[Freeswitch-users] Freetdm libsng_isdn and Redirecting Number in SETUP - no rdnis

John freeswitch at earthspike.net
Thu Aug 14 05:08:58 MSD 2014


Hi Adam,

I have a similar request. For calls that are forwarded, I get the line
highlighted by * *. For unforwarded calls, the line is missing. I would
like to have the presence of that line exposed as a dialplan variable
somehow.

2014-08-14 01:05:52.412270 [DEBUG] ftmod_sangoma_isdn_trace.c:224
[SNGISDN Q931] wp1 FRAME INCOMING:
  Prot Disc:Q.931/I.451 (0x08)
  Call Ref:28 (Originating side)
  Type:SETUP (0x5)
  Sending complete:
  Bearer Capability:Coding:ITU-T(0) TransferCap:3.1Khz audio(16)
TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3)
  Channel Id: MAP:B1 Type:reserved(12) Map Preferred/Implicit
*  Facility:Prot profile:Remote Operations Protocol(17) *
  Progress Indicator:coding:ITU-T(0) location:Public network, remote
user(4) descr:Origination address is non-ISDN(3)
  Calling Party Number:1XXXXXXX75(l:10) plan:isdn(1)
type:national(2)scr:network, provided(3) pres:allowed(0)
  Called Party Number:4XXXX8(l:6) plan:isdn(1) type:unknown(0)

John

On 13/08/14 23:17, Adam Kuśmirek wrote:
> Hi All
>
> I have FS with libsng and Sangoma A108DE conected to PBX that is
> redirecting calls A -> B to C.
> Received SETUP message:
>  
> 2014-08-13 15:33:21.148143 [DEBUG] ftmod_sangoma_isdn_trace.c:224
> [SNGISDN Q931] wp2 FRAME INCOMING:
>   Prot Disc:Q.931/I.451 (0x08)
>   Call Ref:007D (Originating side)
>   Type:SETUP (0x5)
>   Sending complete:
>   Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0)
> TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3)
>   Channel Id:No:31 Type:B-chans(3)  Exclusive/Implicit
>   Calling Party Number:69214XXXX(l:9) plan:isdn(1)
> type:national(2)scr:user, passed(1) pres:allowed(0)
>   Called Party Number:77544XXXX(l:9) plan:isdn(1) type:unknown(0)
>   Redirecting Number:773XXXX(l:7) plan:isdn(1)
> type:national(2)scr:user, not screened(0) pres:allowed(0)reason:Call
> forwarding unconditional(15)
>
> I need  Redirecting Number  to make correct dialplan decisions, but I
> cannot get it from channel variables.
>
> I hoped, that rdnis channel variable will contain this number, but
> info application tells nothing about it.
>
> Is there any way to get acces to this Redirecting Number information
> in dialplan ?
>
> FreeSWITCH Version 1.2.24+git~20140617T204847Z~9dde4b1548~64bit (git
> 9dde4b1 2014-06-17 20:48:47Z 64bit)
> libsng_isdn-7.29.0.x86_64
>
> Thank you for any help
> Adam
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140814/36ef3214/attachment.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list