I have 3 Cisco SPA504G phones connected to Freeswitch using the SLA feature. Everything seems to work except for inbound calls, some calls the lights are proper and others the lights are wrong. I have 3 phones sharing extension 122. The call sequence to demonstrate the behavior of the lights, from a fourth phone, I dial 122 and all 3 phones ring with the x122 line key blinking. If I answer the phone that is first in the list of INVITEs to x122, then the other 2 phones work properly with their x122 line key blinking indicating an answered call. However if I answer on the phone that was the 2^nd or 3^rd INVITE, then the line key lights for the other 2 phones go out indicating an idle line (it should show an active line). Looking at the SIP trace, for the call that worked properly, there are 3 INVITEs to the phone, 200 OK from the phone that answered (which is the phone that was the target of the first INVITE), CANCEL to the other 2 phones, then the key part, the NOTIFYs are sent with appearance-state=active. When I answer with one of the other 2 phones, the SIP trace shows that same sequence EXCEPT the NOTIFYs have appearance-state=idle. I tried this with the latest get, version 1.2.1 and a get from about 9 months ago. All have the same issue.All phones register using domain name. Here is a portion of the SLA debug showing 'idle' that when works the call_info_state is 'active': 2012-08-21 14:52:13.081302 [ERR] sofia_presence.c:1249 STATE SQL update sip_dialogs set call_info='appearance-index=1',call_info_state='idle' where hostname=....................... What should I try?