Hello, Here comes the patch. The patch fixes the CID for France (and probably other european countries except maybe england where a specific TAS has to be used), both for incoming calls and call waiting cases. If anybody can try this patch with US hardware to verify the compatibility. I added a new parameter in openzap.conf (modem-type defaulting to FSK_BELL202) so that modulation can be specified in config. The patch also adds the MWI functionnality on FXS ports (that meant to also patch mod_voicemail), by using the MWI-Account parameter in directory set to something like "openzap/x/y". Please comment on this, if any modification need to be made. François On Mon, 15 Feb 2010 23:40:38 +0100, wrote: Hello, I'm very happy to announce I could finally get this to work. So far I only have a very dirty patch so I'll try to arrange this a little bit, then I'll post it to the list. Does anybody have an idea on how to make the CID feature configurable (for the different standards used BELL/V23) ? François DE : freeswitch-dev-bounces@lists.freeswitch.org [mailto:freeswitch-dev-bounces@lists.freeswitch.org] DE LA PART DE Moises Silva ENVOY : mardi 9 février 2010 07:33 : freeswitch-dev@lists.freeswitch.org OBJET : Re: [Freeswitch-dev] Openzap and CLIP Hello François, On Fri, Feb 5, 2010 at 11:18 AM, François Legal That lead me to think that maybe this is a non implemented feature and maybe the data in fsk_buffer should be sent somewhere to the card. Could anybody shed me some light on this. I am not terribly familiar with the analog code, but ... The fsk buffer seems to be sent when calling send_caller_id(), which is called from ZAP_CHANNEL_STATE_CALLWAITING. In any case, there is not much places where the modulated signal can be sent, everything goes down the file descriptor of the channel via zap_channel_write(). As I said, is done through send_caller_id() -> zap_channel_send_fsk_data() which sets the write function pointer to zchan_fsk_write_sample() and is then called back when calling zap_fsk_modulator_send_all(). May be you should take a look at src/testcid.c to learn about the API usage and src/zap_callerid.c to see the implementation. -- Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com [1] Links: ------ [1] mailto:moy@sangoma.com