[Freeswitch-users] Bridging calls to other server

[Caio Assis]

Let me see if I understood. Do I have to create an external profile for VoIP and an internal profile for gateway? Because the way I'm doing now is external profile for both.


________________________________
From: freeswitch-users-bounces at lists.freeswitch.org <freeswitch-users-bounces at lists.freeswitch.org> on behalf of Steven Ayre <steveayre at gmail.com>
Sent: Monday, October 3, 2016 9:38 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Bridging calls to other server

On 'Main Server' you want to bind the internal profile to eth0's IP and the external profile to eth1's IP. That's the sip-ip rtp-ip ext-sip-ip ext-rtp-ip settings.

The IP the call is sent from depends which profile you're bridging through, you'd want to bridge to sofia/internal/12345 at 192.168.1.255<mailto:12345 at 192.168.1.255>. Right now it sounds like you're using the external profile instead.

If you use a sofia gateway you'd bridge to sofia/gateway/mygsmgateway/12345 and the profile it would use is the one the gateway is configured under.

You would use the external profile to communicate with your VoIP provider.

In FreeSWITCH it's not possible by design to bind to 0.0.0.0, instead you configure a different profile for each IP/port you want to listen on.

-Steve


On 28 September 2016 at 19:03, Caio Assis <caioebassis at hotmail.com<mailto:caioebassis at hotmail.com>> wrote:

Good afternoon.


The situation I'm facing is this: I have a server that has 2 network interfaces (eth0 and eth1), the former with an external static IP set, and the ladder with a internal IP set. I have one more server on my private network that bridges calls to my gsm gateway (which means it's set with a internal IP as well), and I have a VoIP account to bridge other calls. The problem I'm facing is: when I try to bridge a call to my gateway, in my private network, the IP freeswitch is sending is the external IP, so the call is denied by my gateway. With the VoIP I don't have any problem, since the IP external meets my voip's external IP. Just to give you an example, it's like this.


 Main Server (eth0: 192.168.1.50, eth1: 123.123.123.123)

Main Server bridges calls to Gateway (192.168.1.255). The gateway recieves an request coming from 123.123.123.123, and it's set to decline external IP, so the call gets a forbidden signal.

Main Server bridges calls to VoIP provider(177.177.177.177). VoIP accepts my calls, since the request it receives is coming from the external IP.


I need Freeswitch to send the call to the gateway using the internal IP and voip using external IP. I use asterisk, and i set a parameter brindaddr=0.0.0.0 to accept request coming from both internal and external IPs. All of my asterisk configurations work fine.


Thanks.

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<mailto:consulting at freeswitch.org>
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20161003/72a70d57/attachment.html