[Freeswitch-users] Debian8 FS-1.6.10 simple bridging and high CPU load

[Ken Rice]

I don’t see a problem there... look at how low the individual cores are and the loadavg is barely 1.5...  that’s actually doing quite well for a multicore system.... I would guess theres still plenty of headroom on that box

-----Original Message-----
From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Mikhail Demekhov
Sent: Friday, September 30, 2016 8:02 AM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] Debian8 FS-1.6.10 simple bridging and high CPU load

in the attachment pics output top -p <fs pid> -H and htop

29.09.2016 17:12, Ken Rice пишет:
> Better to just use htop and you can not only see that but pretty 
> graphs heh
>
> -----Original Message-----
> From: freeswitch-users-bounces at lists.freeswitch.org 
> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of 
> Kevin Wormington
> Sent: Thursday, September 29, 2016 8:59 AM
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: Re: [Freeswitch-users] Debian8 FS-1.6.10 simple bridging and 
> high CPU load
>
> If you press ‘1’ while in top it should display the usage of individual CPUs so you can see Ken’s point.
>
>
>> On Sep 29, 2016, at 7:03 AM, Ken Rice <krice at freeswitch.org> wrote:
>>
>> Keep in mind that top showing 125% is VERY misleading... lets say you 
>> have a
>> 10 core system for the sake of example, 125% in top means you are 
>> using roughly 12.5% of the total CPU Power of your system.  This is 
>> because TOP takes the individual core percentages and adds them up...
>>
>> -----Original Message-----
>> From: freeswitch-users-bounces at lists.freeswitch.org
>> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of 
>> Mikhail Demekhov
>> Sent: Thursday, September 29, 2016 1:50 AM
>> To: freeswitch-users at lists.freeswitch.org
>> Subject: [Freeswitch-users] Debian8 FS-1.6.10 simple bridging and 
>> high CPU load
>>
>> Hello!
>>
>> I have installed freeswitch using apt-get on my debian 8 sersver from 
>> https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie
>> block under title 'latest release branch:'
>>
>> My server hardware:
>> 2xCPU AMD Opteron(tm) Processor 6262 HE
>> 64 GB RAM
>>
>> I'm using calls with bridging from voipgw1(2,3) to gw4(5,6), G711A on 
>> both leg A and leg B core.db in TMPFS
>>
>> Through my server takes about 125 simultaneous calls
>>
>> CPU load about 125%! It is very high in my opinion.
>>
>> How to fix it?
>>