[Freeswitch-users] Auto-record works in fs_cli but doesn't work in conference.xml

[Jenny Davis]

Hi, yes I see the mp3 when I test in fs_cli. For some reason, it is just
not following the same when I include the param in conference for auto. It
does not read it. I did set the participants to 1 but still to no avail. I
am running BigBlueButton and have compiled a new switch version to work
with it, could this be effecting it somehow? There are no errors that I am
receiving and everything is working fast otherwise.

---------- Forwarded message ----------
From: Brian West <brian at freeswitch.org>
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Cc:
Date: Fri, 4 Apr 2014 12:58:25 -0500
Subject: Re: [Freeswitch-users] Auto-record works in fs_cli but doesn't
work in conference.xml
I tested this and it works fine, do you never see the Auto recording line?
shout:// vs just an MP3 should be no different.

2014-04-04 12:57:37.449395 [DEBUG] switch_core_session.c:905 Send signal
_Brian West/20025/883000 at 192.168.1.112 [BREAK]
2014-04-04 12:57:37.449395 [DEBUG] mod_conference.c:4159 Setup timer soft
success interval: 20  samples: 160
2014-04-04 12:57:37.449395 [DEBUG] mod_conference.c:2678 Auto recording
file: /usr/local/freeswitch/recordings/3000-192.168.1.43_
2014-04-04-12-57-37.mp3


Did you try setting min-required-recording-participants to 1?

--
Brian West
brian at freeswitch.org
FreeSWITCH Solutions, LLC
PO BOX 2531
Brookfield, WI 53008-2531
Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com

T: +1.918.420.9001  |  F: +1.918.420.9002  |  M: +1.918.424.WEST
iNUM: +883 5100 1420 9001
ISN: 410*543
Skype:briankwest
PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)


On Fri, Apr 4, 2014 at 11:29 AM, Jenny Davis <jennyjean75 at gmail.com> wrote:

> Hi Brian, thank you. Actually no, I have been testing with user1 and user2
> in different browsers. I did however change that and it didn't correct the
> problem.
>
> Here is what I have in my profile conference.conf.xml under
> freeswitch/conf/autoload_configs
>
>
> <profile name="wideband">
>   <param name="domain" value="$${domain}"/>
>       <param name="rate" value="16000"/>
>       <param name="interval" value="20"/>
>       <param name="energy-level" value="300"/>
>    <param name="auto-record" value="shout://
> source:mypassword at myip.address.com:8000/live.mp3"/>
>   <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
>       <param name="muted-sound" value="conference/conf-muted.wav"/>
>       <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
>       <param name="alone-sound" value="conference/conf-alone.wav"/>
>
>       <param name="moh-sound" value="$${hold_music}"/>
>       <param name="enter-sound"
> value="tone_stream://%(200,0,500,600,700)"/>
>       <param name="exit-sound"
> value="tone_stream://%(500,0,300,200,100,50,25)"/>
>
>       <param name="kicked-sound" value="conference/conf-kicked.wav"/>
>       <param name="locked-sound" value="conference/conf-locked.wav"/>
>       <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
>       <param name="is-unlocked-sound"
> value="conference/conf-is-unlocked.wav"/>
>       <param name="pin-sound" value="conference/conf-pin.wav"/>
>       <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
>       <param name="caller-id-name" value="$${outbound_caller_name}"/>
>       <param name="caller-id-number" value="$${outbound_caller_id}"/>
>       <param name="comfort-noise" value="true"/>
>   <!--<param name="tts-engine" value="flite"/>-->
>       <!--<param name="tts-voice" value="kal16"/>-->
>     </profile>
>
> Been banging my head on my desk over this
>
>
>
> ---------- Forwarded message ----------
> From: Brian West <brian at freeswitch.org>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Date: Fri, 4 Apr 2014 09:43:07 -0500
> Subject: Re: [Freeswitch-users] Auto-record works in fs_cli but doesn't
> work in conference.xml
> I'm guessing you are expecting it to start recording when one person
> exists in the conference?
>
>         int min_recording_participants = 2;
>
>         /* Start auto recording if there's the minimum number of required
> participants. */
>         if (conference->auto_record && !conference->auto_recording &&
> (conference->count >= conference->min_recording_participants)) {
>
>
> Which leads me to this option in your conference profile
> min-required-recording-participants, set it to 1 if you wish it to start
> when only one person exists.
>
> --
> Brian West
> brian at freeswitch.org
> FreeSWITCH Solutions, LLC
> PO BOX 2531
> Brookfield, WI 53008-2531
> Twitter: @FreeSWITCH , @briankwest
> http://www.freeswitchbook.com
> http://www.freeswitchcookbook.com
>
> T: +1.918.420.9001  |  F: +1.918.420.9002  |  M: +1.918.424.WEST
> iNUM: +883 5100 1420 9001
> ISN: 410*543
> Skype:briankwest
> PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)
>
>
> On Fri, Apr 4, 2014 at 10:33 AM, Jenny Davis <jennyjean75 at gmail.com>wrote:
>
>> No I wish it was that simple. It works in fs_cli so I am really stumped.
>> Thought maybe I was putting it in the wrong spot? In wideband profile in
>> conference.xml?
>>
>> On Apr 4, 2014 7:31 AM, "Jenny Davis" <jennyjean75 at gmail.com> wrote:
>> >
>> > Anyone know what could be the issue? Please?
>> >
>> >
>> > On Thu, Apr 3, 2014 at 6:43 AM, Jenny Davis <jennyjean75 at gmail.com>
>> wrote:
>> >>
>> >> I have version 1.2 stable installed with mod_shout enabled and
>> running, when I test in the fs_cli recording to icecast works. However when
>> I add param name auto-record shout:// to conference.xml nothing happens, no
>> stream is showing in icecast and isn't being recorded. I have not seen a
>> specific example on how to add auto-record for streaming to icecast, so A-
>> where to add the param name would be helpful as well as B- exact context.
>> Please and thank you!
>> >
>> >
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140404/fe75c69c/attachment.html