[Freeswitch-users] Auto-record works in fs_cli but doesn't work in conference.xml
covici at ccs.covici.com
covici at ccs.covici.com
Fri Apr 4 22:52:28 MSD 2014
You need at least 2 participants to test this.
Jenny Davis <jennyjean75 at gmail.com> wrote:
> Hi, yes I see the mp3 when I test in fs_cli. For some reason, it is just
> not following the same when I include the param in conference for auto. It
> does not read it. I did set the participants to 1 but still to no avail. I
> am running BigBlueButton and have compiled a new switch version to work
> with it, could this be effecting it somehow? There are no errors that I am
> receiving and everything is working fast otherwise.
>
> ---------- Forwarded message ----------
> From: Brian West <brian at freeswitch.org>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Date: Fri, 4 Apr 2014 12:58:25 -0500
> Subject: Re: [Freeswitch-users] Auto-record works in fs_cli but doesn't
> work in conference.xml
> I tested this and it works fine, do you never see the Auto recording line?
> shout:// vs just an MP3 should be no different.
>
> 2014-04-04 12:57:37.449395 [DEBUG] switch_core_session.c:905 Send signal
> _Brian West/20025/883000 at 192.168.1.112 [BREAK]
> 2014-04-04 12:57:37.449395 [DEBUG] mod_conference.c:4159 Setup timer soft
> success interval: 20 samples: 160
> 2014-04-04 12:57:37.449395 [DEBUG] mod_conference.c:2678 Auto recording
> file: /usr/local/freeswitch/recordings/3000-192.168.1.43_
> 2014-04-04-12-57-37.mp3
>
>
> Did you try setting min-required-recording-participants to 1?
>
> --
> Brian West
> brian at freeswitch.org
> FreeSWITCH Solutions, LLC
> PO BOX 2531
> Brookfield, WI 53008-2531
> Twitter: @FreeSWITCH , @briankwest
> http://www.freeswitchbook.com
> http://www.freeswitchcookbook.com
>
> T: +1.918.420.9001 | F: +1.918.420.9002 | M: +1.918.424.WEST
> iNUM: +883 5100 1420 9001
> ISN: 410*543
> Skype:briankwest
> PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)
>
>
> On Fri, Apr 4, 2014 at 11:29 AM, Jenny Davis <jennyjean75 at gmail.com> wrote:
>
> > Hi Brian, thank you. Actually no, I have been testing with user1 and user2
> > in different browsers. I did however change that and it didn't correct the
> > problem.
> >
> > Here is what I have in my profile conference.conf.xml under
> > freeswitch/conf/autoload_configs
> >
> >
> > <profile name="wideband">
> > <param name="domain" value="$${domain}"/>
> > <param name="rate" value="16000"/>
> > <param name="interval" value="20"/>
> > <param name="energy-level" value="300"/>
> > <param name="auto-record" value="shout://
> > source:mypassword at myip.address.com:8000/live.mp3"/>
> > <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
> > <param name="muted-sound" value="conference/conf-muted.wav"/>
> > <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
> > <param name="alone-sound" value="conference/conf-alone.wav"/>
> >
> > <param name="moh-sound" value="$${hold_music}"/>
> > <param name="enter-sound"
> > value="tone_stream://%(200,0,500,600,700)"/>
> > <param name="exit-sound"
> > value="tone_stream://%(500,0,300,200,100,50,25)"/>
> >
> > <param name="kicked-sound" value="conference/conf-kicked.wav"/>
> > <param name="locked-sound" value="conference/conf-locked.wav"/>
> > <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
> > <param name="is-unlocked-sound"
> > value="conference/conf-is-unlocked.wav"/>
> > <param name="pin-sound" value="conference/conf-pin.wav"/>
> > <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
> > <param name="caller-id-name" value="$${outbound_caller_name}"/>
> > <param name="caller-id-number" value="$${outbound_caller_id}"/>
> > <param name="comfort-noise" value="true"/>
> > <!--<param name="tts-engine" value="flite"/>-->
> > <!--<param name="tts-voice" value="kal16"/>-->
> > </profile>
> >
> > Been banging my head on my desk over this
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Brian West <brian at freeswitch.org>
> > To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> > Cc:
> > Date: Fri, 4 Apr 2014 09:43:07 -0500
> > Subject: Re: [Freeswitch-users] Auto-record works in fs_cli but doesn't
> > work in conference.xml
> > I'm guessing you are expecting it to start recording when one person
> > exists in the conference?
> >
> > int min_recording_participants = 2;
> >
> > /* Start auto recording if there's the minimum number of required
> > participants. */
> > if (conference->auto_record && !conference->auto_recording &&
> > (conference->count >= conference->min_recording_participants)) {
> >
> >
> > Which leads me to this option in your conference profile
> > min-required-recording-participants, set it to 1 if you wish it to start
> > when only one person exists.
> >
> > --
> > Brian West
> > brian at freeswitch.org
> > FreeSWITCH Solutions, LLC
> > PO BOX 2531
> > Brookfield, WI 53008-2531
> > Twitter: @FreeSWITCH , @briankwest
> > http://www.freeswitchbook.com
> > http://www.freeswitchcookbook.com
> >
> > T: +1.918.420.9001 | F: +1.918.420.9002 | M: +1.918.424.WEST
> > iNUM: +883 5100 1420 9001
> > ISN: 410*543
> > Skype:briankwest
> > PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)
> >
> >
> > On Fri, Apr 4, 2014 at 10:33 AM, Jenny Davis <jennyjean75 at gmail.com>wrote:
> >
> >> No I wish it was that simple. It works in fs_cli so I am really stumped.
> >> Thought maybe I was putting it in the wrong spot? In wideband profile in
> >> conference.xml?
> >>
> >> On Apr 4, 2014 7:31 AM, "Jenny Davis" <jennyjean75 at gmail.com> wrote:
> >> >
> >> > Anyone know what could be the issue? Please?
> >> >
> >> >
> >> > On Thu, Apr 3, 2014 at 6:43 AM, Jenny Davis <jennyjean75 at gmail.com>
> >> wrote:
> >> >>
> >> >> I have version 1.2 stable installed with mod_shout enabled and
> >> running, when I test in the fs_cli recording to icecast works. However when
> >> I add param name auto-record shout:// to conference.xml nothing happens, no
> >> stream is showing in icecast and isn't being recorded. I have not seen a
> >> specific example on how to add auto-record for streaming to icecast, so A-
> >> where to add the param name would be helpful as well as B- exact context.
> >> Please and thank you!
> >> >
> >> >
> >>
> >>
> >
>
> ----------------------------------------------------
> Alternatives:
>
> ----------------------------------------------------
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
>
>
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
covici at ccs.covici.com
Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users
mailing list