[Freeswitch-users] Debian8 FS-1.6.10 simple bridging and high CPU load

[Mikhail Demekhov]

My colleague from another city said that his system СentOS-6.5 and 
FS-1.4 on the CPU load is very small.
"top" shows loading a few percent at 150 the same as my server calls.
A colleague was very surprised when I saw the CPU load on my server.
Here I am trying to figure out what was wrong.

Regards,
Mikhail Demekhov


> I don’t see a problem there... look at how low the individual cores are and the loadavg is barely 1.5...  that’s actually doing quite well for a multicore system.... I would guess theres still plenty of headroom on that box
>
> -----Original Message-----
> From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Mikhail Demekhov
> Sent: Friday, September 30, 2016 8:02 AM
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: Re: [Freeswitch-users] Debian8 FS-1.6.10 simple bridging and high CPU load
>
> in the attachment pics output top -p <fs pid> -H and htop
>
> 29.09.2016 17:12, Ken Rice пишет:
>> Better to just use htop and you can not only see that but pretty
>> graphs heh
>>
>> -----Original Message-----
>> From: freeswitch-users-bounces at lists.freeswitch.org
>> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of
>> Kevin Wormington
>> Sent: Thursday, September 29, 2016 8:59 AM
>> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> Subject: Re: [Freeswitch-users] Debian8 FS-1.6.10 simple bridging and
>> high CPU load
>>
>> If you press ‘1’ while in top it should display the usage of individual CPUs so you can see Ken’s point.
>>
>>
>>> On Sep 29, 2016, at 7:03 AM, Ken Rice <krice at freeswitch.org> wrote:
>>>
>>> Keep in mind that top showing 125% is VERY misleading... lets say you
>>> have a
>>> 10 core system for the sake of example, 125% in top means you are
>>> using roughly 12.5% of the total CPU Power of your system.  This is
>>> because TOP takes the individual core percentages and adds them up...
>>>
>>> -----Original Message-----
>>> From: freeswitch-users-bounces at lists.freeswitch.org
>>> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of
>>> Mikhail Demekhov
>>> Sent: Thursday, September 29, 2016 1:50 AM
>>> To: freeswitch-users at lists.freeswitch.org
>>> Subject: [Freeswitch-users] Debian8 FS-1.6.10 simple bridging and
>>> high CPU load
>>>
>>> Hello!
>>>
>>> I have installed freeswitch using apt-get on my debian 8 sersver from
>>> https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie
>>> block under title 'latest release branch:'
>>>
>>> My server hardware:
>>> 2xCPU AMD Opteron(tm) Processor 6262 HE
>>> 64 GB RAM
>>>
>>> I'm using calls with bridging from voipgw1(2,3) to gw4(5,6), G711A on
>>> both leg A and leg B core.db in TMPFS
>>>
>>> Through my server takes about 125 simultaneous calls
>>>
>>> CPU load about 125%! It is very high in my opinion.
>>>
>>> How to fix it?
>>>
>
>
>
>
> _________________________________________________________________________