[Freeswitch-users] Cisco SPA + BLF behavior

[Robert Stevens]

Hello Gabriel,


What revision of Freeswitch are you running currently?


Best regards,

Robert Stevens
rstevens at robcoit.com
________________________________
From: freeswitch-users-bounces at lists.freeswitch.org <freeswitch-users-bounces at lists.freeswitch.org> on behalf of Gabriel Kuri <gkuri at ieee.org>
Sent: Tuesday, January 13, 2015 2:13 AM
To: FreeSWITCH Users Help
Subject: [Freeswitch-users] Cisco SPA + BLF behavior

I noticed that on a Cisco SPA500 series phone, when configured to do BLF+SD+CP for an extension, the LED for that line on the SPA does not turn red when the line goes off-hook on another phone. It turns RED when the call is actually in progress (ie after the number has been dialed and it's ringing). This behavior is different than when the same line is configured as a shared line appearance on the SPA, the LED turns red immedialtely when the line goes off hook on another phone. It appears FreeSWITCH is sending the same SIP NOTIFY event in both cases with line showing seized (appearance-index=1;appearance-state=seized), so I'm think this might be a bug in the phone's firmware, which is running the latest version, 7.5.6a. I did try a couple older version and had the same results. Am I missing something or is this the behavior of this phone? Should I bother to open a TAC case with Cisco, the behavior seems buggy to me?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150114/5119778e/attachment-0001.html