[Freeswitch-users] unable to send fax using txfax on LAN

[arun sethi]

I just tried by changing ata to cisco ata 188 and it worked fine.


On Thu, Jul 4, 2013 at 10:38 PM, arun sethi <asethi168 at gmail.com> wrote:

> The version of freeswitch is 1.2 stable
>
> FreeSWITCH Version 1.2.11+git~20130704T172759Z~667a8d8868 (git 667a8d8
> 2013-07-04 17:27:59Z)
>
>
>
> On Thu, Jul 4, 2013 at 10:33 PM, arun sethi <asethi168 at gmail.com> wrote:
>
>> I am trying to send fax to a local fax machine (Canon MX 512) on my LAN
>> using freeswitch. The machine is connected via linksys pap2 (ATA) on LAN to
>> freeswitch.
>>
>> the command I am using on freeswitch console is:
>> /usr/local/freeswitch/bin/fs_cli -x  "originate
>> {fax_verbose=true,ignore_early_media=true,absolute_codec_string='PCMU'}user/1006
>> &txfax(/tmp/txfax.tiff)"
>>
>> The machine in question is Canon Mx 512 in fax only mode. Note that I am
>> able to send out fax from this machine and receive it in freeswitch using
>> rxfax. The problem is only in sending fax to this machine using txfax.
>>
>> The complete error log is at paste http://pastebin.freeswitch.org/21151
>> Here are some relevant snippets from error log
>>
>> 2013-07-04 21:23:09.215751 [DEBUG] mod_sofia.c:243 sofia/internal/
>> sip:1006 at 10.2.2.159:8081 SOFIA EXECUTE
>> 2013-07-04 21:23:09.215751 [DEBUG] switch_core_state_machine.c:209
>> sofia/internal/sip:1006 at 10.2.2.159:8081 Standard EXECUTE
>> EXECUTE sofia/internal/sip:1006 at 10.2.2.159:8081 txfax(/tmp/txfax.tiff)
>> 2013-07-04 21:23:09.215751 [DEBUG] mod_spandsp_fax.c:1387 Raw read codec
>> activation Success L16 30000
>> 2013-07-04 21:23:09.215751 [DEBUG] switch_core_codec.c:219 sofia/internal/
>> sip:1006 at 10.2.2.159:8081 Push codec L16:70
>> 2013-07-04 21:23:09.215751 [DEBUG] mod_spandsp_fax.c:1403 Raw write codec
>> activation Success L16
>> 2013-07-04 21:23:09.265748 [DEBUG] switch_rtp.c:3706 Correct ip/port
>> confirmed.
>> 2013-07-04 21:23:09.265748 [DEBUG] switch_core_io.c:759 Engaging Read
>> Buffer at 480 bytes vs 160
>> 2013-07-04 21:23:09.475748 [WARNING] mod_sofia.c:1279 Asynchronous PTIME
>> not supported, changing our end from 30 to 20
>> 2013-07-04 21:23:09.475748 [DEBUG] sofia_glue.c:3037 Changing Codec from
>> PCMU at 30ms@8000hz to PCMU at 20ms@8000hz
>> 2013-07-04 21:23:09.535748 [DEBUG] switch_rtp.c:1873 RE-Starting timer
>> [soft] 160 bytes per 20ms
>> 2013-07-04 21:23:09.535748 [DEBUG] sofia_glue.c:3124 Set Codec
>> sofia/internal/sip:1006 at 10.2.2.159:8081 PCMU/8000 20 ms 160 samples
>> 64000 bits
>> 2013-07-04 21:23:09.555751 [DEBUG] switch_core_io.c:1365 Engaging Write
>> Buffer at 320 bytes to accommodate 480->320
>> 2013-07-04 21:23:12.095748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Carrier up (-2) in state T
>> 2013-07-04 21:23:15.095748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Carrier down (-1) in state T
>> 2013-07-04 21:23:15.155748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Carrier up (-2) in state T
>> 2013-07-04 21:23:15.195750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.235749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.275748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.315750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.355748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.395748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.635748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.715751 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.795749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:15.915751 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal s
>>
>> **** repeats many times ****
>>
>> 2013-07-04 21:23:47.035750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:48.115755 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Abort (-8) in state T
>> 2013-07-04 21:23:48.135749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
>> signal status is Carrier down (-1) in state T
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 T0
>> expired in state T
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Status
>> changing to 'Timed out waiting for initial communication'
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
>> Disconnecting
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
>> Changing from phase A_CNG to E
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set rx
>> type 0
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set tx
>> type 1
>> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
>> Changing from state T to B
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Send
>> complete in phase E, state B
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:511
>> ==============================================================================
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:524 Fax processing
>> not successful - result (2) Timed out waiting for initial communication.
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:529 Remote station
>> id:
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:530 Local station
>> id:  SpanDSP Fax Ident
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:531 Pages
>> transferred: 0
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:533 Total fax pages:
>>   0
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:534 Image
>> resolution:  0x0
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:535 Transfer Rate:
>>   14400
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:537 ECM status
>>   off
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:538 remote country:
>>
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:539 remote vendor:
>>
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:540 remote model:
>>
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:542
>> ==============================================================================
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
>> Changing from state B to CALL_FINISHED
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
>> Changing from phase E to CALL_FINISHED
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set rx
>> type 9
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX FAX
>> exchange complete
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set tx
>> type 9
>> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX FAX
>> exchange complete
>> 2013-07-04 21:23:50.215748 [DEBUG] switch_core_codec.c:244 sofia/internal/
>> sip:1006 at 10.2.2.159:8081 Restore previous codec PCMU:0.
>> 2013-07-04 21:23:50.215748 [NOTICE] switch_core_state_machine.c:262
>> sofia/internal/sip:1006 at 10.2.2.159:8081 has executed the last dialplan
>> instruction, hanging up.
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130705/cbe63b38/attachment-0001.html