects\FreeSWITCH\libs\win32\xmlrpc\Debug\xmlrpc\BuildLog.htm" 1>xmlrpc - 1 error(s), 0 warning(s) Any suggestions? Many thanks, Jason