[Freeswitch-users] RTP packet loss on outgoing streams

Brian West brian at freeswitch.org
Sat Apr 18 00:49:58 MSD 2015


What i'm getting at is you should never have dropped packets on the host
itself like that, If you do then you probably have WinNic's aka RealTek
garbage.

On Fri, Apr 17, 2015 at 3:47 PM, Stanislav Sinyagin <ssinyagin at gmail.com>
wrote:

> you can try playing with the buffer size (-B option), but in general,
> tshark is quite CPU-intensive when it tries to analyze the UDP packet
> stream in real time. Also I'm not sure if it's multithreaded -- I
> guess it's not, so it tries to analyze all the streams in a single
> thread in real time.
>
> I made this set of scripts to run on a low-power CPU (Atom and such):
> https://github.com/voxserv/voip_qos_probe
> What I do is run tcpdump during the call, store the capture, and then
> analyze the output with tshark in low priority.
>
> Also I noticed that on a Xen VM on an Intel CoreDuo CPU, you need to
> increase the tcpdump's buffer size with -B option. With default
> settings, sometimes it's not even able to capture a single SIP session
> without dropping packets.
>
>
>
>
> On Fri, Apr 17, 2015 at 5:01 PM, mbo <mbodbg at gmx.net> wrote:
> > Hello,
> >
> > we need to monitor the voice quality on our server. To test this, we
> setup a
> > test environment with 2 freeswitches, originating calls from freeswitch 1
> > and then answer them on freeswitch 2 and play an announcement. To analyze
> > the traffic, we us tshark with the following command:
> >
> > tshark -q -f 'udp' -o rtp.heuristic_rtp:TRUE -z rtp,strems -w test-pcap
> >
> > The result is, that we see packet loss around 20% on outgoing RTP
> streams,
> > when we have more then 20 calls. The load average shown with the top
> command
> > is always < 0.3 with a 4 core CPU and CPU load is less then 10%.
> >
> > ========================= RTP Streams ========================
> >     Src IP addr  Port    Dest IP addr  Port       SSRC          Payload
> > Pkts         Lost   Max Delta(ms)  Max Jitter(ms) Mean Jitter(ms)
> Problems?
> >   192.168.1.134 27590   192.168.1.135 22576 0xCD7A189D      ITU-T G.722
> > 800     2 (0.2%)           59.93            0.11            0.05 X
> >   192.168.1.135 22576   192.168.1.134 27590 0x5D4E50CD      ITU-T G.722
> > 599   202 (25.2%)          160.24            0.16            0.05 X
> >   192.168.1.134 28172   192.168.1.135 29704 0xD53EC9AD      ITU-T G.722
> > 798     2 (0.2%)           59.99            0.07            0.04 X
> >   192.168.1.135 29704   192.168.1.134 28172 0x5D50942D      ITU-T G.722
> > 713    86 (10.8%)          199.98            0.08            0.04 X
> >   192.168.1.135 25794   192.168.1.134 16460 0x5D51E43D      ITU-T G.722
> > 633   165 (20.7%)          180.25            0.75            0.07 X
> >
> > Instead of tshark, we also tried to capture SIP & RTP with tcpdump with
> the
> > following command:
> >
> > tcpdump -i any -T rtp -vvvvv -s 0 -w test.pcap
> >
> > If we analyze this file with wireshark (TELEPHONY->RTP->Show all
> Streams),
> > it shows almost always 0% for packet loss. Only if we increase the load
> to
> > 50 calls we can see a similar scenario where inbound calls still have <
> 1%
> > packet loss but outgoing RTP streams have up to 20 % packet loss. We also
> > repeated the same test with freeswitch 1.4.15 with much more powerful
> > hardware with almost the same results.
> >
> > The question is what do we see here. Does tshark show us wrong result?
> Can
> > we more trust on the results captured with tcpdump or is there finally an
> > issue in freeswitch when sending outgoing packets? Or is the method to
> > capture on the server in general the wrong approach?
> >
> > Thanks for any comments and hints
> >
> > Markus
> >
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://confluence.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 

*Brian West*
brian at freeswitch.org


*Twitter: @FreeSWITCH , @briankwest*
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com

ClueCon 2015 Call for Speakers <https://www.cluecon.com/call-for-speakers/> |
Register <https://freeswitch.com/cart.php?gid=1> TODAY! | Reddit:
/r/freeswitch <https://www.reddit.com/r/freeswitch>

*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378)
*iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150417/aebf6012/attachment-0001.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list