[Freeswitch-users] AUDIO RTP REPORTS ERROR: [Bind Error! on Multipple profile

[Steve Kieu]

Just downgrade to FS 1.2 Stable (from 1.4) and problem is fixed. Is it a
bug in the latest stable version?


On Fri, Feb 20, 2015 at 5:53 PM, Steve Kieu <msh.computing at gmail.com> wrote:

> Hi everyone,
>
> My setup is that I have
> * internal.xml on 192.168.0.2
> * vpn.xml on 10.8.0.1
> * external.xml
>
> Freeswitch behind NAT router ; wlan0 has 192.168.0.2 and 10.8.0.1 is tun0
> which is the openvpn internface. Default gateway is wlan0.
>
> Thing like normal using internal.xml
>
> But for call from A registered in vpn profile I always got
>
> 2015-02-20 17:41:44.591664 [ERR] sofia_glue.c:3989 AUDIO RTP REPORTS
> ERROR: [Bind Error! XXX:23324]
>
> XXX is my external internet IP.
>
> The vpn.xml I set:
> <param name="rtp-ip" value="$${external_rtp_ip}"/>
>     <!-- ip address to bind to, DO NOT USE HOSTNAMES ONLY IP ADDRESSES -->
>     <param name="sip-ip" value="10.8.0.1"/>
>
> <param name="ext-sip-ip" value="auto-nat"/>
> <param name="ext-rtp-ip" value="auto-nat"/>
>
> no matter what I set in ext-rtp-ip (did replace auto-nat with my external
> IP) it still gives the errors.
>
> I want for the vpn profile, just use the vpn IP for sip for the endpoint
> register with this, but using correct sip rtp when sending out to endpoint
> registered in other profile - basically making call between profile working
> - Can freeswitch support that and how ?
>
> I did set all IP to use vpn address only, and call making between same
> profile (vpn) works. But not to other profile and not to external gateway.
> Same problem.
>
>
> Thanks a lot in advance.
>
>
>
> --
> Steve Kieu
>



-- 
Steve Kieu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150220/c3215cf2/attachment-0001.html