[Freeswitch-users] mod_gsmopen: some success - hear crackly unintelligible announcement

[Ashish Mishra]

Thanks jayanath
But i mean how to enable the sim u had used in the dongle for making calls
through mod_gsmopen make and receive calls ?

Regards
Ashish Mishra
On Aug 25, 2013 1:21 AM, "Jayanth Acharya" <jayachar88 at gmail.com> wrote:

> Using the default dialplan. I have only 1 dongle at the moment, so doing a
> telephone -> telephone mapping won't work (well, at least, based on what
> I've understood so far -- I could be wrong). Tomorrow, I plan to walk
> through the dialplan to understand it somewhat better. My eyes don't take
> XML too kindly !!
>
> As such no significant changes. The only few hiccups to build, and the
> previous segfault I got, I filed a JIRA for, and that has the steps I took
> and my preliminary findings.
> http://jira.freeswitch.org/browse/FS-5721
> http://jira.freeswitch.org/browse/FS-5727
>
> I used a trick I found in the mail archives to use "wvdial" to identify
> the control port. After that, set the usb ports for control/audio correctly
> in the gsmopen.conf.xml file. After this the module started getting loaded
> properly, but I noticed that the signal strength was too low. Post that, I
> had to use a long USB extension cable to keep the dongle outside the
> window, and ensured that signal strength (RSSI) was good enough. After
> this, the rig started working.
>
>
>
> On Sun, Aug 25, 2013 at 12:31 AM, Ashish Mishra <itsme.kunnu at gmail.com>wrote:
>
>> Hi jaynath
>> May i ask you what what was was the dialplan which you had used to call
>> <any indian phone number> to <any indian phone number> in your mod_gsmopen.
>> Also what did you do with error u received day before yesterday....???
>>
>> Regards
>> Ashish Mishra
>> On Aug 25, 2013 12:05 AM, "Jayanth Acharya" <jayachar88 at gmail.com> wrote:
>>
>>> Finally, found success with mod_gsmopen. Have to say that there's a
>>> tonne of information in the Wiki, and it takes a newbie some time to get to
>>> understand even the elementary things. Jumping right in, assuming defaults
>>> to take care of everything, doesn't work. I believe that was thanks to
>>> being connected to the conference bridge 888 at sip.freeswitch.net (if I
>>> noted the SIP URI correctly).Next tried another inbound call, and this
>>> time, I heard only silence.
>>>
>>> Then I tried sending an SMS. That went out fine and was received
>>> instantaneously by the destination number. After that, I replied back to
>>> the dongle's number, and had a telnet session open listening on the events
>>> (none arrived), but that telnet session was closed, and turning to the FS
>>> console, I saw that it too had closed with a segmentation fault. So seems
>>> like receiving the SMS precipitated a core.
>>>
>>> Anyone seen similar behaviour ? Should I go ahead an file another JIRA
>>> bugreport ? File one yesterday regarding another segmentation fault. Note,
>>> I am on Git HEAD (or was, day before, when I cloned it).
>>>
>>> thanks,
>>> Jay
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> 
>>> 
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://wiki.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> 
>> 
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130825/0b88be53/attachment.html