[Freeswitch-users] Originate fails for freetdm channel

[Kshitij Saxena]

I did install libsng_isdn before running bootstrap.sh;

these were my thoughts as well that I might have missed installing
libsng_isdn before running bootstrap.sh so after finding the issue, I
re-compiled libsng_isdn, ran make clean on FS and then ran bootstrap.sh
again but the check was still failing.

Also, I have installed freetdm several times and got the FS installation to
work flawlessly before but the configuration scripts are not detecting
libsng correctly this time. Any ideas?

Regards,
Kshitij Saxena

---------------------

Hi,

Did you follow the install instructions for wanrouter driver and
libsng_isdn library?  These have to be performed before the Freeswitch
bootstrap step.  Freeswitch detects installed libraries during the
./bootstrap step.
http://wiki.sangoma.com/wanpipe-freeswitch-ftdm-installation


Regards,
Robert




On Tue, Mar 25, 2014 at 11:34 PM, Kshitij Saxena <ksaxmail at gmail.com> wrote:

> Solved this in a very hacky way - replying here in case this helps someone
> (although very hacky).
>
> open freeswitch/libs/freetdm/configure.ac
>
> find HAVE_SNG_ISDN="no"
>
> and change it to HAVE_SNG_ISDN="yes"
>
> finally, build FS again
>
> Please take care that this tells configure to build ftmod_sangoma_isdn
> even if its check for the library fails!
>
> Is there a less hacky / more straitforward way?
>
> Regards,
> Kshitij Saxena
>
>
>
>
>
>
> On Tue, Mar 25, 2014 at 7:46 PM, Kshitij Saxena <ksaxmail at gmail.com>wrote:
>
>> ok. The problem seems to be that ftmod_sangoma_isdn hasn't been compiled.
>>
>> This is strange because I had compiled both wanpipe as well as
>> libsng_isdn before configuring FS.
>>
>> I repeated the steps again in case I had missed something - recompiled
>> libsng_isdn, began FS with make clean, then bootstrap, then configure and
>> make but ftmod_sangoma_isdn is still not being compiled!
>>
>> Am I missing something? Is this a bug?
>>
>> Regards,
>> Kshitij
>>
>>
>> On Tue, Mar 25, 2014 at 6:03 PM, Kshitij Saxena <ksaxmail at gmail.com>wrote:
>>
>>> The setup is a Sangoma A101E card being run through Wanpipe 7.0.10 on an
>>> Ubuntu 13.10 machine.
>>>
>>> wanrouter status shows "connected" but "originate freetdm/1/a/xxxxxxxxxx
>>> &bridge..." fails with the following error:
>>>
>>> [ERR] ftdm_io.c:2674 [s1c1][1:1] outgoing_call method not implemented in
>>> this span!
>>>
>>> Note that originate is successful with for other cahnnels (i.e.
>>> "originate user/1001 &bridge(9198)" works for example)
>>>
>>> Would appreciate any guidance. Thanks!
>>>
>>> Regards,
>>> Kshitij Saxena
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140326/f738c01c/attachment.html