[Freeswitch-users] 30 Second call drop.

[Antonio Silva]

Hi,

sometime ago i had something similar...with some old firmware versions
of yealink phones.

I managed to solved by disabling session_timers in the profile, param,
enable_timer=false .

hope it helps.

António





On Fri, 2013-07-19 at 07:49 -0700, Paul wrote: 

> Hi Kaleem,
> 
> I will double check those settings.
> 
> I have my firewall setup very specific (it's not wide open to the world)..
> I h accept port 5060 UDP and all the RTP ports but only if the source IP
> is of my SIP Trunk provider proxy, otherwise it's invisible.
> 
> Thanks for the tip!
> 
> Paul
> 
> On Thu, July 18, 2013 1:06 pm, Kaleem wrote:
> > For some wired reason my last mail is not showing any text,
> >
> >
> > It was "Hi Paul,
> >
> >
> > Had similar issues myself few months back, it ended up port blocked on
> > external firewall.
> >
> > To confirm if its same issue, please test inbound and outbound call,
> > outbound was disconnecting after 30 sec when free switch was sending 200
> > ok and not receiving response."
> >
> > Don't know my emails are going blank :(
> >
> >
> > Sent from my iPhone
> >
> >
> > On 18 Jul 2013, at 20:55, Kaleem <k4kaleem at gmail.com> wrote:
> >
> >
> >> Hi Paul,
> >>
> >>
> >> Had similar issues myself few months back, it ended up port blocked on
> >> external firewall.
> >>
> >> To confirm if its same issue, please test inbound and outbound call,
> >> outbound was disconnecting after 30 sec when free switch was sending
> >> 200 ok and not receiving response.
> >>
> >>
> >> Sent from my iPhone
> >>
> >>
> >> On 18 Jul 2013, at 16:54, "Paul" <pasha at prosperity4ever.com> wrote:
> >>
> >>
> >>> Hi guys,
> >>>
> >>>
> >>> After hours of googling and trying every different config options I
> >>> need some help!
> >>>
> >>> My scenario is as follows:
> >>>
> >>>
> >>> Remote Network 1: 192.168.1.0/24 (10.8.0.X/32 via openVPN tun)
> >>> Remote Network 2: 192.168.5.0/24 (10.9.0.X/32 via openVPN tun)
> >>>
> >>>
> >>> Main Network (where Freeswitch resides): 10.0.0.0/24
> >>>
> >>>
> >>> My sip gateway/proxy: 10.0.0.40 (kamailio)
> >>> Freeswitch: 10.0.0.34
> >>>
> >>>
> >>> I can fully use the VPN from both networks (ssh, web gui control,
> >>> etc)
> >>>
> >>> phones can register, however here are my problems:
> >>>
> >>> When calling incoming DID none of the extensions ever get ring, it
> >>> skips to voicemail... when leaving a message voicemail cuts of after
> >>> 30-31
> >>> seconds exactly. I am wondering if freeswitch isn't detecting my
> >>> client sending audio and interprets it as silence and therefore hangs
> >>> up. The voicemail message itsel does contain everything said right up
> >>> to the hang up.
> >>>
> >>> Sometimes I can call between extensions if they are on the same side
> >>> of the VPN subnet (say 101 calling 101 and they both are coming from
> >>> 192.168.1.0/24 via 10.8.0.0/24)
> >>> If 100 is on 10.8.0/24 and 101 is on 10.9.0.0/24 freeswitch just says
> >>> user is unavailable.
> >>>
> >>> I'm suspecting this is a NAT issue, all the reading I have done talks
> >>>  about "external sip and rtp ip" in my case my trunk hooks up from
> >>> private ip to private ip, it's the kamailio that's supposed to do the
> >>> NAT (which I
> >>> have verified works fine, I can place outgoing calls through it from
> >>> other PBXs no problem with two way audio and working as it should be).
> >>>
> >>>
> >>> I'm not sure if there is a way to enable nat or not with freeswitch.
> >>> One
> >>> thing I have done (as I've found this worked for some people) is set
> >>> all references to sip-ip ext-sip-ip, rtp-ip and ext-rtp-ip to
> >>> 10.0.0.34 (my
> >>> freeswitch eth0). There are no other adapters on the box.
> >>>
> >>> I am hoping that as this is my first time setting up freeswitch that
> >>> one of you freeswitch experts can point me in the right direction :)
> >>>
> >>> Thanks in advance guys!
> >>>
> >>>
> >>>
> >>>
> >>>
> >
> > _________________________________________________________________________
> >  Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org http://www.freeswitchsolutions.com
> >
> >
> > 
> > 
> >
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> >
> 
> 
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> 
> 
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130719/3cc0c71a/attachment.html