[Freeswitch-users] Dialplan Issues with Nortel CS1000

[George]

just add this to your public dial plan, we use SHAW's sip trunks and they run on Nortel as well.

<condition field="destination_number" expression="^1231231234(.+)$" break="on-false"/>



George.

----- Original Message -----
From: dgarcia at anew.com.ve
To: "Joel White" <joelewhite at gmail.com>, "FreeSWITCH Users Help" <freeswitch-users at lists.freeswitch.org>
Sent: Saturday, March 1, 2014 4:38:21 AM
Subject: Re: [Freeswitch-users] Dialplan Issues with Nortel CS1000

Hi, 
I have not tested a setup between Nortel CS1000 and FS but I have worked with other sip solutions and Nortel CS1000. Have you done a SIP trace? In my experience with Nortel CS100 they have some "special flavour" about SIP signaling, for example when CS1000 send a call to an external SIP you see the invites something like sip 1234;contextblablablah at ip..... In my case, we have to declare in our equipment the route exactly as CS100 send it, so we declared 1234;contextblablablah as an extension. 
If you can get the sip trace to validate will help. 
Try to modify your dialplan to: take the first 5 digit. 
If you use sjphone in SIP Direct mode and iniate a call to FS, the call end in your " LOCAL 5 Digit Extension" or in the VM? 


On February 26, 2014 at 4:53 PM Joel White <joelewhite at gmail.com> wrote: 



> I have modded the default dialplan to allow 5 digit local extensions. I have the Nortel NRS sending the calls to the public context. I have created the xml to route the incoming call to a local extension. 
> 
> Question is, why do the calls go straight to voicemail without ringing the extension. The extension is registered and can make and recieve calls locally on the FS. 
> 
> The incoming call from the Nortel CS 1000 reaches the XML parsing for "public" and executes the XML in the public folder relating to the Nortel. The call also makes its way to the "default" context and executes the LOCAL 5 Digit Extension XML config. What I am not understanding is why, if it makes it through the variables and expressions and ends up at the 5 digit local dialing, that it would go straight to voicemail without ringing the phone. 
> 
> 
> 
> If anyone has any insight into why this behavior would occur.... please point me in the right direction. 
> 
> 
> Thank you in advance 
> 
> Joel 


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com




Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org