[Freeswitch-users] mod_gsmopen: some success - hear crackly unintelligible announcement

[Ashish Mishra]

I hope my question was clear...i meant that how should i enable the sim
,that i had put in dongle, make and receive calls through freeswitch.??
On Aug 25, 2013 2:02 AM, "Ashish Mishra" <itsme.kunnu at gmail.com> wrote:

> Thanks jayanath
> But i mean how to enable the sim u had used in the dongle for making calls
> through mod_gsmopen make and receive calls ?
>
> Regards
> Ashish Mishra
> On Aug 25, 2013 1:21 AM, "Jayanth Acharya" <jayachar88 at gmail.com> wrote:
>
>> Using the default dialplan. I have only 1 dongle at the moment, so doing
>> a telephone -> telephone mapping won't work (well, at least, based on what
>> I've understood so far -- I could be wrong). Tomorrow, I plan to walk
>> through the dialplan to understand it somewhat better. My eyes don't take
>> XML too kindly !!
>>
>> As such no significant changes. The only few hiccups to build, and the
>> previous segfault I got, I filed a JIRA for, and that has the steps I took
>> and my preliminary findings.
>> http://jira.freeswitch.org/browse/FS-5721
>> http://jira.freeswitch.org/browse/FS-5727
>>
>> I used a trick I found in the mail archives to use "wvdial" to identify
>> the control port. After that, set the usb ports for control/audio correctly
>> in the gsmopen.conf.xml file. After this the module started getting loaded
>> properly, but I noticed that the signal strength was too low. Post that, I
>> had to use a long USB extension cable to keep the dongle outside the
>> window, and ensured that signal strength (RSSI) was good enough. After
>> this, the rig started working.
>>
>>
>>
>> On Sun, Aug 25, 2013 at 12:31 AM, Ashish Mishra <itsme.kunnu at gmail.com>wrote:
>>
>>> Hi jaynath
>>> May i ask you what what was was the dialplan which you had used to call
>>> <any indian phone number> to <any indian phone number> in your mod_gsmopen.
>>> Also what did you do with error u received day before yesterday....???
>>>
>>> Regards
>>> Ashish Mishra
>>> On Aug 25, 2013 12:05 AM, "Jayanth Acharya" <jayachar88 at gmail.com>
>>> wrote:
>>>
>>>> Finally, found success with mod_gsmopen. Have to say that there's a
>>>> tonne of information in the Wiki, and it takes a newbie some time to get to
>>>> understand even the elementary things. Jumping right in, assuming defaults
>>>> to take care of everything, doesn't work. I believe that was thanks to
>>>> being connected to the conference bridge 888 at sip.freeswitch.net (if I
>>>> noted the SIP URI correctly).Next tried another inbound call, and this
>>>> time, I heard only silence.
>>>>
>>>> Then I tried sending an SMS. That went out fine and was received
>>>> instantaneously by the destination number. After that, I replied back to
>>>> the dongle's number, and had a telnet session open listening on the events
>>>> (none arrived), but that telnet session was closed, and turning to the FS
>>>> console, I saw that it too had closed with a segmentation fault. So seems
>>>> like receiving the SMS precipitated a core.
>>>>
>>>> Anyone seen similar behaviour ? Should I go ahead an file another JIRA
>>>> bugreport ? File one yesterday regarding another segmentation fault. Note,
>>>> I am on Git HEAD (or was, day before, when I cloned it).
>>>>
>>>> thanks,
>>>> Jay
>>>>
>>>>
>>>> _________________________________________________________________________
>>>> Professional FreeSWITCH Consulting Services:
>>>> consulting at freeswitch.org
>>>> http://www.freeswitchsolutions.com
>>>>
>>>> 
>>>> 
>>>>
>>>> Official FreeSWITCH Sites
>>>> http://www.freeswitch.org
>>>> http://wiki.freeswitch.org
>>>> http://www.cluecon.com
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> 
>>> 
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://wiki.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> 
>> 
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130825/4d70c241/attachment-0001.html