Thanks Anthony, The box with the TE210p has: ---------------------------- Zaptel 1.4.12 Libpri 1.4.10 Openzap via Freeswitch 1.0.3 I initially had the two ports of the TE210p connected together for testing. I had D-Channel issues fairly often. Here is the interesting bit: I noticed that the code around line 117 in lpwrap_pri.c had changed over the last 4 months (since version 693). I updated openzap to the head, recompiled and my little test app making calls from one PRI to the other on the TE210p worked fine (or so I thought, see below). Vanilla Freeswitch box with TE110p: ----------------------------------- Zaptel rev 4630 (from http://wiki.freeswitch.org/wiki/Zaptel_Tutorial) Libpri 1.4.10.1 Freeswitch 1.0.3 Connect the two together and D-channel errors, which was no surprise on my previous experience, so I updated Freeswitch to the trunk. At this point I still got D-channel errors as reported in the last email. Thanks again, -alex Anthony Minessale wrote:
Which revision of FS/OpenZAP/Zaptel are you using respectively?
All the errors after your shutdown are not really clues they are just typical things that happen when you close the socket but the endless D-READ FAIL sounds strange. How often does this happen?
We mostly have sangoma users so we have less info on Digium cards but I can try to investigate your problem for you if you answer my first round of questions.
On Wed, Jul 22, 2009 at 10:16 PM, Alex Green <alexg@etherstack.com <mailto:alexg@etherstack.com>> wrote:
On a number of occasions using openzap with libpri the D channel seems to some how lose synchronisation resulting in 'D-READ FAIL! []'.
Background: ----------- On one side is a very standard Linux box with Freeswitch and a TE110p card. The signalling is set up to be a Network E1. On the other side of the PRI coax cable is a box I am experimenting with has openzap interacting with a small application of my own. This side is set up to be a CPE E1 (using a TE210p). This problem has happened to me previously using freeswtich/openzap but scouring the internet has found nought. I am concerned that I have done something silly, but I have double checked everything. The error is printed from lpwrap_pri.c line 117.
Symptoms: --------- On freeswitch "D-READ FAIL! []" is just printed to screen over and over again. After issuing a shutdown the following clue is given after stopping mod_openzap: 2009-07-22 17:11:07 [INFO] zap_io.c:257 zap_channel_destroy() Closing channel zt:1:30 fd:67 2009-07-22 17:11:07 [INFO] zap_io.c:257 zap_channel_destroy() Closing channel zt:1:31 fd:68 D-READ FAIL! [] Error = -1 Lpwrap Run Pri: : Bad file descriptor
On Openzap (without freeswitch) the following happens: [CRIT] src/ozmod/ozmod_libpri/lpwrap_pri.c:122 __pri_lpwrap_read() span 5 D-READ FAIL! [] [ERROR] src/ozmod/ozmod_libpri/ozmod_libpri.c:88 s_pri_error() !! Received short I-frame (expected 4, got -3) [DEBUG] src/ozmod/ozmod_libpri/ozmod_libpri.c:812 process_event() EVENT [ALARM_TRAP][7][5:1] STATE [PROGRESS_MEDIA] [DEBUG] src/ozmod/ozmod_libpri/ozmod_libpri.c:821 process_event() Changing state on 5:1 from PROGRESS_MEDIA to RESTART [WARNING] src/ozmod/ozmod_libpri/ozmod_libpri.c:831 process_event() channel 5:1 (1:1) has alarms! [YELLOW/LOOP] [DEBUG] src/ozmod/ozmod_libpri/ozmod_libpri.c:812 process_event() EVENT [ALARM_TRAP][7][5:2] STATE [DOWN] ...The last two are printed repeatedly.
For some extra information I have summarised my setup below. Any help on this (surly I am not the first person to experience this!) is greatly appreciated. Many thanks, -alex
Setup: ------ *Zaptel.conf* Box1 (Freeswitch Network E1) has 'span=1,1,0,ccs,hdb3' Box2 (Openzap CPE E1) has 'span=1,0,0,ccs,hdb3' I have experimented with crc4 on/off and timing of 1/2.
*openzap.conf* similar on both sides. [span zt] number => 1 trunk_type => e1 b-channel => 1-15,17-31 d-channel=> 16
*openzap.conf.xml* Box1 (Freeswitch Network E1). <libpri_spans> <span id="1"> <param name="node" value="network"/> <param name="switch" value="euroisdn"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </libpri_spans>
Box2 (Openzap CPE) passes the following to libpri (via zap_configure_span); "node", "cpe", "switch", "euroisdn", "dp", "unknown", "l1", "alaw",
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org <mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 <http://iax:guest@conference.freeswitch.org/888> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org